Претраживање
Приказ резултата 21-30 од 33
Fundamental aspects of lead electrodeposition processes: Nucleation and growth / Fundamentalni aspekti procesa elektrohemijskog taloženja olova - nukleacija i rast
(Belgrade, Serbia : Engineering Society for Corrosion, 2016)
In this comprehensive study, the processes of nucleation and growth of lead from electrolytes of various kind and compositions have been analyzed. The processes of Pb nucleation were examined by the analysis of potentiostatic ...
Electrochemical aspects of formation of dendrites / Elektrohemijski aspekti formiranja dendrita
(Belgrade, Serbia : Engineering Society for Corrosion, 2016)
The one of the main contributions of Belgrade Electrochemical School to the field of metal electrodeposition is investigation of a mechanism of formation and growth of the disperse deposits. Spongy-like, cauliflower-like, ...
Nucleation and early stages of growth of lead onto copper electrodes from dilute electrolytes
(Elsevier, 2016)
The processes of nucleation and growth of lead from the dilute electrolytes on copper substrates were investigated by chronoamperometry and by scanning electron microscopic (SEM) analysis of the deposits obtained in the ...
Formiranje Nb taloga na staklastom ugljeniku iz hloroaluminatnog rastopa / Formation of Nb deposit on vitrius carbon from chloroaluminate melts
(Serbian Society of Corrosion and Materials Protection (UISKoZaM), 2016)
Ispitivano je elektrohemijsko taloženje i rastvaranje niobijuma iz rastopa ekvimolarne smeše
aluminijum (III) hlorida i natrijum hlorida, obogaćenog niobijumom, na staklastom ugljeniku.
Elektrotaloženje je izvođeno u ...
Electrodeposition of cobalt powders with novel three-dimensional structure
(Metalurgija, 2011)
Novel three-dimensional cobalt powder structures were successfully prepared by electrodeposition. Electrodeposited cobalt powder was characterized by scanning electron microscopy (SEM) and light microscopy. It was possible ...
The electrochemical deposition and corrosion stability of Zn-Mn alloy coatings / Elektrohemijsko taloženje i koroziona stabilnost prevlaka Zn-Mn legura
(Belgrade, Serbia : Engineering Society for Corrosion, 2010)
The influence of the type of the deposition solution on the current efficiency during electrodeposition of Zn-Mn alloys was examined. The Zn-Mn alloys were deposited on steel from chloride, sulphate and pyrophosphate plating ...
Preparation and mechanical characterization of copper thin films with additives on alloy substrates
(Belgrade : Institute of Chemistry, Technology and Metallurgy, 2017)
Thin copper films have various application in the electronic industry for the fabrication of
contacts in integrated circuits. Copper electroplating has been widely employed for
fabricating the wires of printed circuit ...
Electrochemical deposition of titanium and aluminium from equimolar AlCl3+NaCl melt
(Romanian Chemical Society, 2019)
Electrodeposition of Al-Ti based materials is an attractive process offering
many advantages over more conventional processing methods. A number of articles on
aluminium-titanium intermetallics electrodeposited from ...
PdNi alloys as efficient catalysts for alcohol oxidation
(Crnogorsko društvo za koroziju, zaštitu materijala i zaštitu životne sredine, 2018)
The investigated PdNi alloys were prepared by electrochemical procedures
through simultaneous deposition of metals from the mixed solutions of their
precursors (0.01M PdCl2 + 0.6MNiCl2 + 2 MNH4Cl). Electrodeposited ...
Electrochemical formation of magnesium oxide/hydroxide structures / Elektrohemijsko formiranje različitih oblika magnezijum oksida/hidroksida
(Serbian Society of Corrosion and Materials Protection (UISKoZaM), 2017)
Nanocrystalline magnesium oxides and hydroxides are attracting comprehensive attention due to their high surface area and their specific optical, thermal, electrical and chemical characteristics. Magnesium oxides and ...