Pretraživanje
Prikaz rezultata 1-10 od 38
Implementation of the Chicot–Lesage Composite Hardness Model in a Determination of Absolute Hardness of Copper Coatings Obtained by the Electrodeposition Processes
(MDPI, 2021)
The influence of various electrolysis parameters, such as the type of cathode, composition of the electrolyte and electrolysis time, on the morphology, structure and hardness of copper coatings has been investigated. ...
Mechanical features of copper coatings electrodeposited by the pulsating current (PC) regime on Si(111) substrate
(Electrochemical Science Group (ESG), 2020)
Mechanical features of the Cu coatings produced by the pulsating current (PC) regime on Si(111)
substrate have been investigated. The Cu coatings were electrodeposited by varying duty cycle (15−50 %) and keeping the current ...
Effect of the electrolysis regime on the structural characteristics of honeycomb-like electrodes
(Soc Chemists Technologists Madeconia, Skopje, 2013)
The effect of different current regimes of electrolysis on the micro- and nanostructural characteristics of open porous structures was examined by the analysis of honeycomb-like copper electrodes obtained by constant ...
Morphology, structure and hardness of electrolytically produced copper coatings
(Sarajevo : Faculty of Science University of Sarajevo, 2022)
Influence of various parameters of electrodeposition, such as type of cathode, composition of the electrolyte and thickness of the coating, on morphology, structure and hardness of copper coatings has been investigated.
Effect of temperature on the electrodeposition of disperse copper deposits / Uticaj temperature na elektrohemijsko taloženje disperznih taloga bakra
(Serbian Chemical Society, 2007)
The effect of temperature on the electrodeposition of copper at overpotentials belonging to the plateau of the limiting diffusion current density and higher was examined by the determination of the average current efficiency ...
Magnetic effects in electrochemistry / Magnetni efekti u elektrohemiji
(Serbian Chemical Society, 2005)
The effect of imposed magnetic fields onto the electrodeposition of magnetic (nickel) and non – magnetic (copper) metals was analysed. Also, magnetic properties of electrochemically obtained nanocontacts were examined. An ...
The effects of a magnetic field on the morphologies of nickel and copper deposits: The concept of 'effective overpotential' / Uticaj primenjenih magnetnih polja na morfologije taloga nikla i bakra - koncept 'efektivne prenapetosti'
(Serbian Chemical Society, 2007)
The morphologies of nickel and copper deposits obtained without applied magnetic fields, and with both parallel and perpendicular applied magnetic fields were examined by the scanning electron microscopy (SEM) technique. ...
Optical properties of plastically deformed copper: an ellipsometric study
(Institute of Metals and Technology, 2011)
In this paper the results of optical properties investigations on plastically deformed copper are presented. The optical properties of the plastically deformed copper were studied using spectroscopic ellipsometry in the ...
Treatment of waste sulfuric acid copper electrolyte / Tretman otpadnog sumporno-kiselog elektrolita bakra
(Institut za rudarstvo i metalurgiju Bor, 2014)
The aim of this paper was to investigate the possibility of using the copper anodes with high nickel content for electrolytic treatment of waste sulfuric acid copper electrolyte. Nickel content in each anode was about 10 ...
Elektrohemijsko dobijanje i morfologija čestica bakarnog praha dobijenog pri različitim retimima elektrolize / Electrodeposition and morphology of copper powder particles obtained at different current regimes
(Bosnia and Herzegovina : University of East Sarajevo, Faculty of Technology, 2009)
Ispitivan je uticaj različitih reţima elektrolize (konstantna i reversna struja) na morfologiju bakarnog praha. Morfologija istaloţenog bakarnog praha je proučavana pomoću skening elektronskog mikroskopa (SEM). Diskutovan ...