Претраживање
Приказ резултата 11-20 од 77
The effects of a magnetic field on the morphologies of nickel and copper deposits: The concept of 'effective overpotential' / Uticaj primenjenih magnetnih polja na morfologije taloga nikla i bakra - koncept 'efektivne prenapetosti'
(Serbian Chemical Society, 2007)
The morphologies of nickel and copper deposits obtained without applied magnetic fields, and with both parallel and perpendicular applied magnetic fields were examined by the scanning electron microscopy (SEM) technique. ...
The role of surface defects in HOPG on the electrochemical and physical deposition of Ag / Uloga površinskih defekata na HOPG-u u elektrohemijskoj I fizičkoj depoziciji Ag
(Belgrade : Serbian Chemical Society, 1999)
The role of defects on a substrate surface during the initial stages of nucleation and growth of Ag deposited electrochemically and physically on highly oriented pyrolytic graphite (HOPG) has been observed ex situ by ...
Formation of Disperse Silver Deposits by the Electrodeposition Processes at High Overpotentials
(Esg, Belgrade, 2012)
In this study, electrodeposition of silver from nitrate solution at the high overpotentials was analyzed. Morphologies of silver deposits obtained at the different overpotentials and with the different electrodeposition ...
The effect of hydrogen co-deposition on the morphology of copper electrodeposits. II. Correlation between the properties of electrolytic solutions and the quantity of evolved hydrogen
(Elsevier, 2008)
Formation of irregular deposits by electrodeposition from acid sulfate solutions of various H2SO4 concentrations was examined by the determination of the average current efficiency of hydrogen evolution and by the scanning ...
Formation of the honeycomb-like electrodes by the regime of pulsating overpotential in the second range
(International Association of Physical Chemists (IAPC), 2012)
In this study the honeycomb-like copper structures electrodeposited by the regime of pulsating overpotential in the second range were analyzed by the technique of scanning electron microscopy. The overpotential amplitude ...
Hardness response and adhesion of thin copper films on alloy substrates
(Belgrade: ETRAN – Society for electronics, telecommunication, computing, automatics and nuclear engineering, 2017)
Microhardness test is the most commonly used
method for assessing the mechanical properties of thin films.This testing method uses controlled contact at a single point of an indenter and chosen material which induces the ...
Effect of temperature on the electrodeposition of disperse copper deposits / Uticaj temperature na elektrohemijsko taloženje disperznih taloga bakra
(Serbian Chemical Society, 2007)
The effect of temperature on the electrodeposition of copper at overpotentials belonging to the plateau of the limiting diffusion current density and higher was examined by the determination of the average current efficiency ...
Determination of the absolute hardness of electrolytically produced copper coatings by application of the Chicot-Lesage composite hardness model / Одређивање апсолутне тврдоће електролитички добијених превлака бакра применом Chicot-Lesage композитног модела тврдоће
(Belgrade : Serbian Chemical Society, 2022)
In this study, a novel procedure, based on application of the Chicot–Lesage (C–L) composite hardness model, was proposed for the determination of an absolute hardness of electrolytically produced copper coatings. The Cu ...
Electrodeposition of Aluminium-Vanadium Alloys from Chloroaluminate Based Molten Salt Containing Vanadium Ions
(MDPI, 2021)
The Al-V alloys were synthetized by potentiostatic electrodeposition onto a glassy carbon electrode from equimolar AlCl3 + NaCl bath containing vanadium ions at 200 °C. The alloy deposits were characterized by X-ray ...
Comparative analysis of the polarization and morphological characteristics of electrochemically produced powder forms of the intermediate metals
(Macedonian Journal of Chemistry and Chemical Engineering, 2014)
The polarization and morphological characteristics of powder forms of the group of the intermediate metals were examined by the analysis of silver and copper electrodeposition processes at high overpotentials. The pine-like ...