Претраживање
Приказ резултата 71-79 од 79
The effect of preparation of aluminum surface on surface roughness / Uticaj pripreme površine aluminijuma na površinsku hrapavost
(Belgrade, Serbia : Engineering Society for Corrosion, 2004)
Aluminum samples were electrochemically polished in one of three solutions for electrochemical polishing. On those samples the surface roughness was measured. The effect of the anode treatment on surface roughness was also ...
Direct electroplating of copper coatings onto aluminum / Neposredno elektrohemijsko taloženje prevlaka bakra na aluminijum
(Belgrade, Serbia : Engineering Society for Corrosion, 2005)
The deposition of copper coatings has been done by direct electrochemical deposition from the solution: CuSO4 (55 g/dm3) + CH2 NH2 - CH2OH (100 g/dm3) + (NH4)2SO4 (30 g/dm3) + Na2SO4*10H2O (75 g/dm3) + Na2CO3 (3 g/dm3), ...
The effect of preparation of aluminum surface on surface reflection / Uticaj pripreme površine aluminijuma na površinsku refleksiju
(Belgrade, Serbia : Engineering Society for Corrosion, 2004)
Aluminum samples were electrochemically polished in one of three solutions for electrochemical polishing. On those samples the surface reflection was measured. The effect of the anode treatment as the interface between the ...
Electroplating of silver onto aluminum and its alloys / Elektrohemijsko taloženje prevlaka srebra na aluminijum i njegove legure
(Belgrade, Serbia : Engineering Society for Corrosion, 2005)
In this paper the structural characteristics of silver coatings electrodeposited as final coatings onto aluminum were shown. The copper coating was electrodeposited as a basic coating directly onto aluminum. Afterward, ...
The effect of deposition time on the structure of the top coating of nickel electrodeposited onto aluminum / Uticaj vremena taloženja na strukturu završne prevlake nikla na aluminijumu
(Belgrade, Serbia : Engineering Society for Corrosion, 2004)
The microstructure of the chemical coating of zinc on aluminum, as well as electrodeposited nickel coating on chemically deposited zinc were investigated with change of one parameter only-deposition time. Based on the ...
Polymer bonded magnetic composites based on Nd-Fe-B / Polimerni magnetni kompoziti na bazi Nd-Fe-B
(Belgrade, Serbia : Engineering Society for Corrosion, 2013)
Various types and contents of magnetic powder and polymer matrix induce different mechanical, magnetic, electrical and optical properties of final composite material. The strong influence of relatively small amounts of ...
Formation and growth of pits on X5CrNi18-10 austenitic stainless steel in presence of chlorides and sulphates / Formiranje i rast pitova na austenitnom nerđajućem čeliku X5CrNi18-10 u prisustvu hlorida i sulfata
(Belgrade, Serbia : Engineering Society for Corrosion, 2018)
The resistance of X5CrNi18-10 stainless steel to pitting corrosion in a solution containing chlorides and sulphates was tested using the potentiodynamic polarization method. The obtained results show that the stainless ...
The electrochemical deposition and corrosion stability of Zn-Mn alloy coatings / Elektrohemijsko taloženje i koroziona stabilnost prevlaka Zn-Mn legura
(Belgrade, Serbia : Engineering Society for Corrosion, 2010)
The influence of the type of the deposition solution on the current efficiency during electrodeposition of Zn-Mn alloys was examined. The Zn-Mn alloys were deposited on steel from chloride, sulphate and pyrophosphate plating ...
Properties of cotton yarns after oxidation of potassium permanganate in an acidic environment / Svojstva pamučne pređe posle oksidacije kalijum-permanganatom u kiseloj sredini
(Belgrade, Serbia : Engineering Society for Corrosion, 2017)
The impact of nonselective cellulose oxidation (cotton fibre) by potassium permanganate in acidic environment, with or without additional treatment by sodium metabisulfite, on change of sorption (silver ions sorption), and ...