Претраживање
Приказ резултата 11-20 од 79
Corrosion causes in thermal power plants and ways of prevention / Uzroci korozije u termoenergetskim postrojenjima i načini prevencije
(Belgrade, Serbia : Engineering Society for Corrosion, 2009)
Corrosion damages often exert considerable influence on outages number and hence on the loss of thermal power plant availability. In order to accomplish the aim of reducing the corrosion to it's minimum and prevent main ...
Catalytic activity of sulfuric acid on the morphology of electrochemically obtained copper powder / Katalitičko delovanje sumporne kiseline na morfologiju elektrohemijski dobijenog bakarnog praha
(Belgrade, Serbia : Engineering Society for Corrosion, 2015)
The subject of the research is influence of sulfuric acid on morphology of electrochemically obtained copper powder during galvanostatic electrolysis mode. In this paper electrodeposition of copper powder from sulphate ...
Electrolysis conditions for obtaining cupric oxide (CUO) / Uslovi dobijanja bakar (II) oksida elektrolitičkim putem
(Belgrade, Serbia : Engineering Society for Corrosion, 2009)
Conditions for obtaining copper powder with different regimes of electrolysis [potentiostatic, galvanostatic and programmed current-voltage regimes ( periodically changing rate)] and effects on it's morphology and ...
Direct synthesis of noble metal nanostructures on carbon support by hydrothermal process / Direktna sinteza nanostrukturnog plemenitog metala na ugljeničnoj osnovi pomoću hidrotermalnog procesa
(Belgrade, Serbia : Engineering Society for Corrosion, 2015)
Nanostructures of noble metals (Pt and Ag) on carbon support were prepared from fructose and solution of the Nobel metal salts (H2PtCl6 x 6H2O or AgNO3) under hydrothermal conditions. Commercial fructose (C6H12O6) acts as ...
The roughness analysis of metal coatings by STM technique: Part I: Theoretical survey / Analiza hrapavosti galvanskih prevlaka tehnikom skenirajuće tunelske mikroskopije - deo I - teorijski osnovi
(Belgrade, Serbia : Engineering Society for Corrosion, 2002)
In this work is given theoretical base of methodology which, by use STM technique and corresponding STM software, offers an good conveniences for the examination of mechanism of electrode position process.
Comparison of morphology of powder particles obtained by the constant and periodically changing regimes of electrolysis / Poređenje morfologije čestica praha dobijenih konstantnim i periodično promenljivim režimima elektrolize
(Belgrade, Serbia : Engineering Society for Corrosion, 2011)
Morphologies of copper powder particles obtained by both potentiostatic and pulsating overpotential (PO) regimes of electrolysis were analyzed using the technique of scanning electron microscopy (SEM). The parameters of ...
The roughness analysis of metal coatings by STM technique: Part II: Analysis of zinc coatings / Analiza hrapavosti galvanskih prevlaka tehnikom skenirajuće tunelske mikroskopije - deo II - analiza prevlaka cinka
(Belgrade, Serbia : Engineering Society for Corrosion, 2002)
In this work is given the analysis of roughness of zinc coatings electrodeposited from a sulfate bath in the presence of dextrin and 2-hidroxi-benzaldehyde, by methodology which is described in part I of this work. It was ...
Fundamental aspects of lead electrodeposition processes: Nucleation and growth / Fundamentalni aspekti procesa elektrohemijskog taloženja olova - nukleacija i rast
(Belgrade, Serbia : Engineering Society for Corrosion, 2016)
In this comprehensive study, the processes of nucleation and growth of lead from electrolytes of various kind and compositions have been analyzed. The processes of Pb nucleation were examined by the analysis of potentiostatic ...
Electrochemical aspects of formation of dendrites / Elektrohemijski aspekti formiranja dendrita
(Belgrade, Serbia : Engineering Society for Corrosion, 2016)
The one of the main contributions of Belgrade Electrochemical School to the field of metal electrodeposition is investigation of a mechanism of formation and growth of the disperse deposits. Spongy-like, cauliflower-like, ...
Catalytic effect of sulphuric acid in the process of deposition of chromium coatings / Katalitički uticaj sumporne kiseline u procesu taloženja prevlaka hroma
(Belgrade, Serbia : Engineering Society for Corrosion, 2011)
This paper analyzes the catalytic effect of sulphuric acid on current efficiency, the coating thickness and the rate of deposition of electrochemical chromium coatings. According to the properties of chrome, there are three ...