Претраживање
Приказ резултата 11-17 од 17
Valorization of fly ash from a thermal power plant for producing high-performance self-compacting concrete
(International Institute for the Science of Sintering, Beograd, 2020)
This study analyzes the feasibility of valorizing industrial by-product, fly ash from a
thermal power plant as a partial replacement of mineral filler-limestone for the production of
self-compacting concrete (SCC). Three ...
Application of Ni(II)-alumina Composites for Electrocatalytic Reduction of 4-nitrophenol
(International Institute for the Science of Sintering, Belgrade, 2020)
Nickel-alumina composites with various content of nickel were synthetized by sol-gel method. The characterization of samples was performed by diffuse reflectance spectroscopy and electrochemical impedance spectroscopy using ...
Macroporous monoliths based оn natural mineral sources, clay аnd diatomite
(Belgrade : Association for ETRAN Society, 2020)
Macroporous silica ceramic was obtained using clay and diatomite. Boric acid as a low-cost additive in the amount of 1 wt% was used. These porous materials were obtained at low forming pressure (40-80 MPa) and lower sintering ...
The Influence of pH on Electrochemical Behavior of Nicotine- Clay based Electrodes
(Belgrade : International Institute for the Science of Sintering (IISS), 2021)
Montmorillonite based clay was acid activated. Nicotine was adsorbed on untreated
and acid activated clay from its aqueous solution at either pH=6 or pH=9.26 (unadjusted pH
solution). The XRD analysis revealed that the ...
Effect оf delamination оn physico-chemical properties оf kaolin
(International Institute for the Science of Sintering (IISS), 2021)
To provide the quality required for its use, raw kaolin must be subjected to certain processing procedures like delamination which is applied to the layered structure materials. The aim of this research is to determine the ...
Impact of Alumina Particles on the Morphology and Mechanics of Hybrid Wood Plastic Composite Materials
(Belgrade : Association for ETRAN Society, 2019)
Hybrid composite panels of Wood-Plastic Composites (WPC) consisting of wood and
poly (methyl methacrylate) (PMMA) were reinforced with alumina particles and made by
“hot pressing” method. Alumina-based particles were ...
The influence of strontium content and sintering temperature on monazite stability
(Association for ETRAN Society, 2024)
This paper shows a simple way to synthesize a series of Ce1-xSrxPO4 ceramic materials using acetate solutions of Ce and Sr instead of nitrate which were used so far. For synthesis, the preparation method was used by simple ...