TY  - CONF
AU  - Polić-Radovanović, Suzana R.
AU  - Srećković, Milesa
AU  - Timotijević, Biljana
AU  - Timotijević, Miroslav
AU  - Rajković, Višeslava
AU  - Radovanović, Radovan
AU  - Bokić, Bojana
PY  - 2010
UR  - https://cer.ihtm.bg.ac.rs/handle/123456789/7629
AB  - In determining the autenticity of materials and technological processes in the creation of objects of art, comparative analysis provides information necessary for conservation planning. This is of particular importance for rare preserved artifacts that belong to the same school of art, or author. Here, we present the first experimental data concerning the identification of the authentification characteristics, being part of a large project that has as its finala im the evaluation of the effectiveness and effects of the cleaning agent on the paint layers material from the icon of the Virgin Mary with Christ, the Monastery St. Prohor Pčinjski, Serbia.
PB  - Beograd: Srpsko društvo za mikroskopiju / Belgrade: Serbian Society for Microscopy
PB  - Beograd: Institut za nuklearne nauke Vinča, Univerzitet u Beogradu / Belgrade: Vinča Institute of Nuclear Sciences, University of Belgrade
PB  - Beograd: Biološki fakultet, Univerzitet u Beogradu / Belgrade: Faculty of Biology, Institute of Zoology, University of Belgrade
PB  - Beograd: Institut za biološka istraživanja "Siniša Stanković", Univerzitet u Beogradu / Belgrade: Institute for Biological Research "Siniša Stanković", University of Belgrade
PB  - Novi Sad: Fakultet tehničkih nauka, Univerzitet u Novom Sadu / Novi Sad: Faculty of Technical Science, University of Novi Sad
C3  - Program and Proceedings - 4th Serbian Congress for Microscopy, October 11-12.2010, Belgrade, Serbia
T1  - The role of microscopy in the evaluation of the autenticity of the material of cultural heritage
SP  - 83
EP  - 84
UR  - https://hdl.handle.net/21.15107/rcub_cer_7629
ER  - 

@conference{
author = "Polić-Radovanović, Suzana R. and Srećković, Milesa and Timotijević, Biljana and Timotijević, Miroslav and Rajković, Višeslava and Radovanović, Radovan and Bokić, Bojana",
year = "2010",
abstract = "In determining the autenticity of materials and technological processes in the creation of objects of art, comparative analysis provides information necessary for conservation planning. This is of particular importance for rare preserved artifacts that belong to the same school of art, or author. Here, we present the first experimental data concerning the identification of the authentification characteristics, being part of a large project that has as its finala im the evaluation of the effectiveness and effects of the cleaning agent on the paint layers material from the icon of the Virgin Mary with Christ, the Monastery St. Prohor Pčinjski, Serbia.",
publisher = "Beograd: Srpsko društvo za mikroskopiju / Belgrade: Serbian Society for Microscopy, Beograd: Institut za nuklearne nauke Vinča, Univerzitet u Beogradu / Belgrade: Vinča Institute of Nuclear Sciences, University of Belgrade, Beograd: Biološki fakultet, Univerzitet u Beogradu / Belgrade: Faculty of Biology, Institute of Zoology, University of Belgrade, Beograd: Institut za biološka istraživanja "Siniša Stanković", Univerzitet u Beogradu / Belgrade: Institute for Biological Research "Siniša Stanković", University of Belgrade, Novi Sad: Fakultet tehničkih nauka, Univerzitet u Novom Sadu / Novi Sad: Faculty of Technical Science, University of Novi Sad",
journal = "Program and Proceedings - 4th Serbian Congress for Microscopy, October 11-12.2010, Belgrade, Serbia",
title = "The role of microscopy in the evaluation of the autenticity of the material of cultural heritage",
pages = "83-84",
url = "https://hdl.handle.net/21.15107/rcub_cer_7629"
}

Polić-Radovanović, S. R., Srećković, M., Timotijević, B., Timotijević, M., Rajković, V., Radovanović, R.,& Bokić, B.. (2010). The role of microscopy in the evaluation of the autenticity of the material of cultural heritage. in Program and Proceedings - 4th Serbian Congress for Microscopy, October 11-12.2010, Belgrade, Serbia
Beograd: Srpsko društvo za mikroskopiju / Belgrade: Serbian Society for Microscopy., 83-84.
https://hdl.handle.net/21.15107/rcub_cer_7629

Polić-Radovanović SR, Srećković M, Timotijević B, Timotijević M, Rajković V, Radovanović R, Bokić B. The role of microscopy in the evaluation of the autenticity of the material of cultural heritage. in Program and Proceedings - 4th Serbian Congress for Microscopy, October 11-12.2010, Belgrade, Serbia. 2010;:83-84.
https://hdl.handle.net/21.15107/rcub_cer_7629 .

Polić-Radovanović, Suzana R., Srećković, Milesa, Timotijević, Biljana, Timotijević, Miroslav, Rajković, Višeslava, Radovanović, Radovan, Bokić, Bojana, "The role of microscopy in the evaluation of the autenticity of the material of cultural heritage" in Program and Proceedings - 4th Serbian Congress for Microscopy, October 11-12.2010, Belgrade, Serbia (2010):83-84,
https://hdl.handle.net/21.15107/rcub_cer_7629 .

TY  - JOUR
AU  - Cvijović, Ivana
AU  - Jovanović, Milan T.
AU  - Vasiljević-Radović, Dana
AU  - Peruško, Davor
PY  - 2006
UR  - https://cer.ihtm.bg.ac.rs/handle/123456789/7484
AB  - The effect of an 80Ni-20Cr (at.%) metallic coating on the cyclic oxidation behaviour of a Ti3Al-based alloy with the composition Ti-25Al-11Nb (at.%) was investigated in this study. Cyclic oxidation tests were carried out in air at 600 degrees C and 900 degrees C for 120 h. For one cycle test, the specimens were held for 24 h at test temperature and then furnace-cooled to room temperature. The oxidation rate was determined by plotting the mass gain per unit surface area of the specimen vs. exposure time. The morphology and composition of the oxidation products were characterized on the cross-section of the specimens by scanning electron microscopy, energy-dispersive X-ray spectroscopy and atomic force microscopy. The oxidation scale forms during exposure at both 600 degrees C and 900 degrees C. TiO2 is the main oxide component, whereas the Al2O3 layer appears only discontinuously. The remarkable improvement in oxidation resistance at 900 degrees C was attributed to the chemical composition and structure of the scale formed on the 80Ni-20Cr coating.
PB  - John Wiley & Sons, Inc.
T2  - Journal of Microscopy
T1  - The effect of an Ni-Cr protective layer on cyclic oxidation of TiAl
VL  - 224
SP  - 68
EP  - 71
DO  - 10.1111/j.1365-2818.2006.01667.x
ER  - 

@article{
author = "Cvijović, Ivana and Jovanović, Milan T. and Vasiljević-Radović, Dana and Peruško, Davor",
year = "2006",
abstract = "The effect of an 80Ni-20Cr (at.%) metallic coating on the cyclic oxidation behaviour of a Ti3Al-based alloy with the composition Ti-25Al-11Nb (at.%) was investigated in this study. Cyclic oxidation tests were carried out in air at 600 degrees C and 900 degrees C for 120 h. For one cycle test, the specimens were held for 24 h at test temperature and then furnace-cooled to room temperature. The oxidation rate was determined by plotting the mass gain per unit surface area of the specimen vs. exposure time. The morphology and composition of the oxidation products were characterized on the cross-section of the specimens by scanning electron microscopy, energy-dispersive X-ray spectroscopy and atomic force microscopy. The oxidation scale forms during exposure at both 600 degrees C and 900 degrees C. TiO2 is the main oxide component, whereas the Al2O3 layer appears only discontinuously. The remarkable improvement in oxidation resistance at 900 degrees C was attributed to the chemical composition and structure of the scale formed on the 80Ni-20Cr coating.",
publisher = "John Wiley & Sons, Inc.",
journal = "Journal of Microscopy",
title = "The effect of an Ni-Cr protective layer on cyclic oxidation of TiAl",
volume = "224",
pages = "68-71",
doi = "10.1111/j.1365-2818.2006.01667.x"
}

Cvijović, I., Jovanović, M. T., Vasiljević-Radović, D.,& Peruško, D.. (2006). The effect of an Ni-Cr protective layer on cyclic oxidation of TiAl. in Journal of Microscopy
John Wiley & Sons, Inc.., 224, 68-71.
https://doi.org/10.1111/j.1365-2818.2006.01667.x

Cvijović I, Jovanović MT, Vasiljević-Radović D, Peruško D. The effect of an Ni-Cr protective layer on cyclic oxidation of TiAl. in Journal of Microscopy. 2006;224:68-71.
doi:10.1111/j.1365-2818.2006.01667.x .

Cvijović, Ivana, Jovanović, Milan T., Vasiljević-Radović, Dana, Peruško, Davor, "The effect of an Ni-Cr protective layer on cyclic oxidation of TiAl" in Journal of Microscopy, 224 (2006):68-71,
https://doi.org/10.1111/j.1365-2818.2006.01667.x . .