Претраживање
Приказ резултата 21-30 од 33
The study of Zn-Co alloy coatings electrochemically deposited by pulse current / Ispitivanje prevlaka Zn-Co legura dobijenih pulsirajućom strujom
(Association of Chemical Engineers of Serbia, 2012)
The electrochemical deposition by pulse current of Zn-Co alloy coatings on steel was examined, with the aim to find out whether pulse plating could produce alloys that could offer a better corrosion protection. The influence ...
Microstructure and corrosion behaviour of Zn-Co alloys deposited from three different plating baths / Mikrostruktura i koroziono ponašanje Zn-Co legura taloženih iz sulfatnog i hloridnih rastvora
(Serbian Chemical Society, 2011)
The effects of plating baths of different composition on the micro- structure and corrosion stability of Zn-Co alloy coatings were studied. Zn-Co alloys with the same Co content were deposited from chloride plating baths ...
Influence of the type of electrolyte on the morphological and crystallographic characteristics of lead powder particles / Uticaj tipa elektrolita na morfološke i kristalografske karakteristike praškastih čestica olova
(Serbian Chemical Society, 2013)
Lead electrodeposition processes from basic (nitrate) and complex (acetate) electrolytes were mutually compared by scanning electron microscopy and X-ray diffraction investigation of the produced powder particles. The shape ...
Formiranje Nb taloga na staklastom ugljeniku iz hloroaluminatnog rastopa / Formation of Nb deposit on vitrius carbon from chloroaluminate melts
(Serbian Society of Corrosion and Materials Protection (UISKoZaM), 2016)
Ispitivano je elektrohemijsko taloženje i rastvaranje niobijuma iz rastopa ekvimolarne smeše
aluminijum (III) hlorida i natrijum hlorida, obogaćenog niobijumom, na staklastom ugljeniku.
Elektrotaloženje je izvođeno u ...
PdNi alloys as efficient catalysts for alcohol oxidation
(Crnogorsko društvo za koroziju, zaštitu materijala i zaštitu životne sredine, 2018)
The investigated PdNi alloys were prepared by electrochemical procedures
through simultaneous deposition of metals from the mixed solutions of their
precursors (0.01M PdCl2 + 0.6MNiCl2 + 2 MNH4Cl). Electrodeposited ...
Electrochemical formation of magnesium oxide/hydroxide structures / Elektrohemijsko formiranje različitih oblika magnezijum oksida/hidroksida
(Serbian Society of Corrosion and Materials Protection (UISKoZaM), 2017)
Nanocrystalline magnesium oxides and hydroxides are attracting comprehensive attention due to their high surface area and their specific optical, thermal, electrical and chemical characteristics. Magnesium oxides and ...
Electrodeposition of cobalt powders with novel three-dimensional structure
(Metalurgija, 2011)
Novel three-dimensional cobalt powder structures were successfully prepared by electrodeposition. Electrodeposited cobalt powder was characterized by scanning electron microscopy (SEM) and light microscopy. It was possible ...
The electrochemical deposition and corrosion stability of Zn-Mn alloy coatings / Elektrohemijsko taloženje i koroziona stabilnost prevlaka Zn-Mn legura
(Belgrade, Serbia : Engineering Society for Corrosion, 2010)
The influence of the type of the deposition solution on the current efficiency during electrodeposition of Zn-Mn alloys was examined. The Zn-Mn alloys were deposited on steel from chloride, sulphate and pyrophosphate plating ...
Microindentation hardness testing of different composite systems with thin electrodeposited nickel and copper films
(Belgrade : Military Technical Institute, 2012)
Thin Ni and Cu films with fine-grained structures have been electrodeposited from self-made sulphamate-based and sulphate-based electrolytes, respectively. DC electrodeposition of Ni films was performed on single crystal ...
Preparation and mechanical characterization of copper thin films with additives on alloy substrates
(Belgrade : Institute of Chemistry, Technology and Metallurgy, 2017)
Thin copper films have various application in the electronic industry for the fabrication of
contacts in integrated circuits. Copper electroplating has been widely employed for
fabricating the wires of printed circuit ...