Претраживање
Приказ резултата 31-40 од 105
Electrochemical deposition of Ni–W alloys from ammonia–citrate electrolyte
(Elsevier, 2003)
Ammonia-citrate electrolyte is one of the solutions that are used in practice for electroplating Ni-W alloys. In this contribution, a systematic effort was made to clarify some controversies about the mechanism of the ...
Electrocatalysis by foreign metal monolayers: Oxidation of formic acid on platinum
(Elsevier, 1975)
It was demonstrated that some foreign metal monolayers formed by underpotential deposition have pronounced catalytic effects on the oxidation of formic acid on platinum. The explanation of these effects was sought within ...
Non-toxic poly(vinyl alcohol)/clay composites as electrode material for detection of 4-chlorophenol and 4-nitrophenol
(Elsevier, 2019)
Development of new electrode materials is necessary for the fabrication of sensors with low detection limits, high sensitivity and broad concentration range. Beside analytical parameters, the ability to replace rare and ...
The electrochemical reduction of trinitrotoluene on a platinum wire modified by chemisorbed acetonitrile
(Elsevier, 2010)
The electrochemical reduction of 2,4,6-trinitrotoluene (TNT) was investigated by cyclic voltammetry on a platinum electrode in aqueous sodium chloride solutions with acetonitrile containing different concentrations of TNT. ...
Two-dimensional electrocrystallization of thallium oxide on the single crystal gold surfaces
(Elsevier, 1984)
The electrocrystallization of thin anodic films on metal electrodes continues
provoke interest since the original work of Bewick et al. [1]. These
studies have been focused on the film formation on mercury [1--3] ...
Catalytic activities of Pt thin films electrodeposited onto Bi coated glassy carbon substrate toward formic acid electrooxidation
(Elsevier, 2014)
Formic acid oxidation was studied on platinum-coated bismuth deposits on glassy carbon substrate. The catalyst was prepared by a two-step process using chronocoulometry, i.e. controlled amount of Bi was electrodeposited ...
On the deactivation mechanism of RuO2–TiO2/Ti anodes prepared by the sol–gel procedure
(Elsevier, 2005)
The deactivation process that leads to the end of titanium supported RuO2-TiO2 coating service life, for anodes prepared from RuO2 and TiO2 sols, as well as by the conventional thermal decomposition of RuCl3 and TiCl3, was ...
Briggs-Rauscher reaction as a novel electrochemical detector for phosphate tungsten and phosphate molybdenum bronzes
(Elsevier, 2019)
Briggs-Rauscher (BR) oscillatory reaction is a chemical system very sensitive to different analyte addition. Changes in oscillatory dynamics, by analyte addition, could be successfully used for the determination of analyte ...
Surface properties of RuO2 + IrO2 mixed oxide electrodes
(Elsevier, 1986)
The surface properties of RuO2 + IrO2 mixed oxide layers deposited on Ti by thermal decomposition of the corresponding chlorides in aqueous solutions have been investigated by means of cyclic voltammetry and ex situ UHV ...
Electrocatalysis of hydrogen evolution on polycrystalline palladium by rhodium nanoislands in alkaline solution
(Elsevier, 2015)
Hydrogen evolution reaction (HER) was investigated on bimetallic Rh/Pd(poly) electrodes in alkaline solution. Bimetallic electrodes were obtained by a spontaneous deposition of rhodium on polycrystalline Pd. Characterization ...