Search
Now showing items 1-10 of 14
Process modelling and analysis of plasma electrolytic oxidation of titanium for TiO2/WO3 thin film photocatalysts by response surface methodology
(Elsevier, 2015)
Plasma electrolytic oxidation of titanium in 12-tungstosilicic acid solution was investigated as a model reaction. The influence of the process parameters (concentration of 12-tungstosilicic acid solution, current density, ...
Synthesis and characterization of Al2O3/ZnO coatings formed by plasma electrolytic oxidation
(Elsevier, 2015)
Mixed Al2O3/ZnO coatings are prepared by conventional DC plasma electrolytic oxidation (PEO) of aluminum in boric acid and borax solution containing ZnO nanoparticles. Scanning electron microscopy equipped with energy ...
Surface modification of polyethylene by Ag+ and Au+ ion implantation observed by phase imaging atomic force microscopy
(Elsevier, 2012)
High density polyethylene (HDPE) has been modified by Ag+ and Au+ ion implantation with the energy of 60 and 200 keV, respectively. The doses of implanted silver and gold ions were as follows: 1 x 10(15), 5 x 10(15) and 1 ...
Antimicrobial viscose fabric prepared by treatment in DBD and subsequent deposition of silver and copper ions-Investigation of plasma aging effect
(Elsevier, 2013)
In this work, the effect of dielectric barrier discharge (DBD) in ambient air on preparation of antimicrobial viscose fabric was studied. DBD plasma treatment was applied under constant discharge power and different exposure ...
Characterization and photocatalytic properties of tungsten doped TiO2 coatings on aluminum obtained by plasma electrolytic oxidation
(Elsevier, 2016)
This paper presents a recent investigation of rapid deposition of TiO2 nanoparticles on aluminum by plasma electrolytic oxidation in Na2SiO3 center dot 5H(2)O water based electrolyte with addition of TiO2 nanoparticles and ...
Deposition of silver ions onto DBD and DCSBD plasma treated nonwoven polypropylene
(Elsevier, 2012)
The aim of this work is plasma activation of nonwoven polypropylene (PP) using two different ambient air plasma sources: volume dielectric barrier discharge (DBD) and diffuse coplanar surface barrier discharge (DCSBD) and ...
Anaphoretical/oxidative approach to the in-situ synthesis of adherent hydroxyapatite/titanium oxide composite coatings on titanium
(Elsevier, 2019)
In-situ synthesis of HAp/TiO2 coating on titanium was performed via anaphoretic deposition of HAp and simultaneous anodization of Ti to produce highly adherent and strengthened composite coating. The prepared coatings were ...
MgO/ZnO coatings formed on magnesium alloy AZ31 by plasma electrolytic oxidation: Structural, photoluminescence and photocatalytic investigation
(Elsevier, 2017)
This paper presents the results of our recent investigation of MgO/ZnO coatings formed on AZ31 magnesium alloy by plasma electrolytic oxidation in phosphate-based alkaline electrolyte with varying concentration of ZnO ...
Corrosion stability of Zn-Co alloys deposited from baths with high and low Co content - The influence of deposition current density
(Elsevier, 2010)
Electrochemically deposited Zn-Co alloys under various deposition conditions were investigated using atomic absorption spectroscopy (AAS) for determination of chemical composition, anodic linear sweep voltammetry (ALSV) ...
Corrosion study of ceria coatings on AA6060 aluminum alloy obtained by cathodic electrodeposition: Effect of deposition potential
(Elsevier, 2014)
Among potential replacements for chromates, cerium-based conversion coatings (CeCCs) have been identified as leading candidates, showing a good promise as environmentally compliant corrosion inhibitors on Al alloys. In ...