Search
Now showing items 41-50 of 1411
Fluorination as a Driving Force in Crystal Structures
(Commission on Quantum Crystallography of IUCr, 2020)
The results of the crystallographic analysis in combination with quantum chemical calculations have
shown that fluorination of organic compounds causes an increase in the proton-donating ability and a
decrease in the ...
Prečišćavanje otpadnih voda primenom ozonizacije / Purification of waste water using ozonization
(Beograd : Beogradska politehnika, 2019)
Usled razvoja industrije i rastom populacije tokom poslednjih godina javljaju se
problemi u vezi sa otpadnim vodama iz proizvodnje koje je neophodno rešavati na ekološki i
ekonomičan način. Sve otpadne vode iz postrojenja ...
Intensification of a chemical reactor for methanol synthesis through forced periodic operations- Evaluation based on Nonlinear Frequency Response Analysis
(2nd International Process Intensification Conference, Leuven, Belgium, 2019)
In this work, the NFR method is implemented for evaluation of possible improvement for the reaction of methanol synthesis by hydrogenation of CO and CO2, using a standard Cu/ZnO/Al2O3 catalyst. For start, a forced periodically ...
Surface Texture Parameters in Optimizing Magnetic Force Images
(Belgrade : Astronomical Observatory, 2008)
In this work, the optimizing conditions necessary for magnetic field gradient imaging using Atomic Force Microscopy (AFM) and Magnetic Force Microscopy (MFM) in a lift mode have been established. 55 nm thick Co thin film ...
Evaluating the Potential of Forced Periodic Operations of Chemical Reactors- The Nonlinear Frequency Response Approach
(XXII International Conference on Chemical Reactors (CHEMREACTOR-22), London, UK, 2016)
One way to achieve process intensification is to operate the process in a periodic way, by cycling one or more input variables, in order to obtain better average performance compared to the optimal steady-state operation. ...
Effect of Nickel Salts on the Dispersion of Nickel and Reducibility of Supported Ni-Mg Catalyst Precursors Prepared by Precipitation-Deposition
(Belgrade : Society of Physical Chemists of Serbia, 2016)
Diatomite supported Ni-Mg catalyst precursors (Ni-Mg/D) with a constant Ni/Mg ratio, prepared by the precipitation-deposition method using different nickel salts, sulfamate, nitrate, chloride, acetate or formate, were ...
Polyphenol profile and anti-tyrosinase potential of the polypore mushrooms Formitopsis pinicola and Ganoderma lucidum
(Serbian Society for Microbiology, 2024)
Tyrosinase is widely present in plants and mushrooms
and is responsible for enzymatic browning
reactions in damaged foodstuff. Accordingly, its
inhibitors act as anti-browning compounds and
have an important role in ...
Dimensional accuracy and experimental investigation on tensile behavior of various 3D printed materials
(The Military Technical Institute, Belgrade, Serbia, 2020)
Additive manufacturing (AM) or 3D printing is becoming very popular in the aerospace and defense industry
because of its ability to manufacture complex parts at a low price. Fused deposition modeling (FDM) is one of the ...
Customization of evanescent near fields on freestanding plasmonic nanomembranes
(Belgrade: ETRAN – Society for electronics, telecommunication, computing, automatics and nuclear engineering, 2018)
For a very long time optical evanescent near fields have been considered useless for practical applications and remained a theoretical curiosity. However, with advances in micro and nanotechnologies and the decreasing sizes ...
A New Colored Substrate for Screening of Beta-Glucanases-Degrading Microorganisms
(Society of Physical Chemists of Serbia, 2016)
Novel chromogenic macromolecular substrate was synthesized by covalently coupling of branched β-glucan isolated from the cell-wall of baker’s yeast S. cerevisiae with anthraquinone reactive dye Remazol Brilliant Blue R ...