Pretraživanje
Prikaz rezultata 31-40 od 84
Chemical investigation of miscanthus × giganteus Greef et Deu. Cultivated in Serbia: A potential renewable source of energy / Hemijska ispitivanja miskantusa gajenog u Srbiji - potencijalni obnovljiv izvor energije
(Belgrade, Serbia : Engineering Society for Corrosion, 2016)
According to scientific community and professional specialists, urging necessity to increase capacity of sources of energy can be partially achieved by using biomass as a raw material. This approach is justified by both ...
The roughness analysis of metal coatings by STM technique: Part I: Theoretical survey / Analiza hrapavosti galvanskih prevlaka tehnikom skenirajuće tunelske mikroskopije - deo I - teorijski osnovi
(Belgrade, Serbia : Engineering Society for Corrosion, 2002)
In this work is given theoretical base of methodology which, by use STM technique and corresponding STM software, offers an good conveniences for the examination of mechanism of electrode position process.
Direct synthesis of noble metal nanostructures on carbon support by hydrothermal process / Direktna sinteza nanostrukturnog plemenitog metala na ugljeničnoj osnovi pomoću hidrotermalnog procesa
(Belgrade, Serbia : Engineering Society for Corrosion, 2015)
Nanostructures of noble metals (Pt and Ag) on carbon support were prepared from fructose and solution of the Nobel metal salts (H2PtCl6 x 6H2O or AgNO3) under hydrothermal conditions. Commercial fructose (C6H12O6) acts as ...
The roughness analysis of metal coatings by STM technique: Part II: Analysis of zinc coatings / Analiza hrapavosti galvanskih prevlaka tehnikom skenirajuće tunelske mikroskopije - deo II - analiza prevlaka cinka
(Belgrade, Serbia : Engineering Society for Corrosion, 2002)
In this work is given the analysis of roughness of zinc coatings electrodeposited from a sulfate bath in the presence of dextrin and 2-hidroxi-benzaldehyde, by methodology which is described in part I of this work. It was ...
Comparison of morphology of powder particles obtained by the constant and periodically changing regimes of electrolysis / Poređenje morfologije čestica praha dobijenih konstantnim i periodično promenljivim režimima elektrolize
(Belgrade, Serbia : Engineering Society for Corrosion, 2011)
Morphologies of copper powder particles obtained by both potentiostatic and pulsating overpotential (PO) regimes of electrolysis were analyzed using the technique of scanning electron microscopy (SEM). The parameters of ...
Magneto electrochemistry: Basic facts and the effects of the applied magnetic fields onto corrosion of metals, mass transfers, kinetic of process and the preferred orientation of deposits / Magneto-elektrohemija - osnovne činjenice i uticaji primenjenog magnetnog polja na koroziju metala, prenos mase, kinetiku procesa i preferencijalnu orijentaciju taloga
(Belgrade, Serbia : Engineering Society for Corrosion, 2005)
In this work, the theoretical survey of the basic facts about magneto electrochemistry will be given. It will be analyzed the effects of the applied magnetic fields on kinetic of the electrochemical processes, mass transfer ...
Application of polyaniline in corrosion protection of metals / Primena polianilina u zaštiti metala od korozije
(Belgrade, Serbia : Engineering Society for Corrosion, 2012)
Polyaniline is probably the most investigated electroconducting polymer. This popularity is a result of its important features: existence of various oxidation states, electrical and optical activity, low cost monomer, ...
Hydroxyapatite coatings on TiO2 nanotubes / Prevlake hidroksiapatita na nanotubama oksida titana
(Belgrade, Serbia : Engineering Society for Corrosion, 2010)
The aim of this work was to obtain nanotubular TiO2 layer by anodization of titanium substrate, and to prepare hydroxyapatite (HAP) coatings by electrophoretic deposition over nanotubular TiO2 layer. The presence of fluoride ...
Kinetic of corrosion reactions in acid and neutral solutions on electrochemically deposited Ni-W alloys / Kinetika korozionih reakcija u kiselim i neutralnim rastvorima na elektrohemijski taloženim legurama Ni-W
(Belgrade, Serbia : Engineering Society for Corrosion, 2006)
Ni-W alloys were electrochemically deposited from an ammonia-citrate electrolyte on rotating disc electrode with a gold disc, by direct and pulsating current. The corrosion potential and kinetics of cathodic and anodic ...
Tailoring the corrosion resistance of Zn-Mn coating by electrodeposition from deep eutectic solvents / Poboljšanje korozione postojanosti Zn-Mn prevlake, elektrohemijskim taloženjem iz dubokih eutektičkih smeša
(Belgrade, Serbia : Engineering Society for Corrosion, 2018)
Well adhered, homogenous coatings were obtained from deep eutectic solvents (DES) based on choline chloride and urea, at current densities up to 20 mA cm-2. The coatings' morphology was analyzed by atomic force microscopy, ...