TY  - JOUR
AU  - Manasijević, Dragan
AU  - Balanović, Ljubiša
AU  - Holjevac Grgurić, Tamara
AU  - Gorgievski, Milan
AU  - Marković, Ivana
AU  - Ćosović, Vladan
AU  - Premović, Milena
AU  - Minić, Duško
PY  - 2020
UR  - https://cer.ihtm.bg.ac.rs/handle/123456789/3781
AB  - Low-melting alloys, based on bismuth and indium, have found commercial use in soldering, safety devices, coatings, and bonding applications. In this respect, the accurate knowledge  of  their  thermal  properties  such  as  melting  and  solidification  temperatures, latent heat of melting, supercooling tendency, etc. is of large importance. In the present research,   low-melting   alloy   with   nominal   composition   Bi40In40Pb20(at.   %)   was investigated by means of scanning electron microscopy(SEM) with energy dispersive X-ray spectrometry (EDS) and by differential scanning calorimetry (DSC). Microstructural and chemical (SEM-EDS) analysis has revealed the existence of two coexisting phases in the  prepared  alloy,  which  was  identified  as  BiInand  (Pb).  Melting  and  solidification temperatures  and  the  related  heat  effects  were  measured  by  the  DSC  technique.  The solidus temperature obtained from the DSC heating curves was 76.3 °C and the solidus temperature  obtained  from  the  corresponding  DSC  cooling  runs  was  61.2  °C.  The experimentally  obtained  results  were  compared  with  the  results  of  thermodynamic calculation according to CALPHAD (calculation of phase diagram) approach, and a close agreement was noticed.
PB  - Association of Metallurgical Engineers of Serbia (AMES)
T2  - Metallurgical and Materials Engineering
T1  - Thermal and microstructural analysis of the low-melting Bi-In-Pb alloy
VL  - 26
IS  - 4
SP  - 385
EP  - 394
DO  - 10.30544/564
ER  - 

@article{
author = "Manasijević, Dragan and Balanović, Ljubiša and Holjevac Grgurić, Tamara and Gorgievski, Milan and Marković, Ivana and Ćosović, Vladan and Premović, Milena and Minić, Duško",
year = "2020",
abstract = "Low-melting alloys, based on bismuth and indium, have found commercial use in soldering, safety devices, coatings, and bonding applications. In this respect, the accurate knowledge  of  their  thermal  properties  such  as  melting  and  solidification  temperatures, latent heat of melting, supercooling tendency, etc. is of large importance. In the present research,   low-melting   alloy   with   nominal   composition   Bi40In40Pb20(at.   %)   was investigated by means of scanning electron microscopy(SEM) with energy dispersive X-ray spectrometry (EDS) and by differential scanning calorimetry (DSC). Microstructural and chemical (SEM-EDS) analysis has revealed the existence of two coexisting phases in the  prepared  alloy,  which  was  identified  as  BiInand  (Pb).  Melting  and  solidification temperatures  and  the  related  heat  effects  were  measured  by  the  DSC  technique.  The solidus temperature obtained from the DSC heating curves was 76.3 °C and the solidus temperature  obtained  from  the  corresponding  DSC  cooling  runs  was  61.2  °C.  The experimentally  obtained  results  were  compared  with  the  results  of  thermodynamic calculation according to CALPHAD (calculation of phase diagram) approach, and a close agreement was noticed.",
publisher = "Association of Metallurgical Engineers of Serbia (AMES)",
journal = "Metallurgical and Materials Engineering",
title = "Thermal and microstructural analysis of the low-melting Bi-In-Pb alloy",
volume = "26",
number = "4",
pages = "385-394",
doi = "10.30544/564"
}

Manasijević, D., Balanović, L., Holjevac Grgurić, T., Gorgievski, M., Marković, I., Ćosović, V., Premović, M.,& Minić, D.. (2020). Thermal and microstructural analysis of the low-melting Bi-In-Pb alloy. in Metallurgical and Materials Engineering
Association of Metallurgical Engineers of Serbia (AMES)., 26(4), 385-394.
https://doi.org/10.30544/564

Manasijević D, Balanović L, Holjevac Grgurić T, Gorgievski M, Marković I, Ćosović V, Premović M, Minić D. Thermal and microstructural analysis of the low-melting Bi-In-Pb alloy. in Metallurgical and Materials Engineering. 2020;26(4):385-394.
doi:10.30544/564 .

Manasijević, Dragan, Balanović, Ljubiša, Holjevac Grgurić, Tamara, Gorgievski, Milan, Marković, Ivana, Ćosović, Vladan, Premović, Milena, Minić, Duško, "Thermal and microstructural analysis of the low-melting Bi-In-Pb alloy" in Metallurgical and Materials Engineering, 26, no. 4 (2020):385-394,
https://doi.org/10.30544/564 . .