Претраживање
Приказ резултата 1-10 од 1713
Optimization of a nanoparticle ball milling process parameters using the response surface method
(Elsevier, 2018)
Nanocrystalline TiO2-CeO2 powders were synthesized from their TiO2 and CeO2 oxides using mechanical ball milling process. The response surface method is applied to identify optimal parameters for the synthesis of TiO2-CeO2 ...
Ethanol Oxidation on Rh/Pd(poly) in Alkaline Solution
(Oxford : Pergamon-Elsevier Science Ltd, 2016)
Bimetallic electrodes prepared by Rh nanoislands spontaneously deposited on polycrystalline palladium, Pd(poly), at submonolayer coverage were explored for ethanol oxidation in alkaline media. Characterization of obtained ...
Preparation and characterization of Pt-Ba-Al2O3 coatings obtained by spray pyrolysis
(Elsevier Science Sa, Lausanne, 2017)
Pt-Ba-Al2O3 coatings were obtained by spray pyrolysis deposition on stainless steel foil. The XRD results showed that the coatings consisted from Ba carbonate and Pt (fcc) phases. SEM micrographs demonstrated that the ...
C-H/O Interactions of Aromatic CH Donors within Proteins: A Crystallographic Study
(American Chemical Society (ACS), 2016)
C-H/O interactions of aromatic C-H donors within proteins have been studied by analyzing the data in the Protein Data Bank (PDB). The C-H/O interactions were studied between aromatic donors; phenylalanine, tyrosine, and ...
MgO/ZnO coatings formed on magnesium alloy AZ31 by plasma electrolytic oxidation: Structural, photoluminescence and photocatalytic investigation
(Elsevier, 2017)
This paper presents the results of our recent investigation of MgO/ZnO coatings formed on AZ31 magnesium alloy by plasma electrolytic oxidation in phosphate-based alkaline electrolyte with varying concentration of ZnO ...
Structural Properties of the Multiwall Carbon Nanotubes/Poly(Methyl Methacrylate) Nanocomposites: Effect of the Multiwall Carbon Nanotubes Covalent Functionalization
(Wiley, Hoboken, 2017)
The structural characteristics of polymer nanocomposites with functionalized multiwall carbon nanotubes (MWCNTs) in poly(methyl methacrylate) matrix have been studied in relation to nanofiller loading and surface functionality. ...
Tribological characterisation in dry sliding conditions of compocasted hybrid A356/SiCp/Grp composites with graphite macroparticles
(Springer London, 2019)
The influence of SiC microparticles reinforcement and graphite macroparticles addition on the friction and wear characteristics of A356 Al-Si alloys, produced by compocasting, has been assessed using a pin-on-disc tribometer. ...
A novel C,D-spirolactone analogue of paclitaxel: autophagy instead of apoptosis as a previously unknown mechanism of cytotoxic action for taxoids
(Royal Soc Chemistry, Cambridge, 2012)
The design, synthesis and biological evaluation of a novel C, D-spirolactone analogue of paclitaxel is described. This is the first paclitaxel analogue without an oxetane D-ring that shows a significant cytotoxic effect ...
Simulation and experimental study of maskless convex corner compensation in TMAH water solution
(Iop Publishing Ltd, Bristol, 2014)
Maskless etching with convex corner compensation in the form of a LT 100 > oriented beam is investigated using both experiments and simulations. The maskless convex corner compensation technique is defined as a combination ...
Maskless convex corner compensation technique on a (100) silicon substrate in a 25 wt% TMAH water solution
(Iop Publishing Ltd, Bristol, 2012)
A maskless convex corner compensation technique in a 25 wt% TMAH water solution at the temperature of 80 degrees C is presented and analyzed. The maskless convex corner compensation technique is defined as a combination ...