This study is focused on the surface modifications of the materials that are used for antimicrobial water treatment. Sorbents of different origin were activated by Ag+-ions. The selection of the most appropriate materials and the most effective activation agents was done according to the results of the sorption and desorption kinetic studies. Sorption capacities of selected sorbents: granulated activated carbon (GAC), zeolite (Z), and titanium dioxide (T), activated by Ag+-ions were following: 42.06, 13.51 and 17.53 mg/g, respectively. The antimicrobial activity of Ag/Z, Ag/GAC and Ag/T sorbents were tested against Gram-negative bacteria E. coli, Gram-positive bacteria S. aureus and yeast C. albicans. After 15 min of exposure period, the highest cell removal was obtained using Ag/Z against S. aureus and E. coli, 98.8 and 93.5%, respectively. Yeast cell inactivation was unsatisfactory for all three activated sorbents. The antimicrobial pathway of the activated sorbents has been examined... by two separate tests - Ag+-ions desorbed from the activated surface to the aqueous phase and microbial cell removal caused by the Ag+-ions from the solid phase (activated surface sites). The results indicated that disinfection process significantly depended on the microbial-activated sites interactions on the modified surface. The chemical state of the activating agent had crucial impact to the inhibition rate. The characterization of the native and modified sorbents was performed by X-ray diffraction technique, X-ray photoelectron spectroscopy and scanning electron microscope. The concentration of adsorbed and released ions was determined by inductively coupled plasma optical emission spectroscopy and mass spectrometry. The antimicrobial efficiency of activated sorbents was related not only to the concentration of the activating agent, but moreover on the surface characteristics of the material, which affects the distribution and the accessibility of the activating agent.
Keywords:
Silver / Activated sorbents / Antimicrobial activity / E. coli / S. aureus / C. albicans
TY - JOUR
AU - Dolic, Maja B
AU - Rajakovic-Ognjanovic, Vladana N
AU - Štrbac, Svetlana
AU - Rakočević, Zlatko Lj.
AU - Veljović, Đorđe
AU - Dimitrijević, Suzana I.
AU - Rajaković, Ljubinka V.
PY - 2015
UR - https://cer.ihtm.bg.ac.rs/handle/123456789/1791
AB - This study is focused on the surface modifications of the materials that are used for antimicrobial water treatment. Sorbents of different origin were activated by Ag+-ions. The selection of the most appropriate materials and the most effective activation agents was done according to the results of the sorption and desorption kinetic studies. Sorption capacities of selected sorbents: granulated activated carbon (GAC), zeolite (Z), and titanium dioxide (T), activated by Ag+-ions were following: 42.06, 13.51 and 17.53 mg/g, respectively. The antimicrobial activity of Ag/Z, Ag/GAC and Ag/T sorbents were tested against Gram-negative bacteria E. coli, Gram-positive bacteria S. aureus and yeast C. albicans. After 15 min of exposure period, the highest cell removal was obtained using Ag/Z against S. aureus and E. coli, 98.8 and 93.5%, respectively. Yeast cell inactivation was unsatisfactory for all three activated sorbents. The antimicrobial pathway of the activated sorbents has been examined by two separate tests - Ag+-ions desorbed from the activated surface to the aqueous phase and microbial cell removal caused by the Ag+-ions from the solid phase (activated surface sites). The results indicated that disinfection process significantly depended on the microbial-activated sites interactions on the modified surface. The chemical state of the activating agent had crucial impact to the inhibition rate. The characterization of the native and modified sorbents was performed by X-ray diffraction technique, X-ray photoelectron spectroscopy and scanning electron microscope. The concentration of adsorbed and released ions was determined by inductively coupled plasma optical emission spectroscopy and mass spectrometry. The antimicrobial efficiency of activated sorbents was related not only to the concentration of the activating agent, but moreover on the surface characteristics of the material, which affects the distribution and the accessibility of the activating agent.
PB - Elsevier
T2 - Applied Surface Science
T1 - The antimicrobial efficiency of silver activated sorbents
VL - 357
SP - 819
EP - 831
DO - 10.1016/j.apsusc.2015.09.032
ER -
@article{
author = "Dolic, Maja B and Rajakovic-Ognjanovic, Vladana N and Štrbac, Svetlana and Rakočević, Zlatko Lj. and Veljović, Đorđe and Dimitrijević, Suzana I. and Rajaković, Ljubinka V.",
year = "2015",
abstract = "This study is focused on the surface modifications of the materials that are used for antimicrobial water treatment. Sorbents of different origin were activated by Ag+-ions. The selection of the most appropriate materials and the most effective activation agents was done according to the results of the sorption and desorption kinetic studies. Sorption capacities of selected sorbents: granulated activated carbon (GAC), zeolite (Z), and titanium dioxide (T), activated by Ag+-ions were following: 42.06, 13.51 and 17.53 mg/g, respectively. The antimicrobial activity of Ag/Z, Ag/GAC and Ag/T sorbents were tested against Gram-negative bacteria E. coli, Gram-positive bacteria S. aureus and yeast C. albicans. After 15 min of exposure period, the highest cell removal was obtained using Ag/Z against S. aureus and E. coli, 98.8 and 93.5%, respectively. Yeast cell inactivation was unsatisfactory for all three activated sorbents. The antimicrobial pathway of the activated sorbents has been examined by two separate tests - Ag+-ions desorbed from the activated surface to the aqueous phase and microbial cell removal caused by the Ag+-ions from the solid phase (activated surface sites). The results indicated that disinfection process significantly depended on the microbial-activated sites interactions on the modified surface. The chemical state of the activating agent had crucial impact to the inhibition rate. The characterization of the native and modified sorbents was performed by X-ray diffraction technique, X-ray photoelectron spectroscopy and scanning electron microscope. The concentration of adsorbed and released ions was determined by inductively coupled plasma optical emission spectroscopy and mass spectrometry. The antimicrobial efficiency of activated sorbents was related not only to the concentration of the activating agent, but moreover on the surface characteristics of the material, which affects the distribution and the accessibility of the activating agent.",
publisher = "Elsevier",
journal = "Applied Surface Science",
title = "The antimicrobial efficiency of silver activated sorbents",
volume = "357",
pages = "819-831",
doi = "10.1016/j.apsusc.2015.09.032"
}
Dolic, M. B., Rajakovic-Ognjanovic, V. N., Štrbac, S., Rakočević, Z. Lj., Veljović, Đ., Dimitrijević, S. I.,& Rajaković, L. V.. (2015). The antimicrobial efficiency of silver activated sorbents. in Applied Surface Science
Elsevier., 357, 819-831.
https://doi.org/10.1016/j.apsusc.2015.09.032
Dolic MB, Rajakovic-Ognjanovic VN, Štrbac S, Rakočević ZL, Veljović Đ, Dimitrijević SI, Rajaković LV. The antimicrobial efficiency of silver activated sorbents. in Applied Surface Science. 2015;357:819-831.
doi:10.1016/j.apsusc.2015.09.032 .
Dolic, Maja B, Rajakovic-Ognjanovic, Vladana N, Štrbac, Svetlana, Rakočević, Zlatko Lj., Veljović, Đorđe, Dimitrijević, Suzana I., Rajaković, Ljubinka V., "The antimicrobial efficiency of silver activated sorbents" in Applied Surface Science, 357 (2015):819-831,
https://doi.org/10.1016/j.apsusc.2015.09.032 . .
