TY  - JOUR
AU  - Nikolić, Ines
AU  - Lunter, Dominique Jasmin
AU  - Randjelović, Danijela
AU  - Žugić, Ana
AU  - Tadić, Vanja
AU  - Marković, Bojan D.
AU  - Cekic, Nebojsa
AU  - Živković, Lada
AU  - Topalovic, Dijana
AU  - Spremo-Potparević, Biljana
AU  - Daniels, Rolf
AU  - Savić, Snežana D.
PY  - 2018
UR  - https://cer.ihtm.bg.ac.rs/handle/123456789/3719
AB  - The objective of this work was to investigate and profoundly characterize low-energy nanoemulsions as multifunctional carriers, with slight reference to dermal administration. An evidence-based approach was offered for deepening the knowledge on their formation via spontaneous emulsification. Curcumin, a compound of natural origin, potentially powerful therapeutic, was chosen as a model API. Due to curcumin's demanding properties (instability, poor solubility, low permeability), its potentials remain unreached. Low-energy nanoemulsions were considered carriers capable of overcoming imposed obstacles. Formulation consisting of Polysorbate 80 and soybean lecithin as stabilizers (9:1, 10%), medium-chain triglycerides as the oil phase (10%) and ultrapure water was selected for curcumin incorporation in 3 different concentrations (1, 2 and 3 mg/mL). Physicochemical stability was demonstrated during 3 months of monitoring (mean droplet size: 111.3-146.8 nm; PDI  LT  0.2; pH: 4.73-5.73). Curcumin's release from developed vehicles followed Higuchi's kinetics. DPPH (IC50 = 0.1187 mg/ mL) and FRAP (1.19 +/- 0.02 mmol/g) assays confirmed that curcumin acts as a potent antioxidant through different mechanisms, with no alterations after incorporation in the formulation. High biocompatibility in line with antigenotoxic activity of curcumin-loaded formulations (protective and reparative) was estimated through Comet assay. A multidisciplinary approach is needed to fully characterize developed systems, directing them to more concrete application possibilities.
PB  - Elsevier
T2  - International Journal of Pharmaceutics
T1  - Curcumin-loaded low-energy nanoemulsions as a prototype of multifunctional vehicles for different administration routes: Physicochemical and in vitro peculiarities important for dermal application
VL  - 550
IS  - 1-2
SP  - 333
EP  - 346
DO  - 10.1016/j.ijpharm.2018.08.060
ER  - 

@article{
author = "Nikolić, Ines and Lunter, Dominique Jasmin and Randjelović, Danijela and Žugić, Ana and Tadić, Vanja and Marković, Bojan D. and Cekic, Nebojsa and Živković, Lada and Topalovic, Dijana and Spremo-Potparević, Biljana and Daniels, Rolf and Savić, Snežana D.",
year = "2018",
abstract = "The objective of this work was to investigate and profoundly characterize low-energy nanoemulsions as multifunctional carriers, with slight reference to dermal administration. An evidence-based approach was offered for deepening the knowledge on their formation via spontaneous emulsification. Curcumin, a compound of natural origin, potentially powerful therapeutic, was chosen as a model API. Due to curcumin's demanding properties (instability, poor solubility, low permeability), its potentials remain unreached. Low-energy nanoemulsions were considered carriers capable of overcoming imposed obstacles. Formulation consisting of Polysorbate 80 and soybean lecithin as stabilizers (9:1, 10%), medium-chain triglycerides as the oil phase (10%) and ultrapure water was selected for curcumin incorporation in 3 different concentrations (1, 2 and 3 mg/mL). Physicochemical stability was demonstrated during 3 months of monitoring (mean droplet size: 111.3-146.8 nm; PDI  LT  0.2; pH: 4.73-5.73). Curcumin's release from developed vehicles followed Higuchi's kinetics. DPPH (IC50 = 0.1187 mg/ mL) and FRAP (1.19 +/- 0.02 mmol/g) assays confirmed that curcumin acts as a potent antioxidant through different mechanisms, with no alterations after incorporation in the formulation. High biocompatibility in line with antigenotoxic activity of curcumin-loaded formulations (protective and reparative) was estimated through Comet assay. A multidisciplinary approach is needed to fully characterize developed systems, directing them to more concrete application possibilities.",
publisher = "Elsevier",
journal = "International Journal of Pharmaceutics",
title = "Curcumin-loaded low-energy nanoemulsions as a prototype of multifunctional vehicles for different administration routes: Physicochemical and in vitro peculiarities important for dermal application",
volume = "550",
number = "1-2",
pages = "333-346",
doi = "10.1016/j.ijpharm.2018.08.060"
}

Nikolić, I., Lunter, D. J., Randjelović, D., Žugić, A., Tadić, V., Marković, B. D., Cekic, N., Živković, L., Topalovic, D., Spremo-Potparević, B., Daniels, R.,& Savić, S. D.. (2018). Curcumin-loaded low-energy nanoemulsions as a prototype of multifunctional vehicles for different administration routes: Physicochemical and in vitro peculiarities important for dermal application. in International Journal of Pharmaceutics
Elsevier., 550(1-2), 333-346.
https://doi.org/10.1016/j.ijpharm.2018.08.060

Nikolić I, Lunter DJ, Randjelović D, Žugić A, Tadić V, Marković BD, Cekic N, Živković L, Topalovic D, Spremo-Potparević B, Daniels R, Savić SD. Curcumin-loaded low-energy nanoemulsions as a prototype of multifunctional vehicles for different administration routes: Physicochemical and in vitro peculiarities important for dermal application. in International Journal of Pharmaceutics. 2018;550(1-2):333-346.
doi:10.1016/j.ijpharm.2018.08.060 .

Nikolić, Ines, Lunter, Dominique Jasmin, Randjelović, Danijela, Žugić, Ana, Tadić, Vanja, Marković, Bojan D., Cekic, Nebojsa, Živković, Lada, Topalovic, Dijana, Spremo-Potparević, Biljana, Daniels, Rolf, Savić, Snežana D., "Curcumin-loaded low-energy nanoemulsions as a prototype of multifunctional vehicles for different administration routes: Physicochemical and in vitro peculiarities important for dermal application" in International Journal of Pharmaceutics, 550, no. 1-2 (2018):333-346,
https://doi.org/10.1016/j.ijpharm.2018.08.060 . .

TY  - JOUR
AU  - Nikolić, Ines
AU  - Lunter, Dominique Jasmin
AU  - Randjelović, Danijela
AU  - Žugić, Ana
AU  - Tadić, Vanja
AU  - Marković, Bojan D.
AU  - Cekic, Nebojsa
AU  - Živković, Lada
AU  - Topalovic, Dijana
AU  - Spremo-Potparević, Biljana
AU  - Daniels, Rolf
AU  - Savić, Snežana D.
PY  - 2018
UR  - https://cer.ihtm.bg.ac.rs/handle/123456789/2425
AB  - The objective of this work was to investigate and profoundly characterize low-energy nanoemulsions as multifunctional carriers, with slight reference to dermal administration. An evidence-based approach was offered for deepening the knowledge on their formation via spontaneous emulsification. Curcumin, a compound of natural origin, potentially powerful therapeutic, was chosen as a model API. Due to curcumin's demanding properties (instability, poor solubility, low permeability), its potentials remain unreached. Low-energy nanoemulsions were considered carriers capable of overcoming imposed obstacles. Formulation consisting of Polysorbate 80 and soybean lecithin as stabilizers (9:1, 10%), medium-chain triglycerides as the oil phase (10%) and ultrapure water was selected for curcumin incorporation in 3 different concentrations (1, 2 and 3 mg/mL). Physicochemical stability was demonstrated during 3 months of monitoring (mean droplet size: 111.3-146.8 nm; PDI  LT  0.2; pH: 4.73-5.73). Curcumin's release from developed vehicles followed Higuchi's kinetics. DPPH (IC50 = 0.1187 mg/ mL) and FRAP (1.19 +/- 0.02 mmol/g) assays confirmed that curcumin acts as a potent antioxidant through different mechanisms, with no alterations after incorporation in the formulation. High biocompatibility in line with antigenotoxic activity of curcumin-loaded formulations (protective and reparative) was estimated through Comet assay. A multidisciplinary approach is needed to fully characterize developed systems, directing them to more concrete application possibilities.
PB  - Elsevier
T2  - International Journal of Pharmaceutics
T1  - Curcumin-loaded low-energy nanoemulsions as a prototype of multifunctional vehicles for different administration routes: Physicochemical and in vitro peculiarities important for dermal application
VL  - 550
IS  - 1-2
SP  - 333
EP  - 346
DO  - 10.1016/j.ijpharm.2018.08.060
ER  - 

@article{
author = "Nikolić, Ines and Lunter, Dominique Jasmin and Randjelović, Danijela and Žugić, Ana and Tadić, Vanja and Marković, Bojan D. and Cekic, Nebojsa and Živković, Lada and Topalovic, Dijana and Spremo-Potparević, Biljana and Daniels, Rolf and Savić, Snežana D.",
year = "2018",
abstract = "The objective of this work was to investigate and profoundly characterize low-energy nanoemulsions as multifunctional carriers, with slight reference to dermal administration. An evidence-based approach was offered for deepening the knowledge on their formation via spontaneous emulsification. Curcumin, a compound of natural origin, potentially powerful therapeutic, was chosen as a model API. Due to curcumin's demanding properties (instability, poor solubility, low permeability), its potentials remain unreached. Low-energy nanoemulsions were considered carriers capable of overcoming imposed obstacles. Formulation consisting of Polysorbate 80 and soybean lecithin as stabilizers (9:1, 10%), medium-chain triglycerides as the oil phase (10%) and ultrapure water was selected for curcumin incorporation in 3 different concentrations (1, 2 and 3 mg/mL). Physicochemical stability was demonstrated during 3 months of monitoring (mean droplet size: 111.3-146.8 nm; PDI  LT  0.2; pH: 4.73-5.73). Curcumin's release from developed vehicles followed Higuchi's kinetics. DPPH (IC50 = 0.1187 mg/ mL) and FRAP (1.19 +/- 0.02 mmol/g) assays confirmed that curcumin acts as a potent antioxidant through different mechanisms, with no alterations after incorporation in the formulation. High biocompatibility in line with antigenotoxic activity of curcumin-loaded formulations (protective and reparative) was estimated through Comet assay. A multidisciplinary approach is needed to fully characterize developed systems, directing them to more concrete application possibilities.",
publisher = "Elsevier",
journal = "International Journal of Pharmaceutics",
title = "Curcumin-loaded low-energy nanoemulsions as a prototype of multifunctional vehicles for different administration routes: Physicochemical and in vitro peculiarities important for dermal application",
volume = "550",
number = "1-2",
pages = "333-346",
doi = "10.1016/j.ijpharm.2018.08.060"
}

Nikolić, I., Lunter, D. J., Randjelović, D., Žugić, A., Tadić, V., Marković, B. D., Cekic, N., Živković, L., Topalovic, D., Spremo-Potparević, B., Daniels, R.,& Savić, S. D.. (2018). Curcumin-loaded low-energy nanoemulsions as a prototype of multifunctional vehicles for different administration routes: Physicochemical and in vitro peculiarities important for dermal application. in International Journal of Pharmaceutics
Elsevier., 550(1-2), 333-346.
https://doi.org/10.1016/j.ijpharm.2018.08.060

Nikolić I, Lunter DJ, Randjelović D, Žugić A, Tadić V, Marković BD, Cekic N, Živković L, Topalovic D, Spremo-Potparević B, Daniels R, Savić SD. Curcumin-loaded low-energy nanoemulsions as a prototype of multifunctional vehicles for different administration routes: Physicochemical and in vitro peculiarities important for dermal application. in International Journal of Pharmaceutics. 2018;550(1-2):333-346.
doi:10.1016/j.ijpharm.2018.08.060 .

Nikolić, Ines, Lunter, Dominique Jasmin, Randjelović, Danijela, Žugić, Ana, Tadić, Vanja, Marković, Bojan D., Cekic, Nebojsa, Živković, Lada, Topalovic, Dijana, Spremo-Potparević, Biljana, Daniels, Rolf, Savić, Snežana D., "Curcumin-loaded low-energy nanoemulsions as a prototype of multifunctional vehicles for different administration routes: Physicochemical and in vitro peculiarities important for dermal application" in International Journal of Pharmaceutics, 550, no. 1-2 (2018):333-346,
https://doi.org/10.1016/j.ijpharm.2018.08.060 . .

TY  - JOUR
AU  - Romcevic, Nebojsa
AU  - Rudolf, Rebeka
AU  - Trajic, Jelena
AU  - Romcevic, Maja
AU  - Hadzic, Branka
AU  - Vasiljević-Radović, Dana
AU  - Anzel, Ivan
PY  - 2011
UR  - https://cer.ihtm.bg.ac.rs/handle/123456789/763
AB  - In this paper the results of optical properties investigations on plastically deformed copper are presented. The optical properties of the plastically deformed copper were studied using spectroscopic ellipsometry in the ultraviolet-visible (UV-VIS) range. Chemically pure copper was deformed by applying the Equal Channel Angular Pressing (ECAP) technique. During the last decade, equal-channel angular pressing procedure was used for the fabrication of ultrafine-grained metals and alloys. The plastic deformation of metallic materials leads to the production of bulk nano-scale structures with ultrafine grains and cross-sections, which remain about equal before and after deformation. The parameters of the sample were calculated using a two-film model together with the Bruggeman effective medium approximation.
PB  - Institute of Metals and Technology
T2  - Materiali in Tehnologije
T1  - Optical properties of plastically deformed copper: an ellipsometric study
VL  - 45
IS  - 5
SP  - 463
EP  - 465
UR  - https://hdl.handle.net/21.15107/rcub_cer_763
ER  - 

@article{
author = "Romcevic, Nebojsa and Rudolf, Rebeka and Trajic, Jelena and Romcevic, Maja and Hadzic, Branka and Vasiljević-Radović, Dana and Anzel, Ivan",
year = "2011",
abstract = "In this paper the results of optical properties investigations on plastically deformed copper are presented. The optical properties of the plastically deformed copper were studied using spectroscopic ellipsometry in the ultraviolet-visible (UV-VIS) range. Chemically pure copper was deformed by applying the Equal Channel Angular Pressing (ECAP) technique. During the last decade, equal-channel angular pressing procedure was used for the fabrication of ultrafine-grained metals and alloys. The plastic deformation of metallic materials leads to the production of bulk nano-scale structures with ultrafine grains and cross-sections, which remain about equal before and after deformation. The parameters of the sample were calculated using a two-film model together with the Bruggeman effective medium approximation.",
publisher = "Institute of Metals and Technology",
journal = "Materiali in Tehnologije",
title = "Optical properties of plastically deformed copper: an ellipsometric study",
volume = "45",
number = "5",
pages = "463-465",
url = "https://hdl.handle.net/21.15107/rcub_cer_763"
}

Romcevic, N., Rudolf, R., Trajic, J., Romcevic, M., Hadzic, B., Vasiljević-Radović, D.,& Anzel, I.. (2011). Optical properties of plastically deformed copper: an ellipsometric study. in Materiali in Tehnologije
Institute of Metals and Technology., 45(5), 463-465.
https://hdl.handle.net/21.15107/rcub_cer_763

Romcevic N, Rudolf R, Trajic J, Romcevic M, Hadzic B, Vasiljević-Radović D, Anzel I. Optical properties of plastically deformed copper: an ellipsometric study. in Materiali in Tehnologije. 2011;45(5):463-465.
https://hdl.handle.net/21.15107/rcub_cer_763 .

Romcevic, Nebojsa, Rudolf, Rebeka, Trajic, Jelena, Romcevic, Maja, Hadzic, Branka, Vasiljević-Radović, Dana, Anzel, Ivan, "Optical properties of plastically deformed copper: an ellipsometric study" in Materiali in Tehnologije, 45, no. 5 (2011):463-465,
https://hdl.handle.net/21.15107/rcub_cer_763 .