TY  - JOUR
AU  - Pavlović, Miomir
AU  - Pavlović, Ljubica J.
AU  - Doroslovački, Ivo
AU  - Nikolić, Nebojša D.
PY  - 2004
UR  - https://cer.ihtm.bg.ac.rs/handle/123456789/4107
AB  - One of the main concerns in the production of electrolytic copper powder is stabilisation. Nonstabilised powder has a large surface area exposed to the effects of oxygen and moisture from the air. This leads to oxidation and formation of corrosion products on the grain surface and, in this way, the powder becomes unsuitable for sintering. Stabilisation is mostly obtained by interaction between the clean surface of the electrodeposited copper powder and a solution of an active substance, which inhibits the corrosion of copper powders. This work describes the stabilisation of copper powders using a new method. The oxygen content, moisture content, and corrosion resistance of the stabilised electrolytic copper powder were determined. These values are compared with the corresponding values of other corrosion inhibitors of copper powder.
PB  - Elsevier
T2  - Hydrometallurgy
T1  - The effect of benzoic acid on the corrosion and stabilisation of electrodeposited copper powder
VL  - 73
IS  - 1-2
SP  - 155
EP  - 162
DO  - 10.1016/j.hydromet.2003.08.005
ER  - 

@article{
author = "Pavlović, Miomir and Pavlović, Ljubica J. and Doroslovački, Ivo and Nikolić, Nebojša D.",
year = "2004",
abstract = "One of the main concerns in the production of electrolytic copper powder is stabilisation. Nonstabilised powder has a large surface area exposed to the effects of oxygen and moisture from the air. This leads to oxidation and formation of corrosion products on the grain surface and, in this way, the powder becomes unsuitable for sintering. Stabilisation is mostly obtained by interaction between the clean surface of the electrodeposited copper powder and a solution of an active substance, which inhibits the corrosion of copper powders. This work describes the stabilisation of copper powders using a new method. The oxygen content, moisture content, and corrosion resistance of the stabilised electrolytic copper powder were determined. These values are compared with the corresponding values of other corrosion inhibitors of copper powder.",
publisher = "Elsevier",
journal = "Hydrometallurgy",
title = "The effect of benzoic acid on the corrosion and stabilisation of electrodeposited copper powder",
volume = "73",
number = "1-2",
pages = "155-162",
doi = "10.1016/j.hydromet.2003.08.005"
}

Pavlović, M., Pavlović, L. J., Doroslovački, I.,& Nikolić, N. D.. (2004). The effect of benzoic acid on the corrosion and stabilisation of electrodeposited copper powder. in Hydrometallurgy
Elsevier., 73(1-2), 155-162.
https://doi.org/10.1016/j.hydromet.2003.08.005

Pavlović M, Pavlović LJ, Doroslovački I, Nikolić ND. The effect of benzoic acid on the corrosion and stabilisation of electrodeposited copper powder. in Hydrometallurgy. 2004;73(1-2):155-162.
doi:10.1016/j.hydromet.2003.08.005 .

Pavlović, Miomir, Pavlović, Ljubica J., Doroslovački, Ivo, Nikolić, Nebojša D., "The effect of benzoic acid on the corrosion and stabilisation of electrodeposited copper powder" in Hydrometallurgy, 73, no. 1-2 (2004):155-162,
https://doi.org/10.1016/j.hydromet.2003.08.005 . .

TY  - JOUR
AU  - Nikolić, Nebojša D.
AU  - Rakočević, Zlatko Lj.
AU  - Popov, Konstantin I.
PY  - 2004
UR  - https://cer.ihtm.bg.ac.rs/handle/123456789/4119
AB  - Reflection and structural analyses of different copper and zinc coatings were performed. The copper coatings were electrodeposited from a sulfate solution in the presence of thiourea, as well as in the presence of modified polyglycol ether, PEG 6000 and 3-mercaptopropanesulfonate.
The zinc coating was electrodeposited from a sulfate solution in the presence of a dextrin/salicylaldehyde mixture. They were examined by STM and X-ray diffraction analysis, and measurements of the reflection of light from their surfaces were taken. The mean sizes of atomically flat parts of these surfaces were estimated by the STM software measurements,
using options for the determination of the autocovariance function and the power spectral density
function. It was shown that the mean sizes of atomically flat parts of the copper coatings were several times greater than the mean size of atomically flat parts of the zinc coating. This difference probably leads to the difference in the maximum degrees of mirror reflection between copper and zinc coatings.
PB  - Springer
T2  - Journal of Solid State Electrochemistry
T1  - Reflection and structural analyses of mirror-bright metal coatings
VL  - 8
SP  - 526
EP  - 531
DO  - 10.1007/s10008-003-0467-8
ER  - 

@article{
author = "Nikolić, Nebojša D. and Rakočević, Zlatko Lj. and Popov, Konstantin I.",
year = "2004",
abstract = "Reflection and structural analyses of different copper and zinc coatings were performed. The copper coatings were electrodeposited from a sulfate solution in the presence of thiourea, as well as in the presence of modified polyglycol ether, PEG 6000 and 3-mercaptopropanesulfonate.
The zinc coating was electrodeposited from a sulfate solution in the presence of a dextrin/salicylaldehyde mixture. They were examined by STM and X-ray diffraction analysis, and measurements of the reflection of light from their surfaces were taken. The mean sizes of atomically flat parts of these surfaces were estimated by the STM software measurements,
using options for the determination of the autocovariance function and the power spectral density
function. It was shown that the mean sizes of atomically flat parts of the copper coatings were several times greater than the mean size of atomically flat parts of the zinc coating. This difference probably leads to the difference in the maximum degrees of mirror reflection between copper and zinc coatings.",
publisher = "Springer",
journal = "Journal of Solid State Electrochemistry",
title = "Reflection and structural analyses of mirror-bright metal coatings",
volume = "8",
pages = "526-531",
doi = "10.1007/s10008-003-0467-8"
}

Nikolić, N. D., Rakočević, Z. Lj.,& Popov, K. I.. (2004). Reflection and structural analyses of mirror-bright metal coatings. in Journal of Solid State Electrochemistry
Springer., 8, 526-531.
https://doi.org/10.1007/s10008-003-0467-8

Nikolić ND, Rakočević ZL, Popov KI. Reflection and structural analyses of mirror-bright metal coatings. in Journal of Solid State Electrochemistry. 2004;8:526-531.
doi:10.1007/s10008-003-0467-8 .

Nikolić, Nebojša D., Rakočević, Zlatko Lj., Popov, Konstantin I., "Reflection and structural analyses of mirror-bright metal coatings" in Journal of Solid State Electrochemistry, 8 (2004):526-531,
https://doi.org/10.1007/s10008-003-0467-8 . .

TY  - JOUR
AU  - Nikolić, Nebojša D.
AU  - Novaković, Goran
AU  - Rakočević, Zlatko Lj.
AU  - Đurović, Dejan
AU  - Popov, Konstantin I.
PY  - 2002
UR  - https://cer.ihtm.bg.ac.rs/handle/123456789/4106
AB  - Reflection and structural analyses of different copper and zinc coatings were performed. The coatings of copper obtained were from acid sulfate solutions in the absence and presence of thiourea. The coatings of zinc were obtained from acid sulfate solutions in the absence and presence of dextrin and furfural. They were examined by STM, X-ray diffraction (XRD) analysis, and measurements of the reflection of light from their surfaces were taken. Reflection of light from zinc and copper coatings obtained from corresponding pure sulfate solutions was mostly diffuse reflection. The copper coating obtained in the presence of thiourea and the zinc coating obtained in the presence of dextrin and furfural showed a high degree of mirror reflection, and based on structural analysis are characterised as mirror bright metal surfaces.
PB  - Elsevier
T2  - Surface and Coatings Technology
T1  - Comparative reflection and structural analyses of copper and zinc coatings electrodeposited from acid sulfate solutions without and with additives
VL  - 161
IS  - 2-3
SP  - 188
EP  - 194
DO  - 10.1016/S0257-8972(02)00517-0
ER  - 

@article{
author = "Nikolić, Nebojša D. and Novaković, Goran and Rakočević, Zlatko Lj. and Đurović, Dejan and Popov, Konstantin I.",
year = "2002",
abstract = "Reflection and structural analyses of different copper and zinc coatings were performed. The coatings of copper obtained were from acid sulfate solutions in the absence and presence of thiourea. The coatings of zinc were obtained from acid sulfate solutions in the absence and presence of dextrin and furfural. They were examined by STM, X-ray diffraction (XRD) analysis, and measurements of the reflection of light from their surfaces were taken. Reflection of light from zinc and copper coatings obtained from corresponding pure sulfate solutions was mostly diffuse reflection. The copper coating obtained in the presence of thiourea and the zinc coating obtained in the presence of dextrin and furfural showed a high degree of mirror reflection, and based on structural analysis are characterised as mirror bright metal surfaces.",
publisher = "Elsevier",
journal = "Surface and Coatings Technology",
title = "Comparative reflection and structural analyses of copper and zinc coatings electrodeposited from acid sulfate solutions without and with additives",
volume = "161",
number = "2-3",
pages = "188-194",
doi = "10.1016/S0257-8972(02)00517-0"
}

Nikolić, N. D., Novaković, G., Rakočević, Z. Lj., Đurović, D.,& Popov, K. I.. (2002). Comparative reflection and structural analyses of copper and zinc coatings electrodeposited from acid sulfate solutions without and with additives. in Surface and Coatings Technology
Elsevier., 161(2-3), 188-194.
https://doi.org/10.1016/S0257-8972(02)00517-0

Nikolić ND, Novaković G, Rakočević ZL, Đurović D, Popov KI. Comparative reflection and structural analyses of copper and zinc coatings electrodeposited from acid sulfate solutions without and with additives. in Surface and Coatings Technology. 2002;161(2-3):188-194.
doi:10.1016/S0257-8972(02)00517-0 .

Nikolić, Nebojša D., Novaković, Goran, Rakočević, Zlatko Lj., Đurović, Dejan, Popov, Konstantin I., "Comparative reflection and structural analyses of copper and zinc coatings electrodeposited from acid sulfate solutions without and with additives" in Surface and Coatings Technology, 161, no. 2-3 (2002):188-194,
https://doi.org/10.1016/S0257-8972(02)00517-0 . .