Приказ основних података о документу

Ponašanje kompozitnih sistema tipa 'mek film na tvrdom supstratu' na testu utiskivanja

dc.creatorLamovec, Jelena
dc.creatorJović, Vesna
dc.creatorMladenović, Ivana
dc.creatorStojanović, Dušica
dc.creatorKojović, Aleksandar
dc.creatorRadojević, Vesna
dc.date.accessioned2019-01-30T17:44:52Z
dc.date.available2019-01-30T17:44:52Z
dc.date.issued2015
dc.identifier.issn0351-9465
dc.identifier.urihttps://cer.ihtm.bg.ac.rs/handle/123456789/1689
dc.description.abstractThis investigation has been carried out in order to analyse and compare the hardness response of different composite systems of the same type, named 'soft film on hard substrate' composite system. Composite systems of mono- and multilayered electrodeposited Ni and Cu thin films on (100) and (111)-oriented monocrystalline Si wafers and 100 µm-thick electrodeposited Ni film as the substrates were fabricated. The indentation behaviour of these composite structures was characterized using Berkovich nanohardness and Vickers microhardness testing. The measured hardness is so-called 'composite hardness', because the substrate participates in the plastic deformation during the indentation process. The contribution of the substrate to the measured hardness starts at indentation depths of the order of 0.07- 0.2 times the film thickness. Dependence of nanohardness and microhardness values on electrodeposition process conditions, substrate and film microstructure, total film thickness, layer thickness and Ni/Cu layer thickness ratio for different composite systems ratio was investigated. Composite hardness model of Chicot-Lesage (C-L) was chosen and applied to experimental data in order to determine absolute film hardness.en
dc.description.abstractOvo istraživanje je izvršeno u cilju analize i upoređivanja odziva različitih kompozitnih sistema koji pripadaju istom tipu sistema nazvanom 'mek film na tvrdom supstratu', pri merenju tvrdoće. Formirani su kompozitni sistemi elektrodepozicijom jedno- i višeslojnih Ni i Cu tankih filmova na (100) i (111)- orijentisanim monokristalnim Si pločicama i 100-µm debelom elektrodeponovanom Ni filmu kao supstratima. Ponašanje ovih kompozitnih struktura pri utiskivanju je okarakterisano merenjem nanotvrdoće po Berkoviču i mikrotvrdoće po Vikersu. Izmerena vrednost mikrotvrdoće se naziva 'kompozitnom tvrdoćom' jer prilikom testiranja utiskivanjem dolazi i do plastične deformacije supstrata. Doprinos deformacije supstrata izmerenoj tvrdoći počinje na dubinama utiskivanja koje su reda 0.07-0.2 puta manje od debljine filma. Istraživana je zavisnost vrednosti nanotvrdoće i mikrotvrdoće od procesnih parametera elektrodepozicije, mikrostrukture supstrata i filmova, ukupne debljine filma, debljine pojedinačnog sloja u filmu i odnosa debljina Ni/Cu pojedinačnih slojeva u filmu za različite kompozitne sisteme. Radi određivanja apsolutne tvrdoće filma u sistemu, odabran je i na eksperimentalne rezultate primenjen model kompozitne tvrdoće Šiko-Lezaž (C-L).sr
dc.publisherBelgrade, Serbia : Engineering Society for Corrosion
dc.relationinfo:eu-repo/grantAgreement/MESTD/Technological Development (TD or TR)/32008/RS//
dc.rightsopenAccess
dc.rights.urihttps://creativecommons.org/licenses/by-nc-nd/4.0/
dc.sourceZaštita materijala
dc.subjectcomposite hardnessen
dc.subjectnanohardnessen
dc.subjectvickers microhardnessen
dc.subjecthardness modelen
dc.subjectNi/Cu electrodepositionen
dc.subjectNi/Cu multilayersen
dc.subjectkompozitna tvrdoćasr
dc.subjectnanotvrdoćasr
dc.subjectvikersova mikrotvrdoćasr
dc.subjectmodel tvrdoćesr
dc.subjectNi/Cu elektrodepozicijasr
dc.subjectNi/Cu višeslojni filmovisr
dc.titleIndentation behaviour of 'soft film on hard substrate' composite system typeen
dc.titlePonašanje kompozitnih sistema tipa 'mek film na tvrdom supstratu' na testu utiskivanjasr
dc.typearticle
dc.rights.licenseBY-NC-ND
dcterms.abstractРадојевић, Весна; Којовић, Aлександар; Ламовец, Јелена; Јовић, Весна; Младеновић, Ивана; Стојановић, Душица; Понашање композитних система типа 'мек филм на тврдом супстрату' на тесту утискивања; Понашање композитних система типа 'мек филм на тврдом супстрату' на тесту утискивања;
dc.citation.volume56
dc.citation.issue3
dc.citation.spage269
dc.citation.epage277
dc.citation.other56(3): 269-277
dc.citation.rankM24
dc.identifier.doi10.5937/ZasMat1503269L
dc.identifier.fulltexthttps://cer.ihtm.bg.ac.rs//bitstream/id/8137/1687.pdf
dc.type.versionpublishedVersion


Документи

Thumbnail

Овај документ се појављује у следећим колекцијама

Приказ основних података о документу