Претраживање
Приказ резултата 31-40 од 82
Influence of the structure of metallic chromium on its electrochemical and chemical corrosion / Uticaj strukture metalnog hroma na njegovu elektrohemijsku i hemijsku koroziju
(Belgrade, Serbia : Engineering Society for Corrosion, 2005)
It was shown that metallic chromium in aqueous solution of sulfuric acid dissolves in accord with the electrochemical mechanism proposed by Wagner and Traud, but also by a direct chemical reaction of metal with water ...
Application of polyaniline in corrosion protection of metals / Primena polianilina u zaštiti metala od korozije
(Belgrade, Serbia : Engineering Society for Corrosion, 2012)
Polyaniline is probably the most investigated electroconducting polymer. This popularity is a result of its important features: existence of various oxidation states, electrical and optical activity, low cost monomer, ...
Characterization of soil in the coastal area of the Bor River abstract / Karakterizacija zemljišta u priobalju Borske reke
(Belgrade, Serbia : Engineering Society for Corrosion, 2016)
Production process of copper obtaining in the Mining and Smelting Company (RTB) Bor directly affects the environmental pollution in Bor and surrounding area. Harmful elements present in the air are deposited on the surface ...
Tailoring the corrosion resistance of Zn-Mn coating by electrodeposition from deep eutectic solvents / Poboljšanje korozione postojanosti Zn-Mn prevlake, elektrohemijskim taloženjem iz dubokih eutektičkih smeša
(Belgrade, Serbia : Engineering Society for Corrosion, 2018)
Well adhered, homogenous coatings were obtained from deep eutectic solvents (DES) based on choline chloride and urea, at current densities up to 20 mA cm-2. The coatings' morphology was analyzed by atomic force microscopy, ...
Catalytic effect of sulphuric acid in the process of deposition of chromium coatings / Katalitički uticaj sumporne kiseline u procesu taloženja prevlaka hroma
(Belgrade, Serbia : Engineering Society for Corrosion, 2011)
This paper analyzes the catalytic effect of sulphuric acid on current efficiency, the coating thickness and the rate of deposition of electrochemical chromium coatings. According to the properties of chrome, there are three ...
Investigation of phenol adsorption on macroporous polymeric adsorbents / Ispitivanje adsorpcije fenola na makroporoznim polimernim adsorbensima
(Belgrade, Serbia : Engineering Society for Corrosion, 2015)
This work reports results on phenol adsorption from aqueous solution by porous copolymers based on glycidyl methacrylate: two samples of macroporous crosslinked poly(glycidyl methacrylate-co-ethylene glycol dimethacrylate), ...
PtAu catalyst with enhanced activity for formic acid oxidation / PtAu katalizator sa poboljšanom aktivnošću za reakciju oksidacije mravlje kiseline
(Belgrade, Serbia : Engineering Society for Corrosion, 2018)
PtAu systems are recognized as good catalysts for the oxidation of formic acid electrooxidation, which is investigated as a possible anodic reaction in low-temperature fuel cells. In this research, bimetallic PtAu ...
Solvatochromism of N-aryl-phenylacetamides / Solvatohromizam N-aril-fenilacetamida
(Belgrade, Serbia : Engineering Society for Corrosion, 2016)
Amide derivates are biologically active compounds and they are widely used in all spheres of life. Therefore, it is very important to know their physical-chemical properties. In this work the influence of characteristics ...
Effect of supporting electrolyte on electrolytic degradation of cyanide wastewater / Uticaj hloridnih jona na elektrohemijsku oksidaciju cijanida u otpadnim vodama
(Belgrade, Serbia : Engineering Society for Corrosion, 2014)
The paper describes the influence of chloride ions on the electrochemical oxidation of cyanide from wastewater. Chloride ions are added in the form of NaCl (c=0.017 mol/L), and electrochemical oxidation is carried out in ...
New method of Ni/WC and Cu/WC composite coatings formation / Novi način formiranja kompozitnih prevlaka
(Belgrade, Serbia : Engineering Society for Corrosion, 2004)
Ni/WC and Cu/WC composite coatings were obtained in two steps. The first step consists of the inert WC particles deposition from the aqueous solution onto steel surface by means of a micro-pipette and covering by the dilute ...