Претраживање
Приказ резултата 21-30 од 58
A comparative thermomagnetic study of melt-spun Nd-Fe-B alloys with different Nd content
(International Institute for the Science of Sintering, Beograd, 2009)
Changes in the phase composition and magnetic properties of three types of commercial Nd-Fe-B alloys with different Nd content - low (10-12 wt%), near stoichiometric (21-25 wt%) and rich (26-29 wt%) caused by thermomagnetic ...
Methanol electrooxidation on PtRu modified zeolite X
(International Institute for the Science of Sintering, Beograd, 2013)
Zeolite NaX (faujasite type) was used as a support for platinum-ruthenium catalyst. A procedure for thermal decomposition of noble metal acetylacetonates to deposit noble metal clusters on the surface of solid support was ...
Cyclic Voltammetric Study of the Influence of Porosity on Electrochemical Response of Nickel-Alumina Modified Glassy Carbon Electrode
(International Institute for the Science of Sintering, Beograd, 2018)
Pure and nickel-modified alumina powders with different porosity were synthesized and applied on the glassy carbon electrode by means of Nafion polymer. The data obtained from the nitrogen adsorption-desorption isotherm ...
Impact of Alumina Particles on the Morphology and Mechanics of Hybrid Wood Plastic Composite Materials
(Belgrade : Association for ETRAN Society, 2019)
Hybrid composite panels of Wood-Plastic Composites (WPC) consisting of wood and
poly (methyl methacrylate) (PMMA) were reinforced with alumina particles and made by
“hot pressing” method. Alumina-based particles were ...
The Effect of Sintering Temperature on Mesoporous Structure of WO3 Doped Tio(2) Powders
(International Institute for the Science of Sintering, Beograd, 2018)
In this study, WO3 doped TiO2 powders were synthesized via sol-gel method combined with a hydrothermal process. The effect of sintering temperature on mesoporous structure and catalytic activities of these powders were ...
Magnetic properties of ND Rich Melt-Spun ND-FE-B alloy
(International Institute for the Science of Sintering, Beograd, 2005)
As a part of these experimental investigations of melt-spun Nd-Fe-B alloy with Nd rich content in relation to Nd2Fe14B prepared by rapid quenching process for optimally selected cooling rate and heat treatment, the influence ...
Kinetics of the Bray-Liebhafsky oscillatory reaction perturbed by polymer supported cobalt catalyst
(International Institute for the Science of Sintering, Beograd, 2011)
The Bray-Liebhafsky (BL) oscillatory reaction generated in the batch reactor at 62- 68 oC was perturbed by cobalt(II)-nitrate, supported on the macroreticular copolymer of poly-4-vinylpyridine with divinylbenzene (Co-PVPDVB). ...
The oscillatory Bray-Liebhafsky reaction as a matrix for analyzing enzyme and polymeric catalysts for hydrogen peroxide
(International Institute for the Science of Sintering, Beograd, 2001)
The Bray-Liebhafsky (BL) oscillatory reaction, as a reaction where hydrogen peroxide decomposes into the water and oxygen in the presence of iodate and hydrogen ions through a complex mechanism involving a number of ...
Modeling of coating optical fibers with polymer-magnetic powder composite coating
(International Institute for the Science of Sintering, Beograd, 2002)
A mathematical model of forming a composite coating on optical fiber was established. The model is based on existing mathematical models for coating optical fibers with polymer coating and experimentally defined rheological ...
The Bray-Liebhafsky oscillatory reaction: Kinetic investigations in reduction and oxidation pathways based on hydrogen peroxide concentration monitoring
(International Institute for the Science of Sintering, Beograd, 2000)
By direct monitoring of the hydrogen concentration during its catalytic decomposition into water and oxygen in the presence of potassium iodate and sulfuric acid, that is in the Bray-Liebhafsky system, the pseudo-rate ...