CER - Centralni Repozitorijum IHTM-a
Institut za hemiju, tehnologiju i metalurgiju
    • English
    • Српски
    • Српски (Serbia)
  • Srpski (latinica) 
    • Engleski
    • Srpski (ćirilica)
    • Srpski (latinica)
  • Prijava
Pregled rada 
  •   CER - Repozitorijum Instituta za hemiju, tehnologiju i metalurgiju
  • IHTM
  • Radovi istraživača / Researchers' publications
  • Pregled rada
  •   CER - Repozitorijum Instituta za hemiju, tehnologiju i metalurgiju
  • IHTM
  • Radovi istraživača / Researchers' publications
  • Pregled rada
JavaScript is disabled for your browser. Some features of this site may not work without it.

Cylindrical-parabolic reflector with printed antenna structures

Thumbnail
2013
MIDEM_43(2013)2p97.pdf (1.187Mb)
Autori
Nešić, Aleksandar
Radnovic, Ivana
Milijic, Marija
Micic, Zoran
Nešić, Dušan
Članak u časopisu (Objavljena verzija)
Metapodaci
Prikaz svih podataka o dokumentu
Apstrakt
The paper presents concept of design and realization of the new class of printed antenna structures which consist of a linear axial array of dipoles, subreflector, feed network and a bal-un, all printed on a common dielectric substrate. The array is positioned on the axis focus of the cylindrical-parabolic reflector. Use of the reflector enables reducing back side radiation and shaping beamwidth in H-plane thus obtaining higher gain while the printed subreflector gives the possibility of achieving additional gain. Besides, by using dipoles with pentagonal shape that operate on the second resonance, enhanced bandwidth of the array has been accomplished. Four variants of such arrays have been realized: two of them with 8 radiating elements for the frequency range around 26 GHz - one with uniform and the other with tapered feed distribution, featuring gains of 27.5 dBi and 25.7 dBi, respectively. The latter has the side lobe suppression of 28 dB in E-plane. Two other arrays that are inten...ded for ranges around 23 GHz and 60 GHz have 16 radiating elements, uniform feed distribution and measured gains of 33 dBi and 34 dBi, respectively. Bandwidths of all realized model for S11 less than -10 dB is around 30 %. In all cases agreement between simulated and measured results is very good.

Ključne reči:
Microwaves and millimeter waves / Antenna array / Printed antenna / Cylindrical-parabolic reflector
Izvor:
Informacije Midem-Journal of Microelectronics Electronic Components and Materials, 2013, 43, 2, 97-102
Izdavač:
  • Soc Microelectronics, Electron Components Materials-Midem, Ljubljjana
Projekti:
  • Rekonfigurabilne, multiband i skenirane antene na bazi metamaterijala za bežične komunikacione sisteme i senzore (RS-32024)

ISSN: 0352-9045

WoS: 000320715700003

Scopus: 2-s2.0-84879480109
[ Google Scholar ]
1
URI
http://cer.ihtm.bg.ac.rs/handle/123456789/1340
Kolekcije
  • Radovi istraživača / Researchers' publications
Institucija
IHTM
TY  - JOUR
AU  - Nešić, Aleksandar
AU  - Radnovic, Ivana
AU  - Milijic, Marija
AU  - Micic, Zoran
AU  - Nešić, Dušan
PY  - 2013
UR  - http://cer.ihtm.bg.ac.rs/handle/123456789/1340
AB  - The paper presents concept of design and realization of the new class of printed antenna structures which consist of a linear axial array of dipoles, subreflector, feed network and a bal-un, all printed on a common dielectric substrate. The array is positioned on the axis focus of the cylindrical-parabolic reflector. Use of the reflector enables reducing back side radiation and shaping beamwidth in H-plane thus obtaining higher gain while the printed subreflector gives the possibility of achieving additional gain. Besides, by using dipoles with pentagonal shape that operate on the second resonance, enhanced bandwidth of the array has been accomplished. Four variants of such arrays have been realized: two of them with 8 radiating elements for the frequency range around 26 GHz - one with uniform and the other with tapered feed distribution, featuring gains of 27.5 dBi and 25.7 dBi, respectively. The latter has the side lobe suppression of 28 dB in E-plane. Two other arrays that are intended for ranges around 23 GHz and 60 GHz have 16 radiating elements, uniform feed distribution and measured gains of 33 dBi and 34 dBi, respectively. Bandwidths of all realized model for S11 less than -10 dB is around 30 %. In all cases agreement between simulated and measured results is very good.
PB  - Soc Microelectronics, Electron Components Materials-Midem, Ljubljjana
T2  - Informacije Midem-Journal of Microelectronics Electronic Components and Materials
T1  - Cylindrical-parabolic reflector with printed antenna structures
VL  - 43
IS  - 2
SP  - 97
EP  - 102
ER  - 
@article{
author = "Nešić, Aleksandar and Radnovic, Ivana and Milijic, Marija and Micic, Zoran and Nešić, Dušan",
year = "2013",
url = "http://cer.ihtm.bg.ac.rs/handle/123456789/1340",
abstract = "The paper presents concept of design and realization of the new class of printed antenna structures which consist of a linear axial array of dipoles, subreflector, feed network and a bal-un, all printed on a common dielectric substrate. The array is positioned on the axis focus of the cylindrical-parabolic reflector. Use of the reflector enables reducing back side radiation and shaping beamwidth in H-plane thus obtaining higher gain while the printed subreflector gives the possibility of achieving additional gain. Besides, by using dipoles with pentagonal shape that operate on the second resonance, enhanced bandwidth of the array has been accomplished. Four variants of such arrays have been realized: two of them with 8 radiating elements for the frequency range around 26 GHz - one with uniform and the other with tapered feed distribution, featuring gains of 27.5 dBi and 25.7 dBi, respectively. The latter has the side lobe suppression of 28 dB in E-plane. Two other arrays that are intended for ranges around 23 GHz and 60 GHz have 16 radiating elements, uniform feed distribution and measured gains of 33 dBi and 34 dBi, respectively. Bandwidths of all realized model for S11 less than -10 dB is around 30 %. In all cases agreement between simulated and measured results is very good.",
publisher = "Soc Microelectronics, Electron Components Materials-Midem, Ljubljjana",
journal = "Informacije Midem-Journal of Microelectronics Electronic Components and Materials",
title = "Cylindrical-parabolic reflector with printed antenna structures",
volume = "43",
number = "2",
pages = "97-102"
}
Nešić A, Radnovic I, Milijic M, Micic Z, Nešić D. Cylindrical-parabolic reflector with printed antenna structures. Informacije Midem-Journal of Microelectronics Electronic Components and Materials. 2013;43(2):97-102
Nešić, A., Radnovic, I., Milijic, M., Micic, Z.,& Nešić, D. (2013). Cylindrical-parabolic reflector with printed antenna structures.
Informacije Midem-Journal of Microelectronics Electronic Components and MaterialsSoc Microelectronics, Electron Components Materials-Midem, Ljubljjana., 43(2), 97-102.
Nešić Aleksandar, Radnovic Ivana, Milijic Marija, Micic Zoran, Nešić Dušan, "Cylindrical-parabolic reflector with printed antenna structures" 43, no. 2 (2013):97-102

DSpace software copyright © 2002-2015  DuraSpace
O Centralnom repozitorijumu (CeR) | Pošaljite zapažanja

OpenAIRERCUB
 

 

Kompletan repozitorijumInstitucijeAutoriNasloviTemeOva institucijaAutoriNasloviTeme

Statistika

Pregled statistika

DSpace software copyright © 2002-2015  DuraSpace
O Centralnom repozitorijumu (CeR) | Pošaljite zapažanja

OpenAIRERCUB