Influence of sintering temperature on low level laser (LLL) destruction of low cement high alumina refractory concrete
Само за регистроване кориснике
2015
Чланак у часопису (Објављена верзија)
Метаподаци
Приказ свих података о документуАпстракт
Low level laser (LLL) was applied to induct destruction of the low cement high alumina refractory concrete (LCC) samples. Three different series of samples were used in the experiment: a reference one dried at 105 degrees C, sintered at 1300 degrees C and sintered at 1600 degrees C. Level of destruction during time interval from 5 to 25 min was monitored by measuring surface and depth of damage. Obtained results shown that minimal level of destruction was observed for the samples sinteted at 1600 degrees C for the whole time interval.
Кључне речи:
Low level laser (LLL) / Laser destruction / Mechanical comparator / Image analysis / Damages size / Refractory concreteИзвор:
Engineering Structures, 2015, 99, 462-467Издавач:
- Elsevier
Финансирање / пројекти:
- Имплементација савременијих техничко-технолошких и еколошких решења у постојећим производним системима Рудника Бакра Бор и Рудника Бакра Мајданпек (RS-MESTD-Technological Development (TD or TR)-33007)
DOI: 10.1016/j.engstruct.2015.05.020
ISSN: 0141-0296
WoS: 000359171900037
Scopus: 2-s2.0-84930209265
Институција/група
IHTMTY - JOUR AU - Martinović, Sanja AU - Vlahović, Milica AU - Stević, Zoran AU - Volkov-Husović, Tatjana PY - 2015 UR - https://cer.ihtm.bg.ac.rs/handle/123456789/1698 AB - Low level laser (LLL) was applied to induct destruction of the low cement high alumina refractory concrete (LCC) samples. Three different series of samples were used in the experiment: a reference one dried at 105 degrees C, sintered at 1300 degrees C and sintered at 1600 degrees C. Level of destruction during time interval from 5 to 25 min was monitored by measuring surface and depth of damage. Obtained results shown that minimal level of destruction was observed for the samples sinteted at 1600 degrees C for the whole time interval. PB - Elsevier T2 - Engineering Structures T1 - Influence of sintering temperature on low level laser (LLL) destruction of low cement high alumina refractory concrete VL - 99 SP - 462 EP - 467 DO - 10.1016/j.engstruct.2015.05.020 ER -
@article{ author = "Martinović, Sanja and Vlahović, Milica and Stević, Zoran and Volkov-Husović, Tatjana", year = "2015", abstract = "Low level laser (LLL) was applied to induct destruction of the low cement high alumina refractory concrete (LCC) samples. Three different series of samples were used in the experiment: a reference one dried at 105 degrees C, sintered at 1300 degrees C and sintered at 1600 degrees C. Level of destruction during time interval from 5 to 25 min was monitored by measuring surface and depth of damage. Obtained results shown that minimal level of destruction was observed for the samples sinteted at 1600 degrees C for the whole time interval.", publisher = "Elsevier", journal = "Engineering Structures", title = "Influence of sintering temperature on low level laser (LLL) destruction of low cement high alumina refractory concrete", volume = "99", pages = "462-467", doi = "10.1016/j.engstruct.2015.05.020" }
Martinović, S., Vlahović, M., Stević, Z.,& Volkov-Husović, T.. (2015). Influence of sintering temperature on low level laser (LLL) destruction of low cement high alumina refractory concrete. in Engineering Structures Elsevier., 99, 462-467. https://doi.org/10.1016/j.engstruct.2015.05.020
Martinović S, Vlahović M, Stević Z, Volkov-Husović T. Influence of sintering temperature on low level laser (LLL) destruction of low cement high alumina refractory concrete. in Engineering Structures. 2015;99:462-467. doi:10.1016/j.engstruct.2015.05.020 .
Martinović, Sanja, Vlahović, Milica, Stević, Zoran, Volkov-Husović, Tatjana, "Influence of sintering temperature on low level laser (LLL) destruction of low cement high alumina refractory concrete" in Engineering Structures, 99 (2015):462-467, https://doi.org/10.1016/j.engstruct.2015.05.020 . .