Приказ основних података о документу

dc.creatorTokalic, R.
dc.creatorMarinkovic, S.
dc.creatorTrifunovic, P.
dc.creatorDević, Gordana
dc.creatorZildzovic, S.
dc.date.accessioned2019-01-30T17:36:50Z
dc.date.available2019-01-30T17:36:50Z
dc.date.issued2013
dc.identifier.issn2090-9063
dc.identifier.urihttps://cer.ihtm.bg.ac.rs/handle/123456789/1303
dc.description.abstractThe paper describes an investigation into the use of three power plant wastes: fly ash, flue gas desulphurization gypsum, and bottom ash for subbase layers in road construction. Two kinds of mixtures of these wastes with Portland cement and water were made: first with fly ash consisting of coarser particles ( LT 1.651 mm) and second with fly ash consisting of smaller particles ( LT 0.42 mm). The mass ratio of fly ash-Portland cement-flue gas desulphurization gypsum-bottom ash was the same (3:1:1:5) in both mixtures. For both mixtures, the compressive strength, the mineralogical composition, and the leaching characteristics were determined at different times, 7 and 28 days, after preparation. The obtained results showed that both mixtures could find a potential use for subbase layers in road construction.en
dc.publisherHindawi Limited
dc.rightsopenAccess
dc.rights.urihttps://creativecommons.org/licenses/by/4.0/
dc.sourceJournal of Chemistry
dc.titlePreliminary Examination of the System Fly Ash-Bottom Ash-Flue Gas Desulphurization Gypsum-Portland Cement-Water for Road Constructionen
dc.typearticle
dc.rights.licenseBY
dcterms.abstractЗилдзовиц, С.; Девић, Гордана; Токалиц, Р.; Маринковиц, С.; Трифуновиц, П.;
dc.citation.other
dc.citation.rankM23
dc.identifier.doi10.1155/2013/421480
dc.identifier.fulltexthttps://cer.ihtm.bg.ac.rs//bitstream/id/13574/1301.pdf
dc.identifier.scopus2-s2.0-84871395935
dc.identifier.wos000311725800001
dc.type.versionpublishedVersion


Документи

Thumbnail

Овај документ се појављује у следећим колекцијама

Приказ основних података о документу