Претраживање
Приказ резултата 1-2 од 2
Effect of boric acid on the porosity of clay and diatomite monoliths
(Elsevier Sci Ltd, Oxford, 2016)
Porous silica ceramics were obtained at low forming pressure (40-80 MPa) and low sintering temperature (850-1300 degrees C) for 4 h in air. Boric acid was used as a low-cost additive, in the amount of 2 wt%. Relatively ...
Porous ceramic monoliths based on diatomite
(Elsevier Sci Ltd, Oxford, 2015)
Porous silica ceramics were obtained at low forming pressure and low sintering temperature by using diatomaceous earth as a silica source and boric acid as an inexpensive additive. The starting raw material, diatomite from ...