Претраживање
Приказ резултата 1-10 од 89
Analysis of efficiency and reaction rate degradation of cyanide under the influence of current density on steel electrodes / Analiza efikasnosti i brzine reakcije uklanjanja cijanida u zavisnosti od gustine struje na čeličnim elektrodama
(Belgrade, Serbia : Engineering Society for Corrosion, 2013)
Electrolytic treatment of wastewater is a technique in which wastewater is treated by applying electric current through electrodes in the electrochemical reactor. This is actually a combination of many processes such as ...
Ternary Bi-Cu-Ni alloys – thermodynamics, characterization, mechanical and electrical properties
(Serbia : Association of Metallurgical Engineers of Serbia, 2017)
The Bi–Cu–Ni ternary system belongs to the group of potential Cu-Ni-based advanced lead-free solder materials for high temperature application. The paper shows results of the thermodynamic calculations using general solution ...
Wear resistance improvement of thermal plant fan mill impact plates based on numerical flow simulation
(Society for Structural Integrity and Life, Institute for Material Testing, 2017)
Numerical simulation of 3D multiphase flow is performed to determine the velocity field in the fan mill. The mixture model of the Euler-Euler approach is used. Recirculating gas is a primary phase that carries granular ...
Treatment of waste sulfuric acid copper electrolyte / Tretman otpadnog sumporno-kiselog elektrolita bakra
(Institut za rudarstvo i metalurgiju Bor, 2014)
The aim of this paper was to investigate the possibility of using the copper anodes with high nickel content for electrolytic treatment of waste sulfuric acid copper electrolyte. Nickel content in each anode was about 10 ...
Occurence of Botryococcus terribilis Komárek & Marvan in the small sand pit lake – first report from Serbia
(Novi sad : Matica Srpska, 2021)
Alkaline saline ponds and lakes are habitats with unique biodiversity. The green alga of the genus Botryococcus was accidentally discovered during a micro-algal survey of these habitats in Serbia. Species B. terribilis was ...
Effect of chemical composition on microstructure, hardness and electrical conductivity profiles of the Bi-Cu-Ga alloys at 100 °C
(Serbia : Association of Metallurgical Engineers of Serbia, 2016)
Theoretical calculation and experimental investigation of the isothermal section of a ternary Bi-Cu-Ga system at 100 oC are presented in this paper. Thermodynamic binary-based calculation of the isothermal section was ...
Influence of process parameters on properties of the 4a zeolite with X-ray and FT-IR instrumental methods characterization / Uticaj procesnih parametara na osobine 4a zeolita uz karakterizaciju X-ray i FT-IR instrumentalnim metodama
(Inženjersko društvo za koroziju, 2018)
For more than three decades 4A zeolite has been an irreplaceable ingredient of powder
detergents, but there is still striving to it’s improvement in order to meet the ever more stringent
market and environmental ...
Field applicable methods for intergranular corrosion testing of stainless steels structures / Metode ispitivanja interkristalne korozije na konstrukcijama od nerđajućh čelika na terenu
(Society for Structural Integrity and Life, 2016)
Determination of the susceptibility of austenitic stainless steel X5CrNi18-10 to intergranular corrosion (IGC) is performed by measuring the corrosion potential Ecorr in a drop of a test solution with specific chemical ...
The influence of chemical composition on microstructure, hardness and electrical conductivity of Ag-Bi-In alloys at 100 degrees C
(Serbia : Association of Metallurgical Engineers of Serbia AMES, 2017)
Considering possible applications and scarceness of literature data, Ag-Bi-In system was investigated in terms of microstructure, mechanical and electrical properties of ternary alloys from an isothermal section at 100 °C. ...
Molecular descriptors as proxies for the modeling of the materials and their environmental impact / Računarski generisani molekulski deskriptori kao proxi-ji za modelovanje materijala i njihovog uticaja
(Belgrade : Engineering Society for Corrosion, 2016)
For the prediction of material's properties and of interaction of molecules with the surroundings, one needs to know their properties. Usually, the molecular properties are revealed through experimental measurements. It ...