Претраживање
Приказ резултата 21-30 од 30
Formiranje Nb taloga na staklastom ugljeniku iz hloroaluminatnog rastopa / Formation of Nb deposit on vitrius carbon from chloroaluminate melts
(Serbian Society of Corrosion and Materials Protection (UISKoZaM), 2016)
Ispitivano je elektrohemijsko taloženje i rastvaranje niobijuma iz rastopa ekvimolarne smeše
aluminijum (III) hlorida i natrijum hlorida, obogaćenog niobijumom, na staklastom ugljeniku.
Elektrotaloženje je izvođeno u ...
Electrodeposition of cobalt powders with novel three-dimensional structure
(Metalurgija, 2011)
Novel three-dimensional cobalt powder structures were successfully prepared by electrodeposition. Electrodeposited cobalt powder was characterized by scanning electron microscopy (SEM) and light microscopy. It was possible ...
Microindentation hardness testing of different composite systems with thin electrodeposited nickel and copper films
(Belgrade : Military Technical Institute, 2012)
Thin Ni and Cu films with fine-grained structures have been electrodeposited from self-made sulphamate-based and sulphate-based electrolytes, respectively. DC electrodeposition of Ni films was performed on single crystal ...
The electrochemical deposition and corrosion stability of Zn-Mn alloy coatings / Elektrohemijsko taloženje i koroziona stabilnost prevlaka Zn-Mn legura
(Belgrade, Serbia : Engineering Society for Corrosion, 2010)
The influence of the type of the deposition solution on the current efficiency during electrodeposition of Zn-Mn alloys was examined. The Zn-Mn alloys were deposited on steel from chloride, sulphate and pyrophosphate plating ...
Electrochemical deposition of titanium and aluminium from equimolar AlCl3+NaCl melt
(Romanian Chemical Society, 2019)
Electrodeposition of Al-Ti based materials is an attractive process offering
many advantages over more conventional processing methods. A number of articles on
aluminium-titanium intermetallics electrodeposited from ...
Preparation and mechanical characterization of copper thin films with additives on alloy substrates
(Belgrade : Institute of Chemistry, Technology and Metallurgy, 2017)
Thin copper films have various application in the electronic industry for the fabrication of
contacts in integrated circuits. Copper electroplating has been widely employed for
fabricating the wires of printed circuit ...
Electrochemical formation of magnesium oxide/hydroxide structures / Elektrohemijsko formiranje različitih oblika magnezijum oksida/hidroksida
(Serbian Society of Corrosion and Materials Protection (UISKoZaM), 2017)
Nanocrystalline magnesium oxides and hydroxides are attracting comprehensive attention due to their high surface area and their specific optical, thermal, electrical and chemical characteristics. Magnesium oxides and ...
The comparative XRD and SEM analysis of electrochemically produced silver nanostructures
(Zagreb, Croatia : Ruđer Bošković Institute and Croatian Microscopy Society, 2017)
Electrodeposition technique is very suitable way to obtain nanostructures of the desired shapes and dimensions. It is attained by the choice of regimes and parameters of electrolysis, such as the type and composition of ...
Uticaj gustine struje na morfologiju elektrohemijski dobijenog bakarnog praha / Influence current density on the morphology electrochemical obtained copper powder
(Podgorica, Crna Gora : Crnogorsko društvo za koroziju, zaštitu materijala i zaštitu životne sredine, 2014)
U radu je ispitivan uticaj gustine struje na morfologiju elektrohemijski dobijenog bakarnog praha.
Vršeno elektrohemijsko taloženje bakarnog praha iz sulfatnih elektrolita. Korišćeni su elektroliti sa tri koncentracije ...
PdNi alloys as efficient catalysts for alcohol oxidation
(Crnogorsko društvo za koroziju, zaštitu materijala i zaštitu životne sredine, 2018)
The investigated PdNi alloys were prepared by electrochemical procedures
through simultaneous deposition of metals from the mixed solutions of their
precursors (0.01M PdCl2 + 0.6MNiCl2 + 2 MNH4Cl). Electrodeposited ...