Претраживање
Приказ резултата 1-10 од 11
Implementation of the Chicot–Lesage Composite Hardness Model in a Determination of Absolute Hardness of Copper Coatings Obtained by the Electrodeposition Processes
(MDPI, 2021)
The influence of various electrolysis parameters, such as the type of cathode, composition of the electrolyte and electrolysis time, on the morphology, structure and hardness of copper coatings has been investigated. ...
Synthesis, Characterization, Catalytic Activity, and DFT Calculations of Zn(II) Hydrazone Complexes
(MDPI, 2020)
Two new Zn(II) complexes with tridentate hydrazone-based ligands (condensation products of 2-acetylthiazole) were synthesized and characterized by infrared (IR) and nuclear magnetic resonance (NMR) spectroscopy and single ...
Electrodeposition of Nd and Pr onto W from fluoride based melts / Elektrohemijsko taloženje Nd i Pr na W iz fluoridnih rastopa
(Belgrade : Serbian Society of Corrosion and Materials Protection (UISKOZAM), 2021)
Electrodeposition of neodymium and praseodymium metal from molten NdF3+PrF3+LiF+ 0.5wt.%Pr6O11+0.5wt.%Nd2O3 electrolytes on W was investigated using voltammetry at 1050 °C. The square wave voltammetry confirmed that Nd ...
Morphology and Structure of Electrolytically Synthesized Tin Dendritic Nanostructures
(MDPI, 2022)
The formation of tin dendritic nanostructures by electrolysis from the alkaline electrolyte
has been investigated. Morphology and structure of Sn dendrites produced applying both potentiostatic and galvanostatic regimes ...
Morphological and Structural Characterization of Tin Dendritic Nanostructures Produced by Various Electrodeposition Processes
(Belgrade : Serbian Academy of Sciences and ArtsBelgrade : Faculty of Technology and Metallurgy, University of Belgrade, 2022)
In this study, Sn powders were electrodeposited from an alkaline electrolyte containing 20 g/l SnCl2 × 2H2O in 250 g/l NaOH at the room temperature by application of both potentiostatic and
galvanostatic regimes of the ...
Electrochemical study of Nd and Pr co-deposition onto Mo and W from molten oxyfluorides
(MDPI, 2021)
Electrodeposition processes of neodymium and praseodymium in molten NdF3 + PrF3 + LiF + 1 wt.%Pr6O11 + 1 wt.%Nd2O3 and NdF3 + PrF3 + LiF + 2 wt.%Pr6O11 + 2 wt.%Nd2O3 electrolytes at 1323 K were investigated. Cyclic ...
Influence of Rare Earth Oxide Concentration on Electrochemical Co-Deposition of Nd and Pr from NdF3-PrF3-LiF Based Melts
(Switzerland : Multidisciplinary Digital Publishing Institute (MDPI), 2022)
The impact of rare earth oxide (REO) concentration on the deposition process and selective recovery of the metal being deposited from a molten fluoride salt system was investigated by applying deposition of Nd and Pr and ...
Influence of cobalt loading on the physical-chemical properties of pillared clay - supported cobalt
(Society of Physical Chemists of Serbia, 2021)
The aluminum pillared clay (AP) was synthesized and impregnated with various cobalt loadings (x%CoAP, x=1, 3, 5, and 10 wt.%) by incipient wetness impregnation method. All samples were characterized by using X-ray powder ...
Electrochemical Deposition of Al-Ti Alloys from Equimolar AlCl3 + NaCl Containing Electrochemically Dissolved Titanium
(MDPI, 2020)
Al-Ti alloys were electrodeposited from equimolar chloroaluminate molten salts containing up to 0.1 M of titanium ions, which were added to the electrolyte by potentiostatic dissolution of metallic Ti. Titanium dissolution ...
Flat band and photocatalytic activities of alumina/zirconia composite ceramics
(Srpsko keramičko društvo, 2022)
In the scope of this study mesoporous coupled alumina/zirconia composites were synthesized
via the sol-gel method, followed by heat treatment at 500°C, for 5h. The XRD pattern of
composites has shown that the addition ...