Претраживање
Приказ резултата 1-10 од 33
Formation of Disperse Silver Deposits by the Electrodeposition Processes at High Overpotentials
(Esg, Belgrade, 2012)
In this study, electrodeposition of silver from nitrate solution at the high overpotentials was analyzed. Morphologies of silver deposits obtained at the different overpotentials and with the different electrodeposition ...
Formation of the honeycomb-like electrodes by the regime of pulsating overpotential in the second range
(International Association of Physical Chemists (IAPC), 2012)
In this study the honeycomb-like copper structures electrodeposited by the regime of pulsating overpotential in the second range were analyzed by the technique of scanning electron microscopy. The overpotential amplitude ...
The Effect of Periodically Changing Regimes on the Electrodeposition of Silver Powder
(Esg, Belgrade, 2011)
The effect of different deposition regimes (constant and reversing currents, constant and pulsating overpotential), on the powdered and dendritic silver electrodeposits morphology were investigated. The morphology of ...
Hardness response and adhesion of thin copper films on alloy substrates
(Belgrade: ETRAN – Society for electronics, telecommunication, computing, automatics and nuclear engineering, 2017)
Microhardness test is the most commonly used
method for assessing the mechanical properties of thin films.This testing method uses controlled contact at a single point of an indenter and chosen material which induces the ...
Effect of the electrolysis regime on the structural characteristics of honeycomb-like electrodes
(Soc Chemists Technologists Madeconia, Skopje, 2013)
The effect of different current regimes of electrolysis on the micro- and nanostructural characteristics of open porous structures was examined by the analysis of honeycomb-like copper electrodes obtained by constant ...
Morphology and structure of bright electrodeposited metal coatings
(Soc Chemists Technologists Madeconia, Skopje, 2011)
The properties which determine whether the metal surface is mirror bright are precisely determined by scanning electron microscopy (SEM), atomic forces microscopy (AFM), scanning tunneling microscopy (STM) and reflectance ...
Relationship between the kinetic parameters and morphology of electrochemically deposited lead
(Serbian Chemical Society, 2016)
The processes of lead electrodeposition from electrolytes of various concentrations of sodium nitrate as the supporting electrolyte have been examined by chronoamperometry and by the scanning electron microscopic (SEM) ...
Effect of the orientation of the initially formed grains on the final morphology of electrodeposited lead
(Serbian Chemical Society, 2014)
The processes of Pb electrodeposition under diffusion control were examined by scanning electron microscopy (SEM) of the formed crystals. The orientation of grains of hexagonal shape formed in the initial stage of ...
Randomly oriented twin domains in electrodeposited silver dendrites
(Serbian Chemical Society, 2015)
Silver dendrites were prepared by electrochemical deposition. The structures of the Ag dendrites, the type of twins and their distribution were investigated by scanning electron microscopy (SEM), Z-contrast high angle ...
Ternary Zn-Ni-Co alloy: anomalous codeposition and corrosion stability
(Serbian Chemical Society, 2015)
Electrochemically deposited Zn-Ni-Co alloys under various deposition conditions were investigated using atomic absorption spectroscopy for the determination of the chemical composition, atomic force microscopy for surface ...