Characterization of polyaniline-based ammonia gas sensors prepared by means of spray coating and ink-jet printing
Authorized Users Only
2014
Authors
Peřinka, N.Držková, M.
Randjelović, Danijela
Bondavalli, P.
Hajná, M.
Bober, P.
Syrový, T.
Bonnassieaux, Y.
Stejskal, J.
Article (Published version)
Metadata
Show full item recordAbstract
This work deals with the process of ammonia gas sensor fabrication and its detailed characterization. The sensor active layer was deposited from a polyaniline dispersion. The prepared polyaniline dispersion is based on poly(N-vinylpyrrolidone), acting as a dispersion stabilizer. The dispersion synthesis was tuned towards the printing and coating process. The prepared ink was water-based. The sensor active layer was deposited by means of two different techniques; the ink-jet printing and spray coating. The ink was first optimized using the poly(ethylene terephthalate) foil as the substrate material. The optimal printing parameters and ink properties for the used deposition processes were found. The polyaniline films as well as the performance of fabricated sensors, prepared by means of the both techniques were compared. The polyaniline films were characterized by means of UV-vis spectroscopy, optical microscopy, atomic force microscopy, profilometry and electrical measurements. The diff...erences in the film morphology and aspects of the each of the two used deposition techniques are analyzed and discussed in detail. The sensors obtained from the both techniques showed response to ammonia gas, as well as its concentration. The synthesized ink in combination with the suggested deposition processes could be therefore potentially used for the future manufacturing of the large area ammonia gas sensors. Copyright
Keywords:
Atomic force microscopy / Dispersion / Ink-Jet printing / Poly(N-vinylpyrrolidone) / Polyaniline / Sensor / Spray coatingSource:
Sensor Letters, 2014, 12, 11, 1620-1627Publisher:
- American Scientific Publishers
Collections
Institution/Community
IHTMTY - JOUR AU - Peřinka, N. AU - Držková, M. AU - Randjelović, Danijela AU - Bondavalli, P. AU - Hajná, M. AU - Bober, P. AU - Syrový, T. AU - Bonnassieaux, Y. AU - Stejskal, J. PY - 2014 UR - https://cer.ihtm.bg.ac.rs/handle/123456789/1600 AB - This work deals with the process of ammonia gas sensor fabrication and its detailed characterization. The sensor active layer was deposited from a polyaniline dispersion. The prepared polyaniline dispersion is based on poly(N-vinylpyrrolidone), acting as a dispersion stabilizer. The dispersion synthesis was tuned towards the printing and coating process. The prepared ink was water-based. The sensor active layer was deposited by means of two different techniques; the ink-jet printing and spray coating. The ink was first optimized using the poly(ethylene terephthalate) foil as the substrate material. The optimal printing parameters and ink properties for the used deposition processes were found. The polyaniline films as well as the performance of fabricated sensors, prepared by means of the both techniques were compared. The polyaniline films were characterized by means of UV-vis spectroscopy, optical microscopy, atomic force microscopy, profilometry and electrical measurements. The differences in the film morphology and aspects of the each of the two used deposition techniques are analyzed and discussed in detail. The sensors obtained from the both techniques showed response to ammonia gas, as well as its concentration. The synthesized ink in combination with the suggested deposition processes could be therefore potentially used for the future manufacturing of the large area ammonia gas sensors. Copyright PB - American Scientific Publishers T2 - Sensor Letters T1 - Characterization of polyaniline-based ammonia gas sensors prepared by means of spray coating and ink-jet printing VL - 12 IS - 11 SP - 1620 EP - 1627 DO - 10.1166/sl.2014.3362 ER -
@article{ author = "Peřinka, N. and Držková, M. and Randjelović, Danijela and Bondavalli, P. and Hajná, M. and Bober, P. and Syrový, T. and Bonnassieaux, Y. and Stejskal, J.", year = "2014", abstract = "This work deals with the process of ammonia gas sensor fabrication and its detailed characterization. The sensor active layer was deposited from a polyaniline dispersion. The prepared polyaniline dispersion is based on poly(N-vinylpyrrolidone), acting as a dispersion stabilizer. The dispersion synthesis was tuned towards the printing and coating process. The prepared ink was water-based. The sensor active layer was deposited by means of two different techniques; the ink-jet printing and spray coating. The ink was first optimized using the poly(ethylene terephthalate) foil as the substrate material. The optimal printing parameters and ink properties for the used deposition processes were found. The polyaniline films as well as the performance of fabricated sensors, prepared by means of the both techniques were compared. The polyaniline films were characterized by means of UV-vis spectroscopy, optical microscopy, atomic force microscopy, profilometry and electrical measurements. The differences in the film morphology and aspects of the each of the two used deposition techniques are analyzed and discussed in detail. The sensors obtained from the both techniques showed response to ammonia gas, as well as its concentration. The synthesized ink in combination with the suggested deposition processes could be therefore potentially used for the future manufacturing of the large area ammonia gas sensors. Copyright", publisher = "American Scientific Publishers", journal = "Sensor Letters", title = "Characterization of polyaniline-based ammonia gas sensors prepared by means of spray coating and ink-jet printing", volume = "12", number = "11", pages = "1620-1627", doi = "10.1166/sl.2014.3362" }
Peřinka, N., Držková, M., Randjelović, D., Bondavalli, P., Hajná, M., Bober, P., Syrový, T., Bonnassieaux, Y.,& Stejskal, J.. (2014). Characterization of polyaniline-based ammonia gas sensors prepared by means of spray coating and ink-jet printing. in Sensor Letters American Scientific Publishers., 12(11), 1620-1627. https://doi.org/10.1166/sl.2014.3362
Peřinka N, Držková M, Randjelović D, Bondavalli P, Hajná M, Bober P, Syrový T, Bonnassieaux Y, Stejskal J. Characterization of polyaniline-based ammonia gas sensors prepared by means of spray coating and ink-jet printing. in Sensor Letters. 2014;12(11):1620-1627. doi:10.1166/sl.2014.3362 .
Peřinka, N., Držková, M., Randjelović, Danijela, Bondavalli, P., Hajná, M., Bober, P., Syrový, T., Bonnassieaux, Y., Stejskal, J., "Characterization of polyaniline-based ammonia gas sensors prepared by means of spray coating and ink-jet printing" in Sensor Letters, 12, no. 11 (2014):1620-1627, https://doi.org/10.1166/sl.2014.3362 . .