Show simple item record

dc.creatorPeřinka, N.
dc.creatorDržková, M.
dc.creatorRandjelović, Danijela
dc.creatorBondavalli, P.
dc.creatorHajná, M.
dc.creatorBober, P.
dc.creatorSyrový, T.
dc.creatorBonnassieaux, Y.
dc.creatorStejskal, J.
dc.date.accessioned2019-01-30T17:48:04Z
dc.date.available2019-01-30T17:48:04Z
dc.date.issued2015
dc.identifier.issn1013-9826
dc.identifier.urihttps://cer.ihtm.bg.ac.rs/handle/123456789/1840
dc.description.abstractWe report on the preparation of thin conducting films from the poly(N-vinylpyrrolidone) stabilized polyaniline dispersions for the ammonia gas sensor applications. The dispersion is waterbased and prepared by means of relatively simple chemical oxidation polymerization of aniline. Two processes were used for the ink deposition, the ink-jet printing and the spray-coating technique. With the former one, the ink was at first tested on the poly(ethylene terephthalate) foil to find a suitable combination of ink formulation and print parameters. After that, the final ammonia gas sensors were fabricated by both deposition techniques and compared. The aspects of the ink preparation and alteration, as well as the active layer properties, are analyzed by means of UV-vis spectroscopy, optical microscopy, atomic force microscopy, profilometry and electrical measurements. The results obtained from each deposition technique are discussed. In both cases, the sensitivity to the ammonia gas has been demonstrated, making the proposed ink in combination with the two named deposition processes feasible for the potential large-area sensor production.en
dc.publisherTrans Tech Publications Ltd
dc.relationinfo:eu-repo/grantAgreement/MESTD/Technological Development (TD or TR)/32008/RS//
dc.rightsrestrictedAccess
dc.sourceKey Engineering Materials
dc.subjectAtomic force microscopyen
dc.subjectInk-jet printingen
dc.subjectPoly(N-vinylpyrrolidone)en
dc.subjectPolyanilineen
dc.subjectSensoren
dc.subjectSpray coatingen
dc.titleApplication of ink-jet printing and spray coating for the fabrication of polyaniline/poly(N-vinylpyrrolidone)-based ammonia gas sensoren
dc.typeconferenceObject
dc.rights.licenseARR
dcterms.abstractСyровý, Т.; Ранђеловић, Данијела; Стејскал, Ј.; Боннассиеауx, Y.; Пеřинка, Н.; Држковá, М.; Бондавалли, П.; Хајнá, М.; Бобер, П.;
dc.citation.volume644
dc.citation.spage61
dc.citation.epage64
dc.citation.other644: 61-64
dc.identifier.doi10.4028/www.scientific.net/KEM.644.61
dc.identifier.scopus2-s2.0-84930159064
dc.type.versionpublishedVersion


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record