Претраживање
Приказ резултата 1-10 од 33
Removal of copper by pelletized fly ash
(Association of Metallurgical Engineers of Serbia (AMES), 2019)
Recent investigations are focused on the possibility of waste utilization as potential adsorbents in wastewater treatments. Industrial by-products and wastes are almost zero-cost raw materials and at the same time, their ...
Controllable synthesis of Fe3O4-wollastonite adsorbents for efficient heavy metal ions/oxyanions removal
(Springer, 2019)
Iron oxide, in the form of magnetite (MG)–functionalized porous wollastonite (WL), was used as an adsorbent for heavy metal ions (cadmium and nickel) and oxyanions (chromate and phosphate) removal from water. The porous ...
Alumina-Ni composites obtained by sol-gel method as adsorbents of azo dyes
(Serbian Ceramic Society, 2018)
The disposal of waters contaminated with azo dyes into natural aquatic recipients can be
regarded as very harmful. Since dyes have a high degree of chemical and photolytic stability
adsorption can be regarded as appropriate ...
Adsorption study on natural clays as cement mineral additives: possibility of toxic metallic cations immobilization
(Serbian Ceramic Society, 2018)
Evironmetally safe mortars in which part of the cement binder was replaced by mineral
additives (i.e. zeolite, bentonite and fly ash) were designed. Fly ash, as fine powdery byproduct
of coal combustion, comprises heavy ...
Differently shaped nanocrystalline (Fe, Y)3O4 and its adsorption efficiency toward inorganic arsenic species
(IOP Publishing, 2019)
Herein we report effects of partial substitution of Fe3+ by Y3+ in magnetite (Fe3O4) on morphology and inorganic arsenic species adsorption efficiency of the Fe3−x Y x O4 nanoparticles formed. The series of Fe3−x Y x O4 ...
Differently shaped nanocrystalline (Fe, Y)3O4 and its adsorption efficiency toward inorganic arsenic species
(IOP Publishing, 2019)
Herein we report effects of partial substitution of Fe3+ by Y3+ in magnetite (Fe3O4) on morphology and inorganic arsenic species adsorption efficiency of the Fe3−x Y x O4 nanoparticles formed. The series of Fe3−x Y x O4 ...
Controllable synthesis of Fe3O4-wollastonite adsorbents for efficient heavy metal ions/oxyanions removal
(Springer, 2019)
Iron oxide, in the form of magnetite (MG)–functionalized porous wollastonite (WL), was used as an adsorbent for heavy metal ions (cadmium and nickel) and oxyanions (chromate and phosphate) removal from water. The porous ...
Adsorption of azo dyes on polymer materials / Adsorpcija azo boja na polimernim materijalima
(Association of Chemical Engineers of Serbia, 2013)
The use of polymeric adsorbents for the removal of azo dyes from solution has been reviewed. Adsorption techniques are widely used to remove certain classes of pollutants from waters, especially those which are not easily ...
Nanostructured organic-inorganic hybrid smectite based composites
(Society of Physical Chemists of Serbia, 2018)
This paper represents a survey of the investigation conducted in the Center
for Catalysis and Chemical Engineering of the Institute of Chemistry,
Technology and Metallurgy, Belgrade, during last decade regarding
nanostructured ...
Kinetics of adsorption of mixed pollutants by organobentonite
(Society of Physical Chemists of Serbia, 2010)
Quantitative substitution of the interlayer cations of smectite by hexadecyl trimethylammonium ions (HDTMA) was performed in order to prepare adsorbent able to simultaneously adsorb toxic metal cations and organic pollutants. ...