Претраживање
Приказ резултата 21-30 од 37
Testing the protective ability of corrosion inhibitors in dilute chloride solutions / Ispitivanje zaštitne sposobnosti inhibitora korozije u razblaženim rastvorima hlorida
(Belgrade, Serbia : Engineering Society for Corrosion, 2017)
After sterilization of meat cans in a factory of meat and meat products in Serbia, occurence of corrosion on the can lids was observed. Sterilization of cans is usually performed in the presence of corrosion inhibitors. ...
Determination of the weld metal corrosion rate using electrochemical techniques / Određivanje brzine korozije metala šava u zavarenom spoju pomoću elektrohemijskih tehnika
(Belgrade, Serbia : Engineering Society for Corrosion, 2015)
To determine corrosion rate of the base metal and weld metal were applied electrochemical techniques: linear polarization resistance, linear sweep voltammetry and electrochemical impedance spectroscopy. The samples were ...
Direct synthesis of noble metal nanostructures on carbon support by hydrothermal process / Direktna sinteza nanostrukturnog plemenitog metala na ugljeničnoj osnovi pomoću hidrotermalnog procesa
(Belgrade, Serbia : Engineering Society for Corrosion, 2015)
Nanostructures of noble metals (Pt and Ag) on carbon support were prepared from fructose and solution of the Nobel metal salts (H2PtCl6 x 6H2O or AgNO3) under hydrothermal conditions. Commercial fructose (C6H12O6) acts as ...
Chemical investigation of miscanthus × giganteus Greef et Deu. Cultivated in Serbia: A potential renewable source of energy / Hemijska ispitivanja miskantusa gajenog u Srbiji - potencijalni obnovljiv izvor energije
(Belgrade, Serbia : Engineering Society for Corrosion, 2016)
According to scientific community and professional specialists, urging necessity to increase capacity of sources of energy can be partially achieved by using biomass as a raw material. This approach is justified by both ...
Laser cleaning of the archaeological metal sample from the Danube / Istraživanje mogućnosti primene lasera u čišćenju arheoloških metalnih predmeta
(Belgrade, Serbia : Engineering Society for Corrosion, 2018)
The paper presents the results of laser cleaning of corrosive and other deposits on a metal archaeological artefact from the Danube. Nd: YAG laser, energy up to 750 mJ and wavelengths λ = 1064 nm and 532 nm is used. The ...
Solvatochromism of N-aryl-phenylacetamides / Solvatohromizam N-aril-fenilacetamida
(Belgrade, Serbia : Engineering Society for Corrosion, 2016)
Amide derivates are biologically active compounds and they are widely used in all spheres of life. Therefore, it is very important to know their physical-chemical properties. In this work the influence of characteristics ...
The kinetics of passivation based on the reduction of current density under potentiostatic conditions for a martensitic stainless steel / Kinetika pasivizacije bazirane na redukciji gustine struje pri potenciostatskim uslovima za martenzitni nerđajući čelik
(Belgrade, Serbia : Engineering Society for Corrosion, 2016)
The potentiostatic method and the theory of 'topochemical reactions' in the kinetics of the active dissolution and passivation process of AISI 420 stainless steel were studied. It was found that, to a great extent, the ...
CO tolerant Pt/Ru0.7Ti0.3O2 nanocatalyst for hydrogen oxidation reaction / Pt/Ru0,7Ti0,3O2 kao nanokatalizator za oksidaciju vodonika i njegova tolerancija na CO
(Belgrade, Serbia : Engineering Society for Corrosion, 2018)
The oxidation of pure H2 and H2/CO mixture (100 ppm CO) was investigated on Pt nanocatalyst supported on Ru0.7Ti0.3O2 (Pt /Ru0.7Ti0.3O2) by linear sweep voltammetry at a rotating disc electrode in 0.1 M HClO4. The results ...
Influence of welding current intensity on pitting corrosion resistance in welded joint of stainless steel X5CrNi18-10 / Uticaj jačine struje zavarivanja na otpornost prema piting koroziji zavarenog spoja nerđajućeg čelika X5CrNi18-10
(Belgrade, Serbia : Engineering Society for Corrosion, 2017)
The effect of welding current on the pitting corrosion resistance in the welded joint of austenitic stainless steel X5CrNi18-10 was tested. Welding was carried out using three different current intensity (110 A, 130 A and ...
Influence of the synthesis procedures on pt catalyst activity for ethanol electrooxidation reaction / Uticaj postupka sinteze na aktivnost platinskih katalizatora za reakciju elektrooksidacije etanola
(Belgrade, Serbia : Engineering Society for Corrosion, 2016)
Carbon supported platinum catalysts for ethanol electrooxidation were synthesized by modified polyol synthesis method, assisted by microwave or reflux heating. Synthesized catalysts were characterized by XRD, STM and TGA ...