Претраживање
Приказ резултата 1-10 од 16
Thermal and microstructural analysis of the low-melting Bi-In-Pb alloy
(Association of Metallurgical Engineers of Serbia (AMES), 2020)
Low-melting alloys, based on bismuth and indium, have found commercial use in soldering, safety devices, coatings, and bonding applications. In this respect, the accurate knowledge of their thermal properties such ...
Characterization of carbon fibrous material from platanus achenes as platinum catalysts support
(Serbia : Association of Metallurgical Engineers of Serbia, 2020)
Carbon materials with developed porosity are usually used as supports for platinum catalysts. Physico-chemical characteristics of the support influence the properties of platinum deposited and its catalytic activity. In ...
Thermal and microstructural analysis of the low-melting Bi-In-Pb alloy
(Serbia : Association of Metallurgical Engineers of Serbia, 2020)
Low-melting alloys, based on bismuth and indium, have found commercial use in soldering, safety devices, coatings, and bonding applications. In this respect, the accurate knowledge of their thermal properties such as melting ...
Chemical composition of hyssop cv. 'Domaći ljubičasti' essential oil and its antimicrobial activity / Hemijski sastav etarskog ulja miloduha kultivara 'Domaći ljubičasti' i ocena antimikrobne aktivnosti
(Belgrade : Centre for Evaluation in Education and Science, 2021)
Hyssop (Hyssopus officinalis L., Lamiaceae) is a perennial shrub or subshrub violet-blue flowers in verticillasters and spicy taste with a pungent flavour. Besides being used as a culinary herb for flavouring and food ...
Mercury pollution of sediments from the river Tisa (Serbia)
(Novi sad : Matica srpska, 2020)
Mercury (Hg) has been listed as a global high priority pollutant by many international organizations due to its mobility and persistence in the environments and high toxicity to organisms. This research was conducted with ...
Corrosion characteristics of laser-cleaned surfaces on iron artefact / Koroziona svojstva laserski čišćenih površina na artefaktu od gvožđa
(Belgrade : Engineering Society for Corrosion, 2020)
Nd:YAG laser was used for cleaning surfaces of cultural heritage iron artefacts covered with
corrosion products. The corrosion products were removed without damaging the base material.
Three different electrochemical ...
Thermal characterization of the In–Sn–Zn eutectic alloy
(Belgrade : Association of Metallurgical Engineers of Serbia, 2020)
Thermal properties, including melting temperature, latent heat of melting, specific heat capacity and thermal conductivity, of a low-melting In–Sn–Zn eutectic alloy were investigated in this work. The In–Sn–Zn eutectic ...
Thermal transport properties and microstructure of the solid Bi-Cu alloys
(Belgrade : Association of Metallurgical Engineers of Serbia ( AMES ), 2022)
Thermal transport properties of solid Bi-Cu alloys have been investigated over a wide composition range and temperature range ranging from 25 to 250 °C. The flash method was used to determine thermal diffusivity. Thermal ...
Past studies and potential measures for rehabilitation of the shallow lake (Lake Ludas)
(Geographical Institute “Jovan Cvijić” SASA, 2020)
Lake Ludaš has been under a strong anthropogenic influence for a very long time, so the history of fruitful scientific investigation was very often connected with the evaluation of a human impact and potential rehabilitation ...
Application of Additive Technology and Reverse Engineering in the Realization of Damaged Obsolete Parts / Примена адитивне технологије и реверзибилног инжењерства у реализацији оштећених застарелих делова
(Beograd : Mašinski fakultet, 2023)
Reverse engineering (RE) aims to design a new replacement part based on
the existing part. The goal is to perform a quality reproduction of the
physical part with the best possible mechanical characteristics aiming ...