Search
Now showing items 1-10 of 51
Morphology, Structure and Mechanical Properties of Copper Coatings Electrodeposited by Pulsating Current (PC) Regime on Si(111)
(MDPI, 2020)
Copper electrodeposition on (111)-oriented Si substrate was performed by the pulsating current (PC) regime at various average current densities in the range of 15–70 mA·cm−2, obtained by varying either the frequency (30, ...
Hydrogen evolution on Ni/WC composite coatings
(Springer, 2006)
The catalytic activity for the hydrogen evolution reaction (HER) of Ni/WC composites obtained by electrochemical
deposition of nickel from a conventional Watt’s bath, using two different ways of depositing the WC particles, ...
Electrochemically deposited Ni+WC composite coatings obtained under constant and pulsating current regimes
(Netherlands : Kluwer Academic Publishers, 2004)
A series of Ni þ WC composite coatings were obtained by electrodeposition on a rotating disc electrode (RDE)
from a commercially available Watts bath containing additives for brightness and smoothing and insoluble ...
Influence of electrodeposition regime and Sn:Pd ratios in Sn-Pd electrocatalysts on ethanol oxidation reaction / Влијание на режимот на електродепозицијата и на односите на Sn:Pd во Sn-Pd-електрокатализаторите врз оксидацијата на етанолот
(Society of Chemists and Technologists of MacedoniaSs. Cyril and Methodius University in Skopje, 2023)
A series of bimetallic Sn-Pd catalysts were prepared by a template-free two step electrodeposition method. According to this method, Sn was electrodeposited firstly in potentiostatic or galvanostatic regime on Cu electrodes ...
Electrodeposition of cobalt powders with novel three-dimensional structure
(Metalurgija, 2011)
Novel three-dimensional cobalt powder structures were successfully prepared by electrodeposition. Electrodeposited cobalt powder was characterized by scanning electron microscopy (SEM) and light microscopy. It was possible ...
Phase-structure analysis of brass by anodic linear-sweep voltammetry
(Springer, 1992)
Anodic linear-sweep voltammetry (ALSV) was applied to electrodeposited alloy layers and to metallurgically obtained Cu−Zn alloys of different composition and structure. Metallurgically obtained samples covered the range ...
Magnetoresistance Controls Arboreous Bead-Dendritic Growth of Magnetic Electrodeposits: Experimental and Theoretical Results
(The Electrochemical Society, Inc., 2004)
The effect of magnetic fields applied on magnetic metals electrodeposition was examined. Nickel deposits obtained from a Watt solution with coumarin, at cathodic potentials of -1000, -1200, and -1300 mV/SCE, without and ...
Electrochemical study of Nd and Pr co-deposition onto Mo and W from molten oxyfluorides
(MDPI, 2021)
Electrodeposition processes of neodymium and praseodymium in molten NdF3 + PrF3 + LiF + 1 wt.%Pr6O11 + 1 wt.%Nd2O3 and NdF3 + PrF3 + LiF + 2 wt.%Pr6O11 + 2 wt.%Nd2O3 electrolytes at 1323 K were investigated. Cyclic ...
The electrochemical deposition and corrosion stability of Zn-Mn alloy coatings / Elektrohemijsko taloženje i koroziona stabilnost prevlaka Zn-Mn legura
(Belgrade, Serbia : Engineering Society for Corrosion, 2010)
The influence of the type of the deposition solution on the current efficiency during electrodeposition of Zn-Mn alloys was examined. The Zn-Mn alloys were deposited on steel from chloride, sulphate and pyrophosphate plating ...
Mechanical Properties of Electrolytically Produced Copper Coatings Reinforced with Pigment Particles
(MDPI, 2023)
Copper from sulfate baths without and with added inorganic pigment particles based on strontium aluminate doped with europium and dysprosium (SrAl2O4: Eu2+, Dy3+) was electrodeposited on a brass cathode by a galvanostatic ...