ЦЕР - Централни Репозиторијум ИХТМ-а
Институт за хемију, технологију и металургију
    • English
    • Српски
    • Српски (Serbia)
  • Српски (ћирилица) 
    • Енглески
    • Српски (ћирилица)
    • Српски (латиница)
  • Пријава
Преглед рада 
  •   ЦЕР - Централни репозиторијум ИХТМ-а
  • IHTM
  • Radovi istraživača / Researchers' publications
  • Преглед рада
  •   ЦЕР - Централни репозиторијум ИХТМ-а
  • IHTM
  • Radovi istraživača / Researchers' publications
  • Преглед рада
JavaScript is disabled for your browser. Some features of this site may not work without it.

Effect of surface modified TiO2 nanoparticles on thermal, barrier and mechanical properties of long oil alkyd resin-based coatings

Thumbnail
2015
1699.pdf (1.688Mb)
Аутори
Radoman, T S
Džunuzović, Jasna
Trifkovic, K T
Palija, T
Marinković, Aleksandar D.
Bugarski, Branko
Dzunuzovic, E S
Чланак у часопису (Објављена верзија)
Метаподаци
Приказ свих података о документу
Апстракт
Novel soy alkyd-based nanocomposites (NCs) were prepared using TiO2 nanoparticles (NPs) surface modified with different gallates, and for the first time with imine obtained from 3,4-dihydroxybenzaldehyde and oleylamine (DHBAOA). Unmodified and surface modified anatase TiO2 NPs were characterized by transmission electron microscopy (TEM), X-ray diffraction (XRD), Fourier transform infrared spectroscopy (FTIR) and ultraviolet-visible (UV-Vis) spectroscopy, while the amount of adsorbed ligands was calculated from thermogravimetric analysis (TGA) results. Surface modification of TiO2 NPs was confirmed by FTIR and UV-Vis spectra. The influence of the TiO2 surface modification on the dispersion of TiO2 NPs in alkyd resin, thermal, barrier and mechanical properties and chemical resistance of alkyd resin/TiO2 NC coatings was investigated. The obtained results revealed that glass transition temperature of all investigated NCs is lower than for pure resin, that the presence of TiO2 NPs surface m...odified with gallates had no significant influence on the thermooxidative stability of alkyd resin, while TiO2-DHBAOA NPs slightly improved alkyd resin thermooxidative stability. Also, the presence of surface modified TiO2 NPs improved barrier properties, increased stress and strain at break and hardness and chemical resistance and decreased modulus of elasticity and abrasion resistance of alkyd resin.

Кључне речи:
thermal properties / alkyd-based coatings / TiO2 nanoparticles / surface modification / mechanical properties
Извор:
Express Polymer Letters, 2015, 9, 10, 916-931
Издавач:
  • Budapest University of Technology
Пројекти:
  • Синтеза и карактеризација нових функционалних полимера и полимерних нанокомпозита (RS-172062)

DOI: 10.3144/expresspolymlett.2015.83

ISSN: 1788-618X

WoS: 000359322400006

Scopus: 2-s2.0-84938528265
[ Google Scholar ]
13
9
URI
http://cer.ihtm.bg.ac.rs/handle/123456789/1701
Колекције
  • Radovi istraživača / Researchers' publications
Институција
IHTM

DSpace software copyright © 2002-2015  DuraSpace
О Централном репозиторијуму (ЦеР) | Пошаљите запажања

OpenAIRERCUB
 

 

Комплетан репозиторијумИнституцијеАуториНасловиТемеОва институцијаАуториНасловиТеме

Статистика

Преглед статистика

DSpace software copyright © 2002-2015  DuraSpace
О Централном репозиторијуму (ЦеР) | Пошаљите запажања

OpenAIRERCUB