TY  - CONF
AU  - Volkov Husović, Tatjana
AU  - Simić, Marko
AU  - Martinović, Sanja
AU  - Vlahović, Milica
PY  - 2021
UR  - https://cer.ihtm.bg.ac.rs/handle/123456789/5945
AB  - The objectives and effects of refractory materials recycling, as well as the potential
industries from which waste refractories suitable for recycling can be collected, will be
discussed in this paper. After the end of its service life, the refractory material is usually
disposed of at industrial landfills or recycled. The main motive for the reuse of refractories is the
sustainable conservation of natural resources and environmental protection by reducing
CO2 emissions and industrial landfills, reducing landfill costs and users’ costs. The effects
achieved by refractory materials recycling are the cost savings of raw materials and disposal,
the improvement of the environment, the product line expansion, and consequently the
opportunities for products' placement in hitherto unknown and inaccessible markets, as well
as closer cooperation between users and suppliers. Respecting recycling policies brings us
closer to the concept of zero waste.
PB  - Association for Promotion of Holistic Approach to Environment
C3  - Proceedings book - 2nd International Conference „The Holistic Approach to Environment“, May 28th, 2021, Virtual conference
T1  - Recycling refractories for steelmaking processes
SP  - 642
EP  - 652
UR  - https://hdl.handle.net/21.15107/rcub_cer_5945
ER  - 

@conference{
author = "Volkov Husović, Tatjana and Simić, Marko and Martinović, Sanja and Vlahović, Milica",
year = "2021",
abstract = "The objectives and effects of refractory materials recycling, as well as the potential
industries from which waste refractories suitable for recycling can be collected, will be
discussed in this paper. After the end of its service life, the refractory material is usually
disposed of at industrial landfills or recycled. The main motive for the reuse of refractories is the
sustainable conservation of natural resources and environmental protection by reducing
CO2 emissions and industrial landfills, reducing landfill costs and users’ costs. The effects
achieved by refractory materials recycling are the cost savings of raw materials and disposal,
the improvement of the environment, the product line expansion, and consequently the
opportunities for products' placement in hitherto unknown and inaccessible markets, as well
as closer cooperation between users and suppliers. Respecting recycling policies brings us
closer to the concept of zero waste.",
publisher = "Association for Promotion of Holistic Approach to Environment",
journal = "Proceedings book - 2nd International Conference „The Holistic Approach to Environment“, May 28th, 2021, Virtual conference",
title = "Recycling refractories for steelmaking processes",
pages = "642-652",
url = "https://hdl.handle.net/21.15107/rcub_cer_5945"
}

Volkov Husović, T., Simić, M., Martinović, S.,& Vlahović, M.. (2021). Recycling refractories for steelmaking processes. in Proceedings book - 2nd International Conference „The Holistic Approach to Environment“, May 28th, 2021, Virtual conference
Association for Promotion of Holistic Approach to Environment., 642-652.
https://hdl.handle.net/21.15107/rcub_cer_5945

Volkov Husović T, Simić M, Martinović S, Vlahović M. Recycling refractories for steelmaking processes. in Proceedings book - 2nd International Conference „The Holistic Approach to Environment“, May 28th, 2021, Virtual conference. 2021;:642-652.
https://hdl.handle.net/21.15107/rcub_cer_5945 .

Volkov Husović, Tatjana, Simić, Marko, Martinović, Sanja, Vlahović, Milica, "Recycling refractories for steelmaking processes" in Proceedings book - 2nd International Conference „The Holistic Approach to Environment“, May 28th, 2021, Virtual conference (2021):642-652,
https://hdl.handle.net/21.15107/rcub_cer_5945 .

TY  - JOUR
AU  - Savić, Aleksandar R.
AU  - Martinović, Sanja
AU  - Vlahović, Milica
AU  - Volkov Husović, Tatjana
PY  - 2020
UR  - https://cer.ihtm.bg.ac.rs/handle/123456789/3763
AB  - Self-compacting concrete (SCC) contains fine mineral fillers such as limestone powder. The idea of this study was to partially replace limestone with waste sulfur since it is hydrophobic, insoluble in water and therefore chemically inert and to compare the properties of produced concrete samples. Fresh concrete properties included: slump-flow, t500, V-funnel time, L-box ratio, segregation ratio, density, and entrained air content. Hardened concrete was tested for compressive, flexural and bond strengths, ultrasonic velocity, dynamic elasticity modulus, dynamic Poisson’s ratio, and microstructure. Flowability and segregation increased, while bulk density, compressive and flexural strength, dynamic elasticity modulus and ultrasonic velocity slight declined. Times t500 and V-funnel time, L-box ratio and entrained air changed insignificantly. Considering that all properties should remain or improve in case of waste valorization and the criteria should set to satisfy requirements for SCC, this study proved that all mixtures can be used for structural applications.
AB  - Efectos del contenido de residuos de azufre en las propiedades del hormigón autocompactante. El 
hormigón autocompactante (SCC, del inglés Self-compacting concrete) contiene cargas (fillers) minerales finas como polvo de piedra caliza. La idea de este estudio fue reemplazar parcialmente la piedra caliza por contenido de residuos de azufre, ya que es hidrófobo, insoluble en agua y, por lo tanto, químicamente inerte, y comparar las propiedades de las muestras de hormigón producidas. Las propiedades analizadas en el hormigón fresco 
incluyeron: flujo de asentamiento, t500, tiempo del embudo en V (V-funnel time), relación de caja en L (L-box ratio), relación de segregación, densidad y contenido de aire ocluido. En el hormigón endurecido se analizó la resistencia a compresión, flexión y adherencia, velocidad ultrasónica, módulo dinámico de elasticidad, coefi ciente dinámico de Poisson y microestructura. La fluidez y la segregación aumentaron, mientras que la densidad aparente (bulk density), la resistencia a la compresión y la flexión, el módulo de elasticidad dinámica y la velocidad ultrasónica disminuyeron ligeramente. Los tiempos t500 y el tiempo del embudo V, la relación de la caja L y el aire ocluido cambiaron de manera insignificante. Considerando que al valorizar residuos, se deben conseguir propiedades similares o mejoradas, y que los criterios deben establecerse para satisfacer los requisitos de SCC, este estudio demostró que todas las mezclas se pueden utilizar para aplicaciones estructurales.
PB  - Consejo Superior de Investigaciones Cientificas - CSIC
T2  - Materiales de Construccion
T1  - Effects of waste sulfur content on properties of self-compacting concrete
VL  - 70
IS  - 338
SP  - e216
DO  - 10.3989/mc.2020.06919
ER  - 

@article{
author = "Savić, Aleksandar R. and Martinović, Sanja and Vlahović, Milica and Volkov Husović, Tatjana",
year = "2020",
abstract = "Self-compacting concrete (SCC) contains fine mineral fillers such as limestone powder. The idea of this study was to partially replace limestone with waste sulfur since it is hydrophobic, insoluble in water and therefore chemically inert and to compare the properties of produced concrete samples. Fresh concrete properties included: slump-flow, t500, V-funnel time, L-box ratio, segregation ratio, density, and entrained air content. Hardened concrete was tested for compressive, flexural and bond strengths, ultrasonic velocity, dynamic elasticity modulus, dynamic Poisson’s ratio, and microstructure. Flowability and segregation increased, while bulk density, compressive and flexural strength, dynamic elasticity modulus and ultrasonic velocity slight declined. Times t500 and V-funnel time, L-box ratio and entrained air changed insignificantly. Considering that all properties should remain or improve in case of waste valorization and the criteria should set to satisfy requirements for SCC, this study proved that all mixtures can be used for structural applications., Efectos del contenido de residuos de azufre en las propiedades del hormigón autocompactante. El 
hormigón autocompactante (SCC, del inglés Self-compacting concrete) contiene cargas (fillers) minerales finas como polvo de piedra caliza. La idea de este estudio fue reemplazar parcialmente la piedra caliza por contenido de residuos de azufre, ya que es hidrófobo, insoluble en agua y, por lo tanto, químicamente inerte, y comparar las propiedades de las muestras de hormigón producidas. Las propiedades analizadas en el hormigón fresco 
incluyeron: flujo de asentamiento, t500, tiempo del embudo en V (V-funnel time), relación de caja en L (L-box ratio), relación de segregación, densidad y contenido de aire ocluido. En el hormigón endurecido se analizó la resistencia a compresión, flexión y adherencia, velocidad ultrasónica, módulo dinámico de elasticidad, coefi ciente dinámico de Poisson y microestructura. La fluidez y la segregación aumentaron, mientras que la densidad aparente (bulk density), la resistencia a la compresión y la flexión, el módulo de elasticidad dinámica y la velocidad ultrasónica disminuyeron ligeramente. Los tiempos t500 y el tiempo del embudo V, la relación de la caja L y el aire ocluido cambiaron de manera insignificante. Considerando que al valorizar residuos, se deben conseguir propiedades similares o mejoradas, y que los criterios deben establecerse para satisfacer los requisitos de SCC, este estudio demostró que todas las mezclas se pueden utilizar para aplicaciones estructurales.",
publisher = "Consejo Superior de Investigaciones Cientificas - CSIC",
journal = "Materiales de Construccion",
title = "Effects of waste sulfur content on properties of self-compacting concrete",
volume = "70",
number = "338",
pages = "e216",
doi = "10.3989/mc.2020.06919"
}

Savić, A. R., Martinović, S., Vlahović, M.,& Volkov Husović, T.. (2020). Effects of waste sulfur content on properties of self-compacting concrete. in Materiales de Construccion
Consejo Superior de Investigaciones Cientificas - CSIC., 70(338), e216.
https://doi.org/10.3989/mc.2020.06919

Savić AR, Martinović S, Vlahović M, Volkov Husović T. Effects of waste sulfur content on properties of self-compacting concrete. in Materiales de Construccion. 2020;70(338):e216.
doi:10.3989/mc.2020.06919 .

Savić, Aleksandar R., Martinović, Sanja, Vlahović, Milica, Volkov Husović, Tatjana, "Effects of waste sulfur content on properties of self-compacting concrete" in Materiales de Construccion, 70, no. 338 (2020):e216,
https://doi.org/10.3989/mc.2020.06919 . .

TY  - JOUR
AU  - Kazasidis, Marios
AU  - Yin, Shuo
AU  - Cassidy, Jonathan
AU  - Volkov-Husović, Tatjana
AU  - Vlahović, Milica
AU  - Martinović, Sanja
AU  - Kyriakopoulou, Elena
AU  - Lupoi, Rocco
PY  - 2020
UR  - https://cer.ihtm.bg.ac.rs/handle/123456789/3387
AB  - The cold spray technique was employed in this study to produce pure nickel (Ni) and nickel-Inconel 718 powder deposits on duplex stainless steel substrates. High quality coatings were manufactured using nitrogen as the propellant gas. The coatings exhibited satisfactory Inconel 718 (In718) retention within the Ni matrix due to the highly ductile binder phase necessary for fabrication. The characterization of the coating microstructures was implemented by means of X-ray diffraction, electron microscopy, energy-dispersive X-ray spectroscopy, and microhardness testing. In addition, the erosion resistance of both coatings was evaluated by performing cavitation erosion tests, with the analysis of the eroded surfaces revealing different erosion mechanisms for each coating. The results demonstrated the efficiency of the cold spray technique for use in the production of metal-metal matrix composite coatings and the potential of In718 use in applications which demand enhanced cavitation erosion resistance.
PB  - Elsevier
T2  - Surface and Coatings Technology
T1  - Microstructure and cavitation erosion performance of nickel-Inconel 718 composite coatings produced with cold spray
VL  - 382
SP  - 125195
DO  - 10.1016/j.surfcoat.2019.125195
ER  - 

@article{
author = "Kazasidis, Marios and Yin, Shuo and Cassidy, Jonathan and Volkov-Husović, Tatjana and Vlahović, Milica and Martinović, Sanja and Kyriakopoulou, Elena and Lupoi, Rocco",
year = "2020",
abstract = "The cold spray technique was employed in this study to produce pure nickel (Ni) and nickel-Inconel 718 powder deposits on duplex stainless steel substrates. High quality coatings were manufactured using nitrogen as the propellant gas. The coatings exhibited satisfactory Inconel 718 (In718) retention within the Ni matrix due to the highly ductile binder phase necessary for fabrication. The characterization of the coating microstructures was implemented by means of X-ray diffraction, electron microscopy, energy-dispersive X-ray spectroscopy, and microhardness testing. In addition, the erosion resistance of both coatings was evaluated by performing cavitation erosion tests, with the analysis of the eroded surfaces revealing different erosion mechanisms for each coating. The results demonstrated the efficiency of the cold spray technique for use in the production of metal-metal matrix composite coatings and the potential of In718 use in applications which demand enhanced cavitation erosion resistance.",
publisher = "Elsevier",
journal = "Surface and Coatings Technology",
title = "Microstructure and cavitation erosion performance of nickel-Inconel 718 composite coatings produced with cold spray",
volume = "382",
pages = "125195",
doi = "10.1016/j.surfcoat.2019.125195"
}

Kazasidis, M., Yin, S., Cassidy, J., Volkov-Husović, T., Vlahović, M., Martinović, S., Kyriakopoulou, E.,& Lupoi, R.. (2020). Microstructure and cavitation erosion performance of nickel-Inconel 718 composite coatings produced with cold spray. in Surface and Coatings Technology
Elsevier., 382, 125195.
https://doi.org/10.1016/j.surfcoat.2019.125195

Kazasidis M, Yin S, Cassidy J, Volkov-Husović T, Vlahović M, Martinović S, Kyriakopoulou E, Lupoi R. Microstructure and cavitation erosion performance of nickel-Inconel 718 composite coatings produced with cold spray. in Surface and Coatings Technology. 2020;382:125195.
doi:10.1016/j.surfcoat.2019.125195 .

Kazasidis, Marios, Yin, Shuo, Cassidy, Jonathan, Volkov-Husović, Tatjana, Vlahović, Milica, Martinović, Sanja, Kyriakopoulou, Elena, Lupoi, Rocco, "Microstructure and cavitation erosion performance of nickel-Inconel 718 composite coatings produced with cold spray" in Surface and Coatings Technology, 382 (2020):125195,
https://doi.org/10.1016/j.surfcoat.2019.125195 . .

TY  - JOUR
AU  - Kazasidis, Marios
AU  - Yin, Shuo
AU  - Cassidy, Jonathan
AU  - Volkov-Husović, Tatjana
AU  - Vlahović, Milica
AU  - Martinović, Sanja
AU  - Kyriakopoulou, Elena
AU  - Lupoi, Rocco
PY  - 2020
UR  - https://cer.ihtm.bg.ac.rs/handle/123456789/3274
AB  - The cold spray technique was employed in this study to produce pure nickel (Ni) and nickel-Inconel 718 powder deposits on duplex stainless steel substrates. High quality coatings were manufactured using nitrogen as the propellant gas. The coatings exhibited satisfactory Inconel 718 (In718) retention within the Ni matrix due to the highly ductile binder phase necessary for fabrication. The characterization of the coating microstructures was implemented by means of X-ray diffraction, electron microscopy, energy-dispersive X-ray spectroscopy, and microhardness testing. In addition, the erosion resistance of both coatings was evaluated by performing cavitation erosion tests, with the analysis of the eroded surfaces revealing different erosion mechanisms for each coating. The results demonstrated the efficiency of the cold spray technique for use in the production of metal-metal matrix composite coatings and the potential of In718 use in applications which demand enhanced cavitation erosion resistance.
PB  - Elsevier
T2  - Surface and Coatings Technology
T1  - Microstructure and cavitation erosion performance of nickel-Inconel 718 composite coatings produced with cold spray
VL  - 382
SP  - 125195
DO  - 10.1016/j.surfcoat.2019.125195
ER  - 

@article{
author = "Kazasidis, Marios and Yin, Shuo and Cassidy, Jonathan and Volkov-Husović, Tatjana and Vlahović, Milica and Martinović, Sanja and Kyriakopoulou, Elena and Lupoi, Rocco",
year = "2020",
abstract = "The cold spray technique was employed in this study to produce pure nickel (Ni) and nickel-Inconel 718 powder deposits on duplex stainless steel substrates. High quality coatings were manufactured using nitrogen as the propellant gas. The coatings exhibited satisfactory Inconel 718 (In718) retention within the Ni matrix due to the highly ductile binder phase necessary for fabrication. The characterization of the coating microstructures was implemented by means of X-ray diffraction, electron microscopy, energy-dispersive X-ray spectroscopy, and microhardness testing. In addition, the erosion resistance of both coatings was evaluated by performing cavitation erosion tests, with the analysis of the eroded surfaces revealing different erosion mechanisms for each coating. The results demonstrated the efficiency of the cold spray technique for use in the production of metal-metal matrix composite coatings and the potential of In718 use in applications which demand enhanced cavitation erosion resistance.",
publisher = "Elsevier",
journal = "Surface and Coatings Technology",
title = "Microstructure and cavitation erosion performance of nickel-Inconel 718 composite coatings produced with cold spray",
volume = "382",
pages = "125195",
doi = "10.1016/j.surfcoat.2019.125195"
}

Kazasidis, M., Yin, S., Cassidy, J., Volkov-Husović, T., Vlahović, M., Martinović, S., Kyriakopoulou, E.,& Lupoi, R.. (2020). Microstructure and cavitation erosion performance of nickel-Inconel 718 composite coatings produced with cold spray. in Surface and Coatings Technology
Elsevier., 382, 125195.
https://doi.org/10.1016/j.surfcoat.2019.125195

Kazasidis M, Yin S, Cassidy J, Volkov-Husović T, Vlahović M, Martinović S, Kyriakopoulou E, Lupoi R. Microstructure and cavitation erosion performance of nickel-Inconel 718 composite coatings produced with cold spray. in Surface and Coatings Technology. 2020;382:125195.
doi:10.1016/j.surfcoat.2019.125195 .

Kazasidis, Marios, Yin, Shuo, Cassidy, Jonathan, Volkov-Husović, Tatjana, Vlahović, Milica, Martinović, Sanja, Kyriakopoulou, Elena, Lupoi, Rocco, "Microstructure and cavitation erosion performance of nickel-Inconel 718 composite coatings produced with cold spray" in Surface and Coatings Technology, 382 (2020):125195,
https://doi.org/10.1016/j.surfcoat.2019.125195 . .

TY  - CONF
AU  - Vlahović, Milica
AU  - Martinović, Sanja
AU  - Stević, Zoran
AU  - Savić, Aleksandar R.
AU  - Volkov Husović, Tatjana
PY  - 2019
UR  - https://cer.ihtm.bg.ac.rs/handle/123456789/5948
AB  - Establishing a wind park presents a complex enterprise, which involves numerous activities, often impossible to synchronize and drive into the appropriate time-frame. Therefore, in some cases, based on reasonable suspicion, a concern rises regarding the quality of already built components of structures. In such cases, the launch of suitable assessment procedures is required. Stand-ards then define proper methods of in-situ assessment of concrete quality. Statistical methods are implemented in the analysis of the concrete components following the strict rules which, if executed correctly by the well-trained personnel of accredited institutions, provide exact and valid insight in the situation. This paper aspires to describe such procedure on the basis of thorough in-situ investigation and subsequent analysis. In this study, a large number of 255 core samples were taken from 17 wind tower concrete structure elements – foundations (out of 57 wind towers in total), and the compressive strength of already placed concrete was evaluated based on this set of results. The compressive strength is proved to be a good parameter for evaluating other aspects of concrete quality, mechanical properties, and durability.
PB  - Beograd : Savez mašinskih i elektrotehničkih inženjera i tehničara Srbije - SMEITS
PB  - Beograd : Društvo za obnovljive izvore električne energije
C3  - Proceedings - 7th International Conference on Renewable Electrical Power Sources-MKOIEE, October 17–18, 2019, Belgrade, Serbia
T1  - Examining erosion resistance of ceramics for electrical engineering applications
SP  - 25
EP  - 30
UR  - https://hdl.handle.net/21.15107/rcub_cer_5948
ER  - 

@conference{
author = "Vlahović, Milica and Martinović, Sanja and Stević, Zoran and Savić, Aleksandar R. and Volkov Husović, Tatjana",
year = "2019",
abstract = "Establishing a wind park presents a complex enterprise, which involves numerous activities, often impossible to synchronize and drive into the appropriate time-frame. Therefore, in some cases, based on reasonable suspicion, a concern rises regarding the quality of already built components of structures. In such cases, the launch of suitable assessment procedures is required. Stand-ards then define proper methods of in-situ assessment of concrete quality. Statistical methods are implemented in the analysis of the concrete components following the strict rules which, if executed correctly by the well-trained personnel of accredited institutions, provide exact and valid insight in the situation. This paper aspires to describe such procedure on the basis of thorough in-situ investigation and subsequent analysis. In this study, a large number of 255 core samples were taken from 17 wind tower concrete structure elements – foundations (out of 57 wind towers in total), and the compressive strength of already placed concrete was evaluated based on this set of results. The compressive strength is proved to be a good parameter for evaluating other aspects of concrete quality, mechanical properties, and durability.",
publisher = "Beograd : Savez mašinskih i elektrotehničkih inženjera i tehničara Srbije - SMEITS, Beograd : Društvo za obnovljive izvore električne energije",
journal = "Proceedings - 7th International Conference on Renewable Electrical Power Sources-MKOIEE, October 17–18, 2019, Belgrade, Serbia",
title = "Examining erosion resistance of ceramics for electrical engineering applications",
pages = "25-30",
url = "https://hdl.handle.net/21.15107/rcub_cer_5948"
}

Vlahović, M., Martinović, S., Stević, Z., Savić, A. R.,& Volkov Husović, T.. (2019). Examining erosion resistance of ceramics for electrical engineering applications. in Proceedings - 7th International Conference on Renewable Electrical Power Sources-MKOIEE, October 17–18, 2019, Belgrade, Serbia
Beograd : Savez mašinskih i elektrotehničkih inženjera i tehničara Srbije - SMEITS., 25-30.
https://hdl.handle.net/21.15107/rcub_cer_5948

Vlahović M, Martinović S, Stević Z, Savić AR, Volkov Husović T. Examining erosion resistance of ceramics for electrical engineering applications. in Proceedings - 7th International Conference on Renewable Electrical Power Sources-MKOIEE, October 17–18, 2019, Belgrade, Serbia. 2019;:25-30.
https://hdl.handle.net/21.15107/rcub_cer_5948 .

Vlahović, Milica, Martinović, Sanja, Stević, Zoran, Savić, Aleksandar R., Volkov Husović, Tatjana, "Examining erosion resistance of ceramics for electrical engineering applications" in Proceedings - 7th International Conference on Renewable Electrical Power Sources-MKOIEE, October 17–18, 2019, Belgrade, Serbia (2019):25-30,
https://hdl.handle.net/21.15107/rcub_cer_5948 .

TY  - CONF
AU  - Savić, Aleksandar R.
AU  - Stević, Zoran
AU  - Martinović, Sanja
AU  - Vlahović, Milica
AU  - Volkov Husović, Tatjana
PY  - 2019
UR  - https://cer.ihtm.bg.ac.rs/handle/123456789/5947
AB  - In this research, two non-destructive testing (NDT) methods, thermal vision analysis and image analysis, were implemented for monitoring the surface changes- erosion of mullite-based ceramic samples in conditions of cavitation exposure. Thermal imaging analysis was focused on determining the temperature line profile at the end of the cavitation experiment. Image analysis is a powerful tool for the quantification of degradation level caused by different impacts and conditions. Based on the results of the image analysis, the degradation level during the testing was determined, as well as number of formed pits with their characteristics (average diameter and area). The results performed by both methods were discussed in order to obtain the optimal procedure that should be followed for estimating degradation caused by cavitation erosion.
PB  - Beograd : Savez mašinskih i elektrotehničkih inženjera i tehničara Srbije - SMEITS
PB  - Beograd : Društvo za obnovljive izvore električne energije
C3  - Proceedings - 7th International Conference on Renewable Electrical Power Sources-MKOIEE, October 17–18, 2019, Belgrade, Serbia
T1  - Quantitative and qualitative analysis of concrete elements in wind park
SP  - 15
EP  - 24
UR  - https://hdl.handle.net/21.15107/rcub_cer_5947
ER  - 

@conference{
author = "Savić, Aleksandar R. and Stević, Zoran and Martinović, Sanja and Vlahović, Milica and Volkov Husović, Tatjana",
year = "2019",
abstract = "In this research, two non-destructive testing (NDT) methods, thermal vision analysis and image analysis, were implemented for monitoring the surface changes- erosion of mullite-based ceramic samples in conditions of cavitation exposure. Thermal imaging analysis was focused on determining the temperature line profile at the end of the cavitation experiment. Image analysis is a powerful tool for the quantification of degradation level caused by different impacts and conditions. Based on the results of the image analysis, the degradation level during the testing was determined, as well as number of formed pits with their characteristics (average diameter and area). The results performed by both methods were discussed in order to obtain the optimal procedure that should be followed for estimating degradation caused by cavitation erosion.",
publisher = "Beograd : Savez mašinskih i elektrotehničkih inženjera i tehničara Srbije - SMEITS, Beograd : Društvo za obnovljive izvore električne energije",
journal = "Proceedings - 7th International Conference on Renewable Electrical Power Sources-MKOIEE, October 17–18, 2019, Belgrade, Serbia",
title = "Quantitative and qualitative analysis of concrete elements in wind park",
pages = "15-24",
url = "https://hdl.handle.net/21.15107/rcub_cer_5947"
}

Savić, A. R., Stević, Z., Martinović, S., Vlahović, M.,& Volkov Husović, T.. (2019). Quantitative and qualitative analysis of concrete elements in wind park. in Proceedings - 7th International Conference on Renewable Electrical Power Sources-MKOIEE, October 17–18, 2019, Belgrade, Serbia
Beograd : Savez mašinskih i elektrotehničkih inženjera i tehničara Srbije - SMEITS., 15-24.
https://hdl.handle.net/21.15107/rcub_cer_5947

Savić AR, Stević Z, Martinović S, Vlahović M, Volkov Husović T. Quantitative and qualitative analysis of concrete elements in wind park. in Proceedings - 7th International Conference on Renewable Electrical Power Sources-MKOIEE, October 17–18, 2019, Belgrade, Serbia. 2019;:15-24.
https://hdl.handle.net/21.15107/rcub_cer_5947 .

Savić, Aleksandar R., Stević, Zoran, Martinović, Sanja, Vlahović, Milica, Volkov Husović, Tatjana, "Quantitative and qualitative analysis of concrete elements in wind park" in Proceedings - 7th International Conference on Renewable Electrical Power Sources-MKOIEE, October 17–18, 2019, Belgrade, Serbia (2019):15-24,
https://hdl.handle.net/21.15107/rcub_cer_5947 .

TY  - CONF
AU  - Avdalović, Jelena
AU  - Tešić, Olivera
AU  - Dojčinović, Biljana
AU  - Conić, V.
AU  - Lopičić, Zorica
AU  - Miletić, Srđan
AU  - Vrvić, Miroslav
PY  - 2019
UR  - https://cer.ihtm.bg.ac.rs/handle/123456789/5468
AB  - The object of this study was to investigate the possibility of copper and zinc leaching from polymetallic sulphide ore from the Bobija deposit (Western Serbia) by Acidithiobacillus sp.B2. Iron-oxidizing Acidithiobacillus sp. B2 was isolated from copper sulphide mine wastewater (Lake Robule) in Bor, Serbia. The bacterium was identified by 16SrDNA oligonuckotide sequence. Leaching experiment by the shake flask testing technique was performed during a period of four weeks ata temperature of 28 °C. The percentage of Cu and Zn leached at the end of this experiment was 65% and 67% respectively. This study shows that iron-oxidizing Acidithiobacillus sp. B2 can have a very important role in the extraction of copper and zinc, from polymetallic sulphide ore from the Bobija deposit.
PB  - University of Belgrade, Technical Faculty in Bor
C3  - Proceedings - 51st International October Conference on Mining and Metallurgy, October 16-19, Bor, Serbia
T1  - Microbial solubilization of copper and zinc from polymetallic sulphide ore
SP  - 73
EP  - 76
UR  - https://hdl.handle.net/21.15107/rcub_cer_5468
ER  - 

@conference{
author = "Avdalović, Jelena and Tešić, Olivera and Dojčinović, Biljana and Conić, V. and Lopičić, Zorica and Miletić, Srđan and Vrvić, Miroslav",
year = "2019",
abstract = "The object of this study was to investigate the possibility of copper and zinc leaching from polymetallic sulphide ore from the Bobija deposit (Western Serbia) by Acidithiobacillus sp.B2. Iron-oxidizing Acidithiobacillus sp. B2 was isolated from copper sulphide mine wastewater (Lake Robule) in Bor, Serbia. The bacterium was identified by 16SrDNA oligonuckotide sequence. Leaching experiment by the shake flask testing technique was performed during a period of four weeks ata temperature of 28 °C. The percentage of Cu and Zn leached at the end of this experiment was 65% and 67% respectively. This study shows that iron-oxidizing Acidithiobacillus sp. B2 can have a very important role in the extraction of copper and zinc, from polymetallic sulphide ore from the Bobija deposit.",
publisher = "University of Belgrade, Technical Faculty in Bor",
journal = "Proceedings - 51st International October Conference on Mining and Metallurgy, October 16-19, Bor, Serbia",
title = "Microbial solubilization of copper and zinc from polymetallic sulphide ore",
pages = "73-76",
url = "https://hdl.handle.net/21.15107/rcub_cer_5468"
}

Avdalović, J., Tešić, O., Dojčinović, B., Conić, V., Lopičić, Z., Miletić, S.,& Vrvić, M.. (2019). Microbial solubilization of copper and zinc from polymetallic sulphide ore. in Proceedings - 51st International October Conference on Mining and Metallurgy, October 16-19, Bor, Serbia
University of Belgrade, Technical Faculty in Bor., 73-76.
https://hdl.handle.net/21.15107/rcub_cer_5468

Avdalović J, Tešić O, Dojčinović B, Conić V, Lopičić Z, Miletić S, Vrvić M. Microbial solubilization of copper and zinc from polymetallic sulphide ore. in Proceedings - 51st International October Conference on Mining and Metallurgy, October 16-19, Bor, Serbia. 2019;:73-76.
https://hdl.handle.net/21.15107/rcub_cer_5468 .

Avdalović, Jelena, Tešić, Olivera, Dojčinović, Biljana, Conić, V., Lopičić, Zorica, Miletić, Srđan, Vrvić, Miroslav, "Microbial solubilization of copper and zinc from polymetallic sulphide ore" in Proceedings - 51st International October Conference on Mining and Metallurgy, October 16-19, Bor, Serbia (2019):73-76,
https://hdl.handle.net/21.15107/rcub_cer_5468 .

TY  - CHAP
AU  - Vlahović, Milica
AU  - Martinović, Sanja
AU  - Volkov Husović, Tatjana
PY  - 2019
UR  - https://novapublishers.com/shop/advances-in-chemistry-research-volume-58/
UR  - https://cer.ihtm.bg.ac.rs/handle/123456789/5955
AB  - Refractory castables, like all ceramic materials, contain numerous structural defects in the form of flaws, pores, microcracks, and impurities. These materials are often used in conditions of exposure to sudden and cyclical temperature changes, that is, to thermal shock. Such conditions can cause the creation of cracks in the material structure. Namely, the formation of new microcracks and the growth of those that already existed take place as a consequence of thermal shock. The decrease of mechanical strength as well as a general weakening and degradation of the material are also happening. This research evaluates the effects of thermal shock on high alumina low cement castable. The synthesized samples of one castable composition, based on alumina as an aggregate and calcium-aluminate cement, with the same cure conditions, were sintered at three different temperatures (1100°C, 1300°C, and 1600°C) with a dwell time of 3 hours. A water quench test was applied as an experimental method for thermal shock resistance testing. Morphological analysis of the samples before and during the testing was done. The changes in the material during thermal shock testing were monitored by destructive and non-destructive methods. Image analysis of the photographs of the samples' surfaces and SEM microphotographs of the sample cross-sections were applied to monitor degradation at the surface and inside the bulk. Ultrasonic measurements were used for monitoring internal degradation and elastic properties. Both non-destructive methods also served for homogeneity analysis. Overall material degradation was determined by measuring the mechanical strength of the samples using a classic method according to the standardized procedure. According to the results of performed experiments and analyses, it is evident that during the thermal shock, the surface and interior of the samples sintered at 1600°C behave differently compared with those sintered at 1100°C and 1300°C. The investigations have revealed that all three series of the obtained alumina-based refractory castables displayed high resistance to thermal shock since they withstood more than 40 thermal shock cycles without cracking and with a level of degradation below 50%, even under 25%. The samples sintered at 1300°C exhibited the best thermal shock resistance with more than 110 cycles without cracking. This behavior recommends that all three series of high alumina low cement castables can be effectively used in conditions that require good thermal stability.
PB  - Nova Science
T2  - Advances in Chemistry Research
T1  - Investigation of thermal shock resistance in alumina based refractory castables
VL  - 58
SP  - 183
EP  - 241
UR  - https://hdl.handle.net/21.15107/rcub_cer_5955
ER  - 

@inbook{
author = "Vlahović, Milica and Martinović, Sanja and Volkov Husović, Tatjana",
year = "2019",
abstract = "Refractory castables, like all ceramic materials, contain numerous structural defects in the form of flaws, pores, microcracks, and impurities. These materials are often used in conditions of exposure to sudden and cyclical temperature changes, that is, to thermal shock. Such conditions can cause the creation of cracks in the material structure. Namely, the formation of new microcracks and the growth of those that already existed take place as a consequence of thermal shock. The decrease of mechanical strength as well as a general weakening and degradation of the material are also happening. This research evaluates the effects of thermal shock on high alumina low cement castable. The synthesized samples of one castable composition, based on alumina as an aggregate and calcium-aluminate cement, with the same cure conditions, were sintered at three different temperatures (1100°C, 1300°C, and 1600°C) with a dwell time of 3 hours. A water quench test was applied as an experimental method for thermal shock resistance testing. Morphological analysis of the samples before and during the testing was done. The changes in the material during thermal shock testing were monitored by destructive and non-destructive methods. Image analysis of the photographs of the samples' surfaces and SEM microphotographs of the sample cross-sections were applied to monitor degradation at the surface and inside the bulk. Ultrasonic measurements were used for monitoring internal degradation and elastic properties. Both non-destructive methods also served for homogeneity analysis. Overall material degradation was determined by measuring the mechanical strength of the samples using a classic method according to the standardized procedure. According to the results of performed experiments and analyses, it is evident that during the thermal shock, the surface and interior of the samples sintered at 1600°C behave differently compared with those sintered at 1100°C and 1300°C. The investigations have revealed that all three series of the obtained alumina-based refractory castables displayed high resistance to thermal shock since they withstood more than 40 thermal shock cycles without cracking and with a level of degradation below 50%, even under 25%. The samples sintered at 1300°C exhibited the best thermal shock resistance with more than 110 cycles without cracking. This behavior recommends that all three series of high alumina low cement castables can be effectively used in conditions that require good thermal stability.",
publisher = "Nova Science",
journal = "Advances in Chemistry Research",
booktitle = "Investigation of thermal shock resistance in alumina based refractory castables",
volume = "58",
pages = "183-241",
url = "https://hdl.handle.net/21.15107/rcub_cer_5955"
}

Vlahović, M., Martinović, S.,& Volkov Husović, T.. (2019). Investigation of thermal shock resistance in alumina based refractory castables. in Advances in Chemistry Research
Nova Science., 58, 183-241.
https://hdl.handle.net/21.15107/rcub_cer_5955

Vlahović M, Martinović S, Volkov Husović T. Investigation of thermal shock resistance in alumina based refractory castables. in Advances in Chemistry Research. 2019;58:183-241.
https://hdl.handle.net/21.15107/rcub_cer_5955 .

Vlahović, Milica, Martinović, Sanja, Volkov Husović, Tatjana, "Investigation of thermal shock resistance in alumina based refractory castables" in Advances in Chemistry Research, 58 (2019):183-241,
https://hdl.handle.net/21.15107/rcub_cer_5955 .

TY  - CONF
AU  - Milićević, Sonja
AU  - Kragović, Milan
AU  - Milošević, Vladan
AU  - Martinović, Sanja
AU  - Čarapić, Jelena
PY  - 2019
UR  - https://cer.ihtm.bg.ac.rs/handle/123456789/5950
AB  - The increasing levels of industrial wastewater that are released to the environment present a serious threat to human health, living resources, and ecological systems. Zeolites tested for removal of Cu+2 from contaminated water in two different systems, batch and fixed-bed. Experiments were performed for wide range of initial concentrations of Cu 50-300 mg dm-3. Under applied experimental conditions, both systems manifest satisfying removal efficiency. Obtained adsorption capacities for the copper removal from the solution with the initial Cu concentration of 300 mg dm-3 were 7.52 and 12.19 mg mg-1 for batched and fixed-bed system, respectively.
PB  - Belgrade, Serbia : University of Belgrade - Faculty of Mining and Geology
C3  - Proceedings - 7th International Symposium Mining and Environmental Protection MEP-19, 25-28 September 2019, Vrdnik, Serbia
T1  - Copper removal capacity by zeolite: Comparation in a batch and fixed-bed system
SP  - 187
EP  - 191
UR  - https://hdl.handle.net/21.15107/rcub_cer_5950
ER  - 

@conference{
author = "Milićević, Sonja and Kragović, Milan and Milošević, Vladan and Martinović, Sanja and Čarapić, Jelena",
year = "2019",
abstract = "The increasing levels of industrial wastewater that are released to the environment present a serious threat to human health, living resources, and ecological systems. Zeolites tested for removal of Cu+2 from contaminated water in two different systems, batch and fixed-bed. Experiments were performed for wide range of initial concentrations of Cu 50-300 mg dm-3. Under applied experimental conditions, both systems manifest satisfying removal efficiency. Obtained adsorption capacities for the copper removal from the solution with the initial Cu concentration of 300 mg dm-3 were 7.52 and 12.19 mg mg-1 for batched and fixed-bed system, respectively.",
publisher = "Belgrade, Serbia : University of Belgrade - Faculty of Mining and Geology",
journal = "Proceedings - 7th International Symposium Mining and Environmental Protection MEP-19, 25-28 September 2019, Vrdnik, Serbia",
title = "Copper removal capacity by zeolite: Comparation in a batch and fixed-bed system",
pages = "187-191",
url = "https://hdl.handle.net/21.15107/rcub_cer_5950"
}

Milićević, S., Kragović, M., Milošević, V., Martinović, S.,& Čarapić, J.. (2019). Copper removal capacity by zeolite: Comparation in a batch and fixed-bed system. in Proceedings - 7th International Symposium Mining and Environmental Protection MEP-19, 25-28 September 2019, Vrdnik, Serbia
Belgrade, Serbia : University of Belgrade - Faculty of Mining and Geology., 187-191.
https://hdl.handle.net/21.15107/rcub_cer_5950

Milićević S, Kragović M, Milošević V, Martinović S, Čarapić J. Copper removal capacity by zeolite: Comparation in a batch and fixed-bed system. in Proceedings - 7th International Symposium Mining and Environmental Protection MEP-19, 25-28 September 2019, Vrdnik, Serbia. 2019;:187-191.
https://hdl.handle.net/21.15107/rcub_cer_5950 .

Milićević, Sonja, Kragović, Milan, Milošević, Vladan, Martinović, Sanja, Čarapić, Jelena, "Copper removal capacity by zeolite: Comparation in a batch and fixed-bed system" in Proceedings - 7th International Symposium Mining and Environmental Protection MEP-19, 25-28 September 2019, Vrdnik, Serbia (2019):187-191,
https://hdl.handle.net/21.15107/rcub_cer_5950 .

TY  - CONF
AU  - Milićević, Sonja
AU  - Martinović, Sanja
AU  - Jovanović, Vladimir
AU  - Vlahović, Milica
AU  - Kanari, Ndue
AU  - Popović, Ana
AU  - Kojić, Marija
PY  - 2019
UR  - https://cer.ihtm.bg.ac.rs/handle/123456789/5949
AB  - This paper covers the results of pelletizing fly ash in order to obtain pellets, with satisfied mechanical properties, that can be used in wastewater treatments. Serbian fly ash from
“Nikola Tesla” power plant was used as a low cost sorbent. Fly ash was subjected to elementary
and XRD analysis. Portland cement was used as a pelletizing agent along with the plastification agent. The mechanical properties of pellets were investigated using different methods such as: pressure resistance, impact resistance, resistance to abrasion, and disintegration in water. The best results were obtained with the addition of 10 % of cement along with the plasticizer.
PB  - University of Belgrade, Technical Faculty Bor
C3  - Proceedings - XIII International Mineral Processing and Recycling Conference, May 8-10, 2019, Belgrade, Serbia
T1  - Development and mechanical properties of the pelletized fly ash
SP  - 38
EP  - 44
UR  - https://hdl.handle.net/21.15107/rcub_cer_5949
ER  - 

@conference{
author = "Milićević, Sonja and Martinović, Sanja and Jovanović, Vladimir and Vlahović, Milica and Kanari, Ndue and Popović, Ana and Kojić, Marija",
year = "2019",
abstract = "This paper covers the results of pelletizing fly ash in order to obtain pellets, with satisfied mechanical properties, that can be used in wastewater treatments. Serbian fly ash from
“Nikola Tesla” power plant was used as a low cost sorbent. Fly ash was subjected to elementary
and XRD analysis. Portland cement was used as a pelletizing agent along with the plastification agent. The mechanical properties of pellets were investigated using different methods such as: pressure resistance, impact resistance, resistance to abrasion, and disintegration in water. The best results were obtained with the addition of 10 % of cement along with the plasticizer.",
publisher = "University of Belgrade, Technical Faculty Bor",
journal = "Proceedings - XIII International Mineral Processing and Recycling Conference, May 8-10, 2019, Belgrade, Serbia",
title = "Development and mechanical properties of the pelletized fly ash",
pages = "38-44",
url = "https://hdl.handle.net/21.15107/rcub_cer_5949"
}

Milićević, S., Martinović, S., Jovanović, V., Vlahović, M., Kanari, N., Popović, A.,& Kojić, M.. (2019). Development and mechanical properties of the pelletized fly ash. in Proceedings - XIII International Mineral Processing and Recycling Conference, May 8-10, 2019, Belgrade, Serbia
University of Belgrade, Technical Faculty Bor., 38-44.
https://hdl.handle.net/21.15107/rcub_cer_5949

Milićević S, Martinović S, Jovanović V, Vlahović M, Kanari N, Popović A, Kojić M. Development and mechanical properties of the pelletized fly ash. in Proceedings - XIII International Mineral Processing and Recycling Conference, May 8-10, 2019, Belgrade, Serbia. 2019;:38-44.
https://hdl.handle.net/21.15107/rcub_cer_5949 .

Milićević, Sonja, Martinović, Sanja, Jovanović, Vladimir, Vlahović, Milica, Kanari, Ndue, Popović, Ana, Kojić, Marija, "Development and mechanical properties of the pelletized fly ash" in Proceedings - XIII International Mineral Processing and Recycling Conference, May 8-10, 2019, Belgrade, Serbia (2019):38-44,
https://hdl.handle.net/21.15107/rcub_cer_5949 .

TY  - CONF
AU  - Volkov Husović, Tatjana
AU  - Martinović, Sanja
AU  - Vlahović, Milica
AU  - Savić, Aleksandar R.
AU  - Stević, Zoran
PY  - 2018
UR  - https://cer.ihtm.bg.ac.rs/handle/123456789/5951
AB  - The quantities of component materials used for production of concrete are high on the
global scale, therefore alternative materials are experimented on, in order to replace the
natural ones. The possibility of using ground waste sulfur from the oil refining (petroleum)
industry as a filling component of self-compacting concrete is presented in the paper, based
on common concrete laboratory tests. The physical and mechanical properties of selfcompacting
concrete decrease to some extend due to use of ground sulfur, but this concrete
remains useful for some building applications.
PB  - Association for Promotion of Holistic Approach to Environment
C3  - Proceedings book - 1st International Conference “The Holistic Approach to Environment”, 13-14 September, 2018, Sisak, Croatia
T1  - Possible use of ground sulfur as petroleum industry byproduct in self-compacting concrete production
SP  - 784
EP  - 791
UR  - https://hdl.handle.net/21.15107/rcub_cer_5951
ER  - 

@conference{
author = "Volkov Husović, Tatjana and Martinović, Sanja and Vlahović, Milica and Savić, Aleksandar R. and Stević, Zoran",
year = "2018",
abstract = "The quantities of component materials used for production of concrete are high on the
global scale, therefore alternative materials are experimented on, in order to replace the
natural ones. The possibility of using ground waste sulfur from the oil refining (petroleum)
industry as a filling component of self-compacting concrete is presented in the paper, based
on common concrete laboratory tests. The physical and mechanical properties of selfcompacting
concrete decrease to some extend due to use of ground sulfur, but this concrete
remains useful for some building applications.",
publisher = "Association for Promotion of Holistic Approach to Environment",
journal = "Proceedings book - 1st International Conference “The Holistic Approach to Environment”, 13-14 September, 2018, Sisak, Croatia",
title = "Possible use of ground sulfur as petroleum industry byproduct in self-compacting concrete production",
pages = "784-791",
url = "https://hdl.handle.net/21.15107/rcub_cer_5951"
}

Volkov Husović, T., Martinović, S., Vlahović, M., Savić, A. R.,& Stević, Z.. (2018). Possible use of ground sulfur as petroleum industry byproduct in self-compacting concrete production. in Proceedings book - 1st International Conference “The Holistic Approach to Environment”, 13-14 September, 2018, Sisak, Croatia
Association for Promotion of Holistic Approach to Environment., 784-791.
https://hdl.handle.net/21.15107/rcub_cer_5951

Volkov Husović T, Martinović S, Vlahović M, Savić AR, Stević Z. Possible use of ground sulfur as petroleum industry byproduct in self-compacting concrete production. in Proceedings book - 1st International Conference “The Holistic Approach to Environment”, 13-14 September, 2018, Sisak, Croatia. 2018;:784-791.
https://hdl.handle.net/21.15107/rcub_cer_5951 .

Volkov Husović, Tatjana, Martinović, Sanja, Vlahović, Milica, Savić, Aleksandar R., Stević, Zoran, "Possible use of ground sulfur as petroleum industry byproduct in self-compacting concrete production" in Proceedings book - 1st International Conference “The Holistic Approach to Environment”, 13-14 September, 2018, Sisak, Croatia (2018):784-791,
https://hdl.handle.net/21.15107/rcub_cer_5951 .

TY  - CONF
AU  - Vlahović, Milica
AU  - Martinović, Sanja
AU  - Savić, Aleksandar R.
AU  - Stević, Zoran
AU  - Volkov Husović, Tatjana
PY  - 2018
UR  - https://cer.ihtm.bg.ac.rs/handle/123456789/5952
AB  - Mainly due to the strict global environmental regulations regarding the oil and gas
refining processes, which limit the maximum quantity of sulfur in combustibles, the
availability of waste sulfur has been considerably growing during the last decades and it is
evident that there will be a continuous abundant supply of waste sulfur in the future. Finding
new ways for waste sulfur consumption thus becomes very important. In this research,
possibility of using waste sulfur as a binding agent in concrete was analyzed and the
properties of the obtained sulfur polymer concrete in aggressive environments were examined
using destructive and non-destructive testing methods. Compressive strength changes were
insignificant. Ultrasonic measurements indicated significant homogeneity changes and slight
internal degradation. Based on the obtained results, the material with satisfying quality for
possible application in corrosive environment was produced.
PB  - Association for Promotion of Holistic Approach to Environment
C3  - Proceedings book - 1st International Conference “The Holistic Approach to Environment”, 13-14 September, 2018, Sisak, Croatia
T1  - Reuse of waste sulfur as a binding agent in concrete
SP  - 776
EP  - 783
UR  - https://hdl.handle.net/21.15107/rcub_cer_5952
ER  - 

@conference{
author = "Vlahović, Milica and Martinović, Sanja and Savić, Aleksandar R. and Stević, Zoran and Volkov Husović, Tatjana",
year = "2018",
abstract = "Mainly due to the strict global environmental regulations regarding the oil and gas
refining processes, which limit the maximum quantity of sulfur in combustibles, the
availability of waste sulfur has been considerably growing during the last decades and it is
evident that there will be a continuous abundant supply of waste sulfur in the future. Finding
new ways for waste sulfur consumption thus becomes very important. In this research,
possibility of using waste sulfur as a binding agent in concrete was analyzed and the
properties of the obtained sulfur polymer concrete in aggressive environments were examined
using destructive and non-destructive testing methods. Compressive strength changes were
insignificant. Ultrasonic measurements indicated significant homogeneity changes and slight
internal degradation. Based on the obtained results, the material with satisfying quality for
possible application in corrosive environment was produced.",
publisher = "Association for Promotion of Holistic Approach to Environment",
journal = "Proceedings book - 1st International Conference “The Holistic Approach to Environment”, 13-14 September, 2018, Sisak, Croatia",
title = "Reuse of waste sulfur as a binding agent in concrete",
pages = "776-783",
url = "https://hdl.handle.net/21.15107/rcub_cer_5952"
}

Vlahović, M., Martinović, S., Savić, A. R., Stević, Z.,& Volkov Husović, T.. (2018). Reuse of waste sulfur as a binding agent in concrete. in Proceedings book - 1st International Conference “The Holistic Approach to Environment”, 13-14 September, 2018, Sisak, Croatia
Association for Promotion of Holistic Approach to Environment., 776-783.
https://hdl.handle.net/21.15107/rcub_cer_5952

Vlahović M, Martinović S, Savić AR, Stević Z, Volkov Husović T. Reuse of waste sulfur as a binding agent in concrete. in Proceedings book - 1st International Conference “The Holistic Approach to Environment”, 13-14 September, 2018, Sisak, Croatia. 2018;:776-783.
https://hdl.handle.net/21.15107/rcub_cer_5952 .

Vlahović, Milica, Martinović, Sanja, Savić, Aleksandar R., Stević, Zoran, Volkov Husović, Tatjana, "Reuse of waste sulfur as a binding agent in concrete" in Proceedings book - 1st International Conference “The Holistic Approach to Environment”, 13-14 September, 2018, Sisak, Croatia (2018):776-783,
https://hdl.handle.net/21.15107/rcub_cer_5952 .

TY  - CONF
AU  - Savić, Aleksandar R.
AU  - Martinović, Sanja
AU  - Vlahović, Milica
AU  - Stević, Zoran
AU  - Volkov Husović, Tatjana
PY  - 2018
UR  - https://cer.ihtm.bg.ac.rs/handle/123456789/5965
AB  - Self-compacting concrete (SCC) typically contains a certain content of very fine mineral fillers such as limestone powder. The idea of this study was to partially replace limestone with elemental waste sulfur since it is hydrophobic, insoluble in water and therefore chemically inert in concrete mixtures. Properties of conventional SCC with limestone and several compositions with different sulfur content were compared. Hardened concrete was tested for compressive, flexural, and adhesion strengths, dynamic elasticity modulus, specific electrical resistance, density, microstructure, and infra-red thermography. Results showed a slight decline in compressive, flexural, and adhesion strengths as well as in dynamic elasticity modulus. Specific electrical resistance and density were higher for samples with sulfur. SEM analysis indicated a slight porosity increase for the sample with sulfur. Infrared thermography was applied as a fast method for detecting internal deformations. Having in mind that all properties should remain or improve in case of waste valorization and the criteria should be set to satisfy requirements for SCC, this study proved that all mixtures can be used for certain structural applications.
PB  - Union of Mechanical and Electrical Engineers and Technicains of Serbia
PB  - Society for Renewable Electrical Power Sources
C3  - Proceedings - 6th International Conference on Renewable Electrical Power Sources-MKOIEE, October 11-12, 2018, Belgrade, Serbia
T1  - Valorization of waste sulfur in synthesis of eco-friendly self-compacting concrete
SP  - 221
EP  - 228
UR  - https://hdl.handle.net/21.15107/rcub_cer_5965
ER  - 

@conference{
author = "Savić, Aleksandar R. and Martinović, Sanja and Vlahović, Milica and Stević, Zoran and Volkov Husović, Tatjana",
year = "2018",
abstract = "Self-compacting concrete (SCC) typically contains a certain content of very fine mineral fillers such as limestone powder. The idea of this study was to partially replace limestone with elemental waste sulfur since it is hydrophobic, insoluble in water and therefore chemically inert in concrete mixtures. Properties of conventional SCC with limestone and several compositions with different sulfur content were compared. Hardened concrete was tested for compressive, flexural, and adhesion strengths, dynamic elasticity modulus, specific electrical resistance, density, microstructure, and infra-red thermography. Results showed a slight decline in compressive, flexural, and adhesion strengths as well as in dynamic elasticity modulus. Specific electrical resistance and density were higher for samples with sulfur. SEM analysis indicated a slight porosity increase for the sample with sulfur. Infrared thermography was applied as a fast method for detecting internal deformations. Having in mind that all properties should remain or improve in case of waste valorization and the criteria should be set to satisfy requirements for SCC, this study proved that all mixtures can be used for certain structural applications.",
publisher = "Union of Mechanical and Electrical Engineers and Technicains of Serbia, Society for Renewable Electrical Power Sources",
journal = "Proceedings - 6th International Conference on Renewable Electrical Power Sources-MKOIEE, October 11-12, 2018, Belgrade, Serbia",
title = "Valorization of waste sulfur in synthesis of eco-friendly self-compacting concrete",
pages = "221-228",
url = "https://hdl.handle.net/21.15107/rcub_cer_5965"
}

Savić, A. R., Martinović, S., Vlahović, M., Stević, Z.,& Volkov Husović, T.. (2018). Valorization of waste sulfur in synthesis of eco-friendly self-compacting concrete. in Proceedings - 6th International Conference on Renewable Electrical Power Sources-MKOIEE, October 11-12, 2018, Belgrade, Serbia
Union of Mechanical and Electrical Engineers and Technicains of Serbia., 221-228.
https://hdl.handle.net/21.15107/rcub_cer_5965

Savić AR, Martinović S, Vlahović M, Stević Z, Volkov Husović T. Valorization of waste sulfur in synthesis of eco-friendly self-compacting concrete. in Proceedings - 6th International Conference on Renewable Electrical Power Sources-MKOIEE, October 11-12, 2018, Belgrade, Serbia. 2018;:221-228.
https://hdl.handle.net/21.15107/rcub_cer_5965 .

Savić, Aleksandar R., Martinović, Sanja, Vlahović, Milica, Stević, Zoran, Volkov Husović, Tatjana, "Valorization of waste sulfur in synthesis of eco-friendly self-compacting concrete" in Proceedings - 6th International Conference on Renewable Electrical Power Sources-MKOIEE, October 11-12, 2018, Belgrade, Serbia (2018):221-228,
https://hdl.handle.net/21.15107/rcub_cer_5965 .

TY  - CONF
AU  - Majstorović, Jelena
AU  - Martinović, Sanja
AU  - Vlahović, Milica
AU  - Dojčinović, Marina
AU  - Pavlović, Marko
AU  - Volkov Husović, Tatjana
PY  - 2018
UR  - https://cer.ihtm.bg.ac.rs/handle/123456789/6012
AB  - Samples based on talc with 15 % of zeolite from Zlatokop, Serbia, sintered at 1200 ºC were prepared and tested in condition of cavitation erosion. The ultrasonic vibratory cavitation set up with a stationary specimen was used. Mass loss was measured and degradation level of the samples using image analysis and Young modulus of elasticity was monitored. Obtained results showed good resistance to the cavitation erosion giving the possibility of future application in different conditions where cavitation erosion is expected.
PB  - Bosnia and Herzegovina : University of Zenica,  Faculty of metallurgy and technology
C3  - Proceedings - 12th Scientific/Research Symposium With International Participation “Metallic and Nonmetallic Materials: Production-properties-application“, , April 19th – 20th 2018., Vlašić, Bosnia and Herzegovina
T1  - Cavitation of refractory samples based on talc and zeolite from Zlatokop
SP  - 230
EP  - 233
UR  - https://hdl.handle.net/21.15107/rcub_cer_6012
ER  - 

@conference{
author = "Majstorović, Jelena and Martinović, Sanja and Vlahović, Milica and Dojčinović, Marina and Pavlović, Marko and Volkov Husović, Tatjana",
year = "2018",
abstract = "Samples based on talc with 15 % of zeolite from Zlatokop, Serbia, sintered at 1200 ºC were prepared and tested in condition of cavitation erosion. The ultrasonic vibratory cavitation set up with a stationary specimen was used. Mass loss was measured and degradation level of the samples using image analysis and Young modulus of elasticity was monitored. Obtained results showed good resistance to the cavitation erosion giving the possibility of future application in different conditions where cavitation erosion is expected.",
publisher = "Bosnia and Herzegovina : University of Zenica,  Faculty of metallurgy and technology",
journal = "Proceedings - 12th Scientific/Research Symposium With International Participation “Metallic and Nonmetallic Materials: Production-properties-application“, , April 19th – 20th 2018., Vlašić, Bosnia and Herzegovina",
title = "Cavitation of refractory samples based on talc and zeolite from Zlatokop",
pages = "230-233",
url = "https://hdl.handle.net/21.15107/rcub_cer_6012"
}

Majstorović, J., Martinović, S., Vlahović, M., Dojčinović, M., Pavlović, M.,& Volkov Husović, T.. (2018). Cavitation of refractory samples based on talc and zeolite from Zlatokop. in Proceedings - 12th Scientific/Research Symposium With International Participation “Metallic and Nonmetallic Materials: Production-properties-application“, , April 19th – 20th 2018., Vlašić, Bosnia and Herzegovina
Bosnia and Herzegovina : University of Zenica,  Faculty of metallurgy and technology., 230-233.
https://hdl.handle.net/21.15107/rcub_cer_6012

Majstorović J, Martinović S, Vlahović M, Dojčinović M, Pavlović M, Volkov Husović T. Cavitation of refractory samples based on talc and zeolite from Zlatokop. in Proceedings - 12th Scientific/Research Symposium With International Participation “Metallic and Nonmetallic Materials: Production-properties-application“, , April 19th – 20th 2018., Vlašić, Bosnia and Herzegovina. 2018;:230-233.
https://hdl.handle.net/21.15107/rcub_cer_6012 .

Majstorović, Jelena, Martinović, Sanja, Vlahović, Milica, Dojčinović, Marina, Pavlović, Marko, Volkov Husović, Tatjana, "Cavitation of refractory samples based on talc and zeolite from Zlatokop" in Proceedings - 12th Scientific/Research Symposium With International Participation “Metallic and Nonmetallic Materials: Production-properties-application“, , April 19th – 20th 2018., Vlašić, Bosnia and Herzegovina (2018):230-233,
https://hdl.handle.net/21.15107/rcub_cer_6012 .

TY  - JOUR
AU  - Stević, Zoran
AU  - Vlahović, Milica
AU  - Martinović, Sanja
AU  - Dimitrijević, Stevan
AU  - Ponomaryova, Elena
AU  - Volkov-Husović, Tatjana
PY  - 2018
UR  - https://cer.ihtm.bg.ac.rs/handle/123456789/2409
AB  - Pulse-reverse power modes are used in galvanotechniques in order to obtain coatings with better characteristics in terms of gloss, adhesion, tracking sharp edges and uniform distribution of deposits on complex shape objects, compared with the coatings produced by constant current modes. Pulse-reverse modes also allow the use of a higher current density, and thus the production speed of electroplating cells increases. Systems for standard electroplating of copper, silver and gold are optimised by the suitable choice of duration and intensity of the pulses. It is shown that coatings with satisfactory quality can be deposited using higher current density, different modes of pulsed current in a very short period of time, without expensive and often dangerous additives in the electrolyte. Parameters of the model for certain electrochemical systems were determined by modelling and computer simulation, so the system behaviour under different circumstances becomes predictive.
PB  - De Gruyter
T2  - International Journal of Materials Research
T1  - Modelling, simulation and optimisation of pulse-reverse regime of copper, silver and gold electrodeposition
VL  - 109
IS  - 6
SP  - 514
EP  - 521
DO  - 10.3139/146.111636
ER  - 

@article{
author = "Stević, Zoran and Vlahović, Milica and Martinović, Sanja and Dimitrijević, Stevan and Ponomaryova, Elena and Volkov-Husović, Tatjana",
year = "2018",
abstract = "Pulse-reverse power modes are used in galvanotechniques in order to obtain coatings with better characteristics in terms of gloss, adhesion, tracking sharp edges and uniform distribution of deposits on complex shape objects, compared with the coatings produced by constant current modes. Pulse-reverse modes also allow the use of a higher current density, and thus the production speed of electroplating cells increases. Systems for standard electroplating of copper, silver and gold are optimised by the suitable choice of duration and intensity of the pulses. It is shown that coatings with satisfactory quality can be deposited using higher current density, different modes of pulsed current in a very short period of time, without expensive and often dangerous additives in the electrolyte. Parameters of the model for certain electrochemical systems were determined by modelling and computer simulation, so the system behaviour under different circumstances becomes predictive.",
publisher = "De Gruyter",
journal = "International Journal of Materials Research",
title = "Modelling, simulation and optimisation of pulse-reverse regime of copper, silver and gold electrodeposition",
volume = "109",
number = "6",
pages = "514-521",
doi = "10.3139/146.111636"
}

Stević, Z., Vlahović, M., Martinović, S., Dimitrijević, S., Ponomaryova, E.,& Volkov-Husović, T.. (2018). Modelling, simulation and optimisation of pulse-reverse regime of copper, silver and gold electrodeposition. in International Journal of Materials Research
De Gruyter., 109(6), 514-521.
https://doi.org/10.3139/146.111636

Stević Z, Vlahović M, Martinović S, Dimitrijević S, Ponomaryova E, Volkov-Husović T. Modelling, simulation and optimisation of pulse-reverse regime of copper, silver and gold electrodeposition. in International Journal of Materials Research. 2018;109(6):514-521.
doi:10.3139/146.111636 .

Stević, Zoran, Vlahović, Milica, Martinović, Sanja, Dimitrijević, Stevan, Ponomaryova, Elena, Volkov-Husović, Tatjana, "Modelling, simulation and optimisation of pulse-reverse regime of copper, silver and gold electrodeposition" in International Journal of Materials Research, 109, no. 6 (2018):514-521,
https://doi.org/10.3139/146.111636 . .

TY  - JOUR
AU  - Majstorović-Necković, Jelena B.
AU  - Pavlović, Marko D.
AU  - Dojčinović, Marina
AU  - Martinović, Sanja
AU  - Vlahović, Milica
AU  - Volkov-Husović, Tatjana
PY  - 2018
UR  - https://cer.ihtm.bg.ac.rs/handle/123456789/2281
AB  - Using domestic zeolite from Igroš as row material for ceramic samples for application in condition of cavitation erosion. Samples based on talc with 15 % of zeolite, from Igroš, sintered at 1200oC were used in this investigation. The ultrasonic vibratory cavitation set up with stacionary specimen was used. Mass loss was measured and degradation level of the samples using image analysis and Young modulus of elasticity. Obtained results showed good resistance of the sample to the cavitation erosion, which give the possibility for possible future application of ceramic samples based on talc and yeolite in different conditions where cavitation erosion is expected.
AB  - U radu su prezentirani rezultati istraživanja korišćenja domaćeg zeolita sa ležišta 'Igroš' za izradu keramičkih uzoraka i primenu u uslovima dejstva kavitacije. Za ispitivanja su korišćeni uzorci talka sa 15% zeolita iz domaćeg ležišta IGROŠ (Brus) sinterovani na 1200oC. Za određivanje otpornosti na dejstvo kavitacije korišćena je ultrazvučna vibraciona metoda sa stacionarnim uzorkom. Gubitak mase i nivo degradacije površine uzoraka praćeni su primenom analize slike i Jungovog modula elastičnosti. Rezultati ispitivanja pokazali su dobru otpornost keramike na dejstvo kavitacije na bazi talka i zeolita što ukazuje na mogućnost primene u različitim oblastima industrije gde se očekuje prisustvo razaranja pod dejstvom kavitacije.
PB  - Srbija : Savez inženjera i tehničara Srbije
T2  - Tehnika
T1  - Cavitation of refratory samples based on talc and domestic zeolite
T1  - Ispitivanje vatrostalnih uzoraka na bazi talka i domaćeg zeolita na dejstvo kavitacije
VL  - 73
IS  - 3
SP  - 364
EP  - 369
DO  - 10.5937/tehnika1803364M
ER  - 

@article{
author = "Majstorović-Necković, Jelena B. and Pavlović, Marko D. and Dojčinović, Marina and Martinović, Sanja and Vlahović, Milica and Volkov-Husović, Tatjana",
year = "2018",
abstract = "Using domestic zeolite from Igroš as row material for ceramic samples for application in condition of cavitation erosion. Samples based on talc with 15 % of zeolite, from Igroš, sintered at 1200oC were used in this investigation. The ultrasonic vibratory cavitation set up with stacionary specimen was used. Mass loss was measured and degradation level of the samples using image analysis and Young modulus of elasticity. Obtained results showed good resistance of the sample to the cavitation erosion, which give the possibility for possible future application of ceramic samples based on talc and yeolite in different conditions where cavitation erosion is expected., U radu su prezentirani rezultati istraživanja korišćenja domaćeg zeolita sa ležišta 'Igroš' za izradu keramičkih uzoraka i primenu u uslovima dejstva kavitacije. Za ispitivanja su korišćeni uzorci talka sa 15% zeolita iz domaćeg ležišta IGROŠ (Brus) sinterovani na 1200oC. Za određivanje otpornosti na dejstvo kavitacije korišćena je ultrazvučna vibraciona metoda sa stacionarnim uzorkom. Gubitak mase i nivo degradacije površine uzoraka praćeni su primenom analize slike i Jungovog modula elastičnosti. Rezultati ispitivanja pokazali su dobru otpornost keramike na dejstvo kavitacije na bazi talka i zeolita što ukazuje na mogućnost primene u različitim oblastima industrije gde se očekuje prisustvo razaranja pod dejstvom kavitacije.",
publisher = "Srbija : Savez inženjera i tehničara Srbije",
journal = "Tehnika",
title = "Cavitation of refratory samples based on talc and domestic zeolite, Ispitivanje vatrostalnih uzoraka na bazi talka i domaćeg zeolita na dejstvo kavitacije",
volume = "73",
number = "3",
pages = "364-369",
doi = "10.5937/tehnika1803364M"
}

Majstorović-Necković, J. B., Pavlović, M. D., Dojčinović, M., Martinović, S., Vlahović, M.,& Volkov-Husović, T.. (2018). Cavitation of refratory samples based on talc and domestic zeolite. in Tehnika
Srbija : Savez inženjera i tehničara Srbije., 73(3), 364-369.
https://doi.org/10.5937/tehnika1803364M

Majstorović-Necković JB, Pavlović MD, Dojčinović M, Martinović S, Vlahović M, Volkov-Husović T. Cavitation of refratory samples based on talc and domestic zeolite. in Tehnika. 2018;73(3):364-369.
doi:10.5937/tehnika1803364M .

Majstorović-Necković, Jelena B., Pavlović, Marko D., Dojčinović, Marina, Martinović, Sanja, Vlahović, Milica, Volkov-Husović, Tatjana, "Cavitation of refratory samples based on talc and domestic zeolite" in Tehnika, 73, no. 3 (2018):364-369,
https://doi.org/10.5937/tehnika1803364M . .

TY  - JOUR
AU  - Martinović, Sanja
AU  - Vlahović, Milica
AU  - Dojčinović, Marina
AU  - Pavlović, Marko
AU  - Volkov-Husović, Tatjana
PY  - 2018
UR  - https://cer.ihtm.bg.ac.rs/handle/123456789/2343
AB  - In this study the resistance of cordierite and zircon to the cavitation erosion was investigated with the aim of possible spreading their application. Cavitation erosion test was applied using standard ultrasonic vibratory set up with stationary sample. Weight loss and image analysis measurements including morphological analysis of the formed pits were used for monitoring degradation during the cavitation erosion testing. The obtained results were discussed in order to compare and analyze degradation mechanism and the resistance of the investigated materials to cavitation erosion. Cordierite sample underwent less serious degradation, characterized by continual forming of new pits, while zircon degradation progressed by growth and merging of already formed pits.
PB  - Elsevier
T2  - Materials Letters
T1  - Comparison of cavitation erosion behavior of cordierite and zircon based samples using image and morphological analyses
VL  - 220
SP  - 136
EP  - 139
DO  - 10.1016/j.matlet.2018.03.029
ER  - 

@article{
author = "Martinović, Sanja and Vlahović, Milica and Dojčinović, Marina and Pavlović, Marko and Volkov-Husović, Tatjana",
year = "2018",
abstract = "In this study the resistance of cordierite and zircon to the cavitation erosion was investigated with the aim of possible spreading their application. Cavitation erosion test was applied using standard ultrasonic vibratory set up with stationary sample. Weight loss and image analysis measurements including morphological analysis of the formed pits were used for monitoring degradation during the cavitation erosion testing. The obtained results were discussed in order to compare and analyze degradation mechanism and the resistance of the investigated materials to cavitation erosion. Cordierite sample underwent less serious degradation, characterized by continual forming of new pits, while zircon degradation progressed by growth and merging of already formed pits.",
publisher = "Elsevier",
journal = "Materials Letters",
title = "Comparison of cavitation erosion behavior of cordierite and zircon based samples using image and morphological analyses",
volume = "220",
pages = "136-139",
doi = "10.1016/j.matlet.2018.03.029"
}

Martinović, S., Vlahović, M., Dojčinović, M., Pavlović, M.,& Volkov-Husović, T.. (2018). Comparison of cavitation erosion behavior of cordierite and zircon based samples using image and morphological analyses. in Materials Letters
Elsevier., 220, 136-139.
https://doi.org/10.1016/j.matlet.2018.03.029

Martinović S, Vlahović M, Dojčinović M, Pavlović M, Volkov-Husović T. Comparison of cavitation erosion behavior of cordierite and zircon based samples using image and morphological analyses. in Materials Letters. 2018;220:136-139.
doi:10.1016/j.matlet.2018.03.029 .

Martinović, Sanja, Vlahović, Milica, Dojčinović, Marina, Pavlović, Marko, Volkov-Husović, Tatjana, "Comparison of cavitation erosion behavior of cordierite and zircon based samples using image and morphological analyses" in Materials Letters, 220 (2018):136-139,
https://doi.org/10.1016/j.matlet.2018.03.029 . .

TY  - CONF
AU  - Milićević, Sonja
AU  - Martinović, Sanja
AU  - Vlahović, Milica
AU  - Kanari, Ndue
AU  - Diot, Frederic
AU  - Popović, Ana
AU  - Kojić, Marija
AU  - Yvon, Jacque
PY  - 2018
UR  - https://cer.ihtm.bg.ac.rs/handle/123456789/5966
AB  - This study is occupied by using fly ash for copper removal from the acid mine wastewater and a synthetic solution of similar composition. Chemical analysis of mine wastewater proved that the values of Cu, Zn, Fe, and Mn exceed the maximum accepted concentration in a large extent. Serbian fly ash from the “Nikola Tesla” power plant was used as a low-cost sorbent for the removal of copper ions (Cu2+) from aqueous solutions. Fly ash was subjected to elementary and XRD analysis. As a method, a batch sorption procedure was applied. Sorption efficiency was studied as a function of the contact time, and amount of the sorbent. Equilibrium was determined after 90 min for all investigated sorbent dosages.
PB  - University of Belgrade, Technical Faculty in Bor
C3  - Proceedings - 26th International Conference Ecological Truth and Environmental Research-EcoTer 18, June 12-1, 2018, Borsko jezero, Serbia
T1  - Sorption of copper by fly ash
SP  - 332
EP  - 337
UR  - https://hdl.handle.net/21.15107/rcub_cer_5966
ER  - 

@conference{
author = "Milićević, Sonja and Martinović, Sanja and Vlahović, Milica and Kanari, Ndue and Diot, Frederic and Popović, Ana and Kojić, Marija and Yvon, Jacque",
year = "2018",
abstract = "This study is occupied by using fly ash for copper removal from the acid mine wastewater and a synthetic solution of similar composition. Chemical analysis of mine wastewater proved that the values of Cu, Zn, Fe, and Mn exceed the maximum accepted concentration in a large extent. Serbian fly ash from the “Nikola Tesla” power plant was used as a low-cost sorbent for the removal of copper ions (Cu2+) from aqueous solutions. Fly ash was subjected to elementary and XRD analysis. As a method, a batch sorption procedure was applied. Sorption efficiency was studied as a function of the contact time, and amount of the sorbent. Equilibrium was determined after 90 min for all investigated sorbent dosages.",
publisher = "University of Belgrade, Technical Faculty in Bor",
journal = "Proceedings - 26th International Conference Ecological Truth and Environmental Research-EcoTer 18, June 12-1, 2018, Borsko jezero, Serbia",
title = "Sorption of copper by fly ash",
pages = "332-337",
url = "https://hdl.handle.net/21.15107/rcub_cer_5966"
}

Milićević, S., Martinović, S., Vlahović, M., Kanari, N., Diot, F., Popović, A., Kojić, M.,& Yvon, J.. (2018). Sorption of copper by fly ash. in Proceedings - 26th International Conference Ecological Truth and Environmental Research-EcoTer 18, June 12-1, 2018, Borsko jezero, Serbia
University of Belgrade, Technical Faculty in Bor., 332-337.
https://hdl.handle.net/21.15107/rcub_cer_5966

Milićević S, Martinović S, Vlahović M, Kanari N, Diot F, Popović A, Kojić M, Yvon J. Sorption of copper by fly ash. in Proceedings - 26th International Conference Ecological Truth and Environmental Research-EcoTer 18, June 12-1, 2018, Borsko jezero, Serbia. 2018;:332-337.
https://hdl.handle.net/21.15107/rcub_cer_5966 .

Milićević, Sonja, Martinović, Sanja, Vlahović, Milica, Kanari, Ndue, Diot, Frederic, Popović, Ana, Kojić, Marija, Yvon, Jacque, "Sorption of copper by fly ash" in Proceedings - 26th International Conference Ecological Truth and Environmental Research-EcoTer 18, June 12-1, 2018, Borsko jezero, Serbia (2018):332-337,
https://hdl.handle.net/21.15107/rcub_cer_5966 .

TY  - JOUR
AU  - Milićević, Sonja
AU  - Martinović, Sanja
AU  - Milošević, Vladan
AU  - Stojanović, Jovica
AU  - Povrenović, Dragan
PY  - 2018
UR  - https://cer.ihtm.bg.ac.rs/handle/123456789/2366
AB  - Systematic modification of three structurally different minerals (zeolite, mica, and vermiculite) was carried out with the aim of determining the modification mechanism and exposing the hydrophobic surface that can be used as a sorbent for many organic compounds. Mechanism of modification with cationic surfactant depends strongly on the mineral type. In order to identify the influence of aluminosilicates structural differences on the modification process, adsorption experiments with organic matter and water vapor, supplemented with the DTA/TG analysis, were performed. The cation exchange capacity (CEC) value was 1454>560>28meqkg(-1) for zeolite (clinoptilolite), vermiculite, and mica (muscovite), respectively. Despite its CEC value, vermiculite adsorbed three times the amount of organic matter than did clinoptilolite due to the porous structure of zeolite, which acted to limit the adsorption only on the external exchangeable cations. If the loading amount is equal to the CEC or the external cation exchange capacity for clinoptilolite (ECEC approximate to 10% CEC), the monolayer will form while mineral surface will have hydrophobic character. Only one active center exists at the surface of the clinoptilolite that was identified by DTA curves with a sharp and defined peak around 300 degrees C and by the mass loss at the TG diagrams. Two significant and equal active centers were observed in vermiculite, one for the exchange of the surface cations and the other for the interlayer cations and H2O molecules. Muscovite CEC is negligible, and due to the absence of any other functional groups, the modification of this mineral was impossible.
PB  - Springer
T2  - Journal of Thermal Analysis and Calorimetry
T1  - Differences in coating mechanism of structurally different aluminosilicates observed through the thermal analysis
VL  - 134
IS  - 2
SP  - 1011
EP  - 1019
DO  - 10.1007/s10973-018-7351-3
ER  - 

@article{
author = "Milićević, Sonja and Martinović, Sanja and Milošević, Vladan and Stojanović, Jovica and Povrenović, Dragan",
year = "2018",
abstract = "Systematic modification of three structurally different minerals (zeolite, mica, and vermiculite) was carried out with the aim of determining the modification mechanism and exposing the hydrophobic surface that can be used as a sorbent for many organic compounds. Mechanism of modification with cationic surfactant depends strongly on the mineral type. In order to identify the influence of aluminosilicates structural differences on the modification process, adsorption experiments with organic matter and water vapor, supplemented with the DTA/TG analysis, were performed. The cation exchange capacity (CEC) value was 1454>560>28meqkg(-1) for zeolite (clinoptilolite), vermiculite, and mica (muscovite), respectively. Despite its CEC value, vermiculite adsorbed three times the amount of organic matter than did clinoptilolite due to the porous structure of zeolite, which acted to limit the adsorption only on the external exchangeable cations. If the loading amount is equal to the CEC or the external cation exchange capacity for clinoptilolite (ECEC approximate to 10% CEC), the monolayer will form while mineral surface will have hydrophobic character. Only one active center exists at the surface of the clinoptilolite that was identified by DTA curves with a sharp and defined peak around 300 degrees C and by the mass loss at the TG diagrams. Two significant and equal active centers were observed in vermiculite, one for the exchange of the surface cations and the other for the interlayer cations and H2O molecules. Muscovite CEC is negligible, and due to the absence of any other functional groups, the modification of this mineral was impossible.",
publisher = "Springer",
journal = "Journal of Thermal Analysis and Calorimetry",
title = "Differences in coating mechanism of structurally different aluminosilicates observed through the thermal analysis",
volume = "134",
number = "2",
pages = "1011-1019",
doi = "10.1007/s10973-018-7351-3"
}

Milićević, S., Martinović, S., Milošević, V., Stojanović, J.,& Povrenović, D.. (2018). Differences in coating mechanism of structurally different aluminosilicates observed through the thermal analysis. in Journal of Thermal Analysis and Calorimetry
Springer., 134(2), 1011-1019.
https://doi.org/10.1007/s10973-018-7351-3

Milićević S, Martinović S, Milošević V, Stojanović J, Povrenović D. Differences in coating mechanism of structurally different aluminosilicates observed through the thermal analysis. in Journal of Thermal Analysis and Calorimetry. 2018;134(2):1011-1019.
doi:10.1007/s10973-018-7351-3 .

Milićević, Sonja, Martinović, Sanja, Milošević, Vladan, Stojanović, Jovica, Povrenović, Dragan, "Differences in coating mechanism of structurally different aluminosilicates observed through the thermal analysis" in Journal of Thermal Analysis and Calorimetry, 134, no. 2 (2018):1011-1019,
https://doi.org/10.1007/s10973-018-7351-3 . .

TY  - CONF
AU  - Pavlović, Marko
AU  - Martinović, Sanja
AU  - Dojčinović, Marina
AU  - Vlahović, Milica
AU  - Stević, Zoran
AU  - Volkov Husović, Tatjana
PY  - 2017
UR  - https://cer.ihtm.bg.ac.rs/handle/123456789/7259
AB  - This study is focused on monitoring the degradation level of zircon based ceramic materials during exposure to cavitation. In addition to conventional degradation monitoring methods, weight loss measuring, the emphasis is on monitoring the changes occurring at the surface of the sample by taking the photos and analyzing of these images. In this paper, several parameters are monitored by image analysis: the level of surface degradation, the number of pits, and the average area of the pits. This method proved to be very fast and useful for a quantification of damage which could improve the prediction of the material lifetime.
PB  - Bor : University of Belgrade - Technical Faculty in Bor
C3  - Proceedings - 49th International October Conference on Mining and Metallurgy-IOC-2017, October 18-21 2017, Bor Lake, Serbia
T1  - Damage level evaluation of zircon samples caused by cavitation erosion using image analysis
SP  - 594
EP  - 597
UR  - https://hdl.handle.net/21.15107/rcub_cer_7259
ER  - 

@conference{
author = "Pavlović, Marko and Martinović, Sanja and Dojčinović, Marina and Vlahović, Milica and Stević, Zoran and Volkov Husović, Tatjana",
year = "2017",
abstract = "This study is focused on monitoring the degradation level of zircon based ceramic materials during exposure to cavitation. In addition to conventional degradation monitoring methods, weight loss measuring, the emphasis is on monitoring the changes occurring at the surface of the sample by taking the photos and analyzing of these images. In this paper, several parameters are monitored by image analysis: the level of surface degradation, the number of pits, and the average area of the pits. This method proved to be very fast and useful for a quantification of damage which could improve the prediction of the material lifetime.",
publisher = "Bor : University of Belgrade - Technical Faculty in Bor",
journal = "Proceedings - 49th International October Conference on Mining and Metallurgy-IOC-2017, October 18-21 2017, Bor Lake, Serbia",
title = "Damage level evaluation of zircon samples caused by cavitation erosion using image analysis",
pages = "594-597",
url = "https://hdl.handle.net/21.15107/rcub_cer_7259"
}

Pavlović, M., Martinović, S., Dojčinović, M., Vlahović, M., Stević, Z.,& Volkov Husović, T.. (2017). Damage level evaluation of zircon samples caused by cavitation erosion using image analysis. in Proceedings - 49th International October Conference on Mining and Metallurgy-IOC-2017, October 18-21 2017, Bor Lake, Serbia
Bor : University of Belgrade - Technical Faculty in Bor., 594-597.
https://hdl.handle.net/21.15107/rcub_cer_7259

Pavlović M, Martinović S, Dojčinović M, Vlahović M, Stević Z, Volkov Husović T. Damage level evaluation of zircon samples caused by cavitation erosion using image analysis. in Proceedings - 49th International October Conference on Mining and Metallurgy-IOC-2017, October 18-21 2017, Bor Lake, Serbia. 2017;:594-597.
https://hdl.handle.net/21.15107/rcub_cer_7259 .

Pavlović, Marko, Martinović, Sanja, Dojčinović, Marina, Vlahović, Milica, Stević, Zoran, Volkov Husović, Tatjana, "Damage level evaluation of zircon samples caused by cavitation erosion using image analysis" in Proceedings - 49th International October Conference on Mining and Metallurgy-IOC-2017, October 18-21 2017, Bor Lake, Serbia (2017):594-597,
https://hdl.handle.net/21.15107/rcub_cer_7259 .

TY  - CONF
AU  - Pavlović, Marko
AU  - Martinović, Sanja
AU  - Vlahović, Milica
AU  - Dojčinović, Marina
AU  - Stević, Zoran
AU  - Volkov Husović, Tatjana
AU  - Bondarenko, Olexander
PY  - 2017
UR  - https://cer.ihtm.bg.ac.rs/handle/123456789/6917
AB  - Cavitation erosion of mullite samples was monitored using vibratory cavitation set up with stationary sample. The level of degradation of the sample was monitored using weight loss and image analysis. Thermal imaging analysis was focused on determination of temperature line profile and histogram of temperature distribution at the end of the experiment. The results of image analysis were compared with infrared thermography results.
PB  - ПП Полiтexперiодика
C3  - Proceedings - XVIII International scientific-practical conference, Modern information and electronic technologies
T1  - Implementation of infrared thermography on defects monitoring during cavitation erosion of mullite ceramic
SP  - 48
EP  - 51
UR  - https://hdl.handle.net/21.15107/rcub_cer_6917
ER  - 

@conference{
author = "Pavlović, Marko and Martinović, Sanja and Vlahović, Milica and Dojčinović, Marina and Stević, Zoran and Volkov Husović, Tatjana and Bondarenko, Olexander",
year = "2017",
abstract = "Cavitation erosion of mullite samples was monitored using vibratory cavitation set up with stationary sample. The level of degradation of the sample was monitored using weight loss and image analysis. Thermal imaging analysis was focused on determination of temperature line profile and histogram of temperature distribution at the end of the experiment. The results of image analysis were compared with infrared thermography results.",
publisher = "ПП Полiтexперiодика",
journal = "Proceedings - XVIII International scientific-practical conference, Modern information and electronic technologies",
title = "Implementation of infrared thermography on defects monitoring during cavitation erosion of mullite ceramic",
pages = "48-51",
url = "https://hdl.handle.net/21.15107/rcub_cer_6917"
}

Pavlović, M., Martinović, S., Vlahović, M., Dojčinović, M., Stević, Z., Volkov Husović, T.,& Bondarenko, O.. (2017). Implementation of infrared thermography on defects monitoring during cavitation erosion of mullite ceramic. in Proceedings - XVIII International scientific-practical conference, Modern information and electronic technologies
ПП Полiтexперiодика., 48-51.
https://hdl.handle.net/21.15107/rcub_cer_6917

Pavlović M, Martinović S, Vlahović M, Dojčinović M, Stević Z, Volkov Husović T, Bondarenko O. Implementation of infrared thermography on defects monitoring during cavitation erosion of mullite ceramic. in Proceedings - XVIII International scientific-practical conference, Modern information and electronic technologies. 2017;:48-51.
https://hdl.handle.net/21.15107/rcub_cer_6917 .

Pavlović, Marko, Martinović, Sanja, Vlahović, Milica, Dojčinović, Marina, Stević, Zoran, Volkov Husović, Tatjana, Bondarenko, Olexander, "Implementation of infrared thermography on defects monitoring during cavitation erosion of mullite ceramic" in Proceedings - XVIII International scientific-practical conference, Modern information and electronic technologies (2017):48-51,
https://hdl.handle.net/21.15107/rcub_cer_6917 .

TY  - JOUR
AU  - Pavlović, Marko D.
AU  - Dojčinović, Marina
AU  - Martinović, Sanja
AU  - Vlahović, Milica
AU  - Stević, Zoran
AU  - Jovanović, Marina N.
AU  - Volkov-Husović, Tatjana
PY  - 2017
UR  - https://cer.ihtm.bg.ac.rs/handle/123456789/2056
AB  - Mechanical shock of zircon based ceramic induced by cavitation erosion testing was investigated in this study. Several parameters were followed in order to determine level of material degradation during the cavitation erosion testing. Mass loss was taken as a conventional criterion for material degradation, while the level of surface degradation was evaluated by image and thermal imaging analyses. Results show high cavitation resistance of zircon ceramics and their suitability when vigorous cavitation erosion environment is expected.
PB  - Belgrade : International Institute for the Science of Sintering
T2  - Science of Sintering
T1  - Determination of Degradation Level during Cavitation Erosion of Zircon Based Ceramic
VL  - 49
IS  - 2
SP  - 175
EP  - 185
DO  - 10.2298/SOS1702175P
ER  - 

@article{
author = "Pavlović, Marko D. and Dojčinović, Marina and Martinović, Sanja and Vlahović, Milica and Stević, Zoran and Jovanović, Marina N. and Volkov-Husović, Tatjana",
year = "2017",
abstract = "Mechanical shock of zircon based ceramic induced by cavitation erosion testing was investigated in this study. Several parameters were followed in order to determine level of material degradation during the cavitation erosion testing. Mass loss was taken as a conventional criterion for material degradation, while the level of surface degradation was evaluated by image and thermal imaging analyses. Results show high cavitation resistance of zircon ceramics and their suitability when vigorous cavitation erosion environment is expected.",
publisher = "Belgrade : International Institute for the Science of Sintering",
journal = "Science of Sintering",
title = "Determination of Degradation Level during Cavitation Erosion of Zircon Based Ceramic",
volume = "49",
number = "2",
pages = "175-185",
doi = "10.2298/SOS1702175P"
}

Pavlović, M. D., Dojčinović, M., Martinović, S., Vlahović, M., Stević, Z., Jovanović, M. N.,& Volkov-Husović, T.. (2017). Determination of Degradation Level during Cavitation Erosion of Zircon Based Ceramic. in Science of Sintering
Belgrade : International Institute for the Science of Sintering., 49(2), 175-185.
https://doi.org/10.2298/SOS1702175P

Pavlović MD, Dojčinović M, Martinović S, Vlahović M, Stević Z, Jovanović MN, Volkov-Husović T. Determination of Degradation Level during Cavitation Erosion of Zircon Based Ceramic. in Science of Sintering. 2017;49(2):175-185.
doi:10.2298/SOS1702175P .

Pavlović, Marko D., Dojčinović, Marina, Martinović, Sanja, Vlahović, Milica, Stević, Zoran, Jovanović, Marina N., Volkov-Husović, Tatjana, "Determination of Degradation Level during Cavitation Erosion of Zircon Based Ceramic" in Science of Sintering, 49, no. 2 (2017):175-185,
https://doi.org/10.2298/SOS1702175P . .

TY  - JOUR
AU  - Martinović, Sanja
AU  - Vlahović, Milica
AU  - Ponomaryova, Elena
AU  - Ryzhkov, I. V.
AU  - Jovanović, M.
AU  - Busatlic, I.
AU  - Volkov-Husović, Tatjana
AU  - Stević, Zoran
PY  - 2017
UR  - https://cer.ihtm.bg.ac.rs/handle/123456789/2174
AB  - The possibility of applying fly ash from power plants as a binder in supercapacitor electrodes based on activated carbon was investigated in this research. Based on the mechanical and electrical properties of the electrodes, the optimal ratio between fly ash and AC was determined. Supercapacitor electrodes were prepared in two ways: by pressing and by laser solidification. The preparation method significantly affected physical properties of the electrodes as well as the electrochemical behavior in supercapacitor setup. The electrodes were electrochemically tested by galvanostatic and potentiostatic methods and cyclic voltammetry. In order to improve the estimation of supercapacitor parameters, mathematical model that perfectly describes the behavior of investigated electrodes in aqueous solution of sodium nitrate was developed. The best results were obtained with laser-solidified electrode in 1M aqueous solution of NaNO3. Specific capacitance of 105 F/g, serial resistance of 0.57 Omega and self-discharge resistance of 95 Omega were achieved. Stability at high number of cycles proved to be very good. After 2000 cycles of CV at scan rate of 100 mV/s, specific capacitance fell by only 4.6 %.
PB  - Esg, Belgrade
T2  - International Journal of Electrochemical Science
T1  - Electrochemical Behavior of Supercapacitor Electrodes Based on Activated Carbon and Fly Ash
VL  - 12
IS  - 8
SP  - 7287
EP  - 7299
DO  - 10.20964/2017.08.63
ER  - 

@article{
author = "Martinović, Sanja and Vlahović, Milica and Ponomaryova, Elena and Ryzhkov, I. V. and Jovanović, M. and Busatlic, I. and Volkov-Husović, Tatjana and Stević, Zoran",
year = "2017",
abstract = "The possibility of applying fly ash from power plants as a binder in supercapacitor electrodes based on activated carbon was investigated in this research. Based on the mechanical and electrical properties of the electrodes, the optimal ratio between fly ash and AC was determined. Supercapacitor electrodes were prepared in two ways: by pressing and by laser solidification. The preparation method significantly affected physical properties of the electrodes as well as the electrochemical behavior in supercapacitor setup. The electrodes were electrochemically tested by galvanostatic and potentiostatic methods and cyclic voltammetry. In order to improve the estimation of supercapacitor parameters, mathematical model that perfectly describes the behavior of investigated electrodes in aqueous solution of sodium nitrate was developed. The best results were obtained with laser-solidified electrode in 1M aqueous solution of NaNO3. Specific capacitance of 105 F/g, serial resistance of 0.57 Omega and self-discharge resistance of 95 Omega were achieved. Stability at high number of cycles proved to be very good. After 2000 cycles of CV at scan rate of 100 mV/s, specific capacitance fell by only 4.6 %.",
publisher = "Esg, Belgrade",
journal = "International Journal of Electrochemical Science",
title = "Electrochemical Behavior of Supercapacitor Electrodes Based on Activated Carbon and Fly Ash",
volume = "12",
number = "8",
pages = "7287-7299",
doi = "10.20964/2017.08.63"
}

Martinović, S., Vlahović, M., Ponomaryova, E., Ryzhkov, I. V., Jovanović, M., Busatlic, I., Volkov-Husović, T.,& Stević, Z.. (2017). Electrochemical Behavior of Supercapacitor Electrodes Based on Activated Carbon and Fly Ash. in International Journal of Electrochemical Science
Esg, Belgrade., 12(8), 7287-7299.
https://doi.org/10.20964/2017.08.63

Martinović S, Vlahović M, Ponomaryova E, Ryzhkov IV, Jovanović M, Busatlic I, Volkov-Husović T, Stević Z. Electrochemical Behavior of Supercapacitor Electrodes Based on Activated Carbon and Fly Ash. in International Journal of Electrochemical Science. 2017;12(8):7287-7299.
doi:10.20964/2017.08.63 .

Martinović, Sanja, Vlahović, Milica, Ponomaryova, Elena, Ryzhkov, I. V., Jovanović, M., Busatlic, I., Volkov-Husović, Tatjana, Stević, Zoran, "Electrochemical Behavior of Supercapacitor Electrodes Based on Activated Carbon and Fly Ash" in International Journal of Electrochemical Science, 12, no. 8 (2017):7287-7299,
https://doi.org/10.20964/2017.08.63 . .

TY  - JOUR
AU  - Milićević, Sonja
AU  - Povrenović, Dragan
AU  - Milošević, Vladan
AU  - Martinović, Sanja
PY  - 2017
UR  - https://cer.ihtm.bg.ac.rs/handle/123456789/2060
AB  - In this paper the ability of three natural zeolites from different localities (Vranjska banja-VB, Igroš-I and Baia Mare-BM deposits) to remove copper has been investigated. These three zeolites were subjected to the elementary analysis as well as XRDP and DTA/TG analysis due to complete characterization. Cation exchange capacity of VB, I and BM zeolites were 150.1, 169.2, and 176.5 meq/100g. The maximum adsorption capacity for the copper adsorption on VB, I and BM-zeolites were 7.75, 8.51, and 11.18 mg/g. Based on the obtained results the mathematical expression that describes correlation between the CEC and copper adsorption capacity has been developed. This linear dependance has been tested with the vast variety of experimental results. According to this expression it is possible to predict the copper adsorption capacity for different zeolites based only on their CEC value.
AB  - U radu su prikazani rezultati ispitivanja uklanjanja jona bakra primenom tri prirodna zeolita sa različitih lokaliteta (Vranjska banja-VB, Igroš-I i Baia Mare-BM). U cilju karakterizacije zeolita, izvršena su ispitivanja elementarnog sastava, kao i rentgenska (XRDP) i termijska analiza (DTA/TG). Kapaciteti katjonske izmene (CEC) ispitivanih zeolita VB, I i BM iznose 150,1, 169,2 i 176,5 meq/100g. Maksimalni adsorpcioni kapaciteti bakra na VB, I i BM zeolitima iznose 7,75, 8,51, i 11,18 mg/g. Na osnovu ostvarenih rezultata, dobijena je matematička zavisnost koja dobro opisuje vezu između vrednosti CEC i adsorpcionog kapaciteta za bakar. Ova lineralna zavisnost je testirana primenom različitih eksperimentalnih rezultata. Primenom ove zavisnosti moguće je da se predvidi vrednost adsorpcionog kapaciteta bakra na različitim zeolitima poznavanjem njegove CEC vrednosti. .
PB  - University of Belgrade, Technical Faculty Bor
T2  - Journal of Mining and Metallurgy A: Mining
T1  - Predicting the copper adsorption capacity on different zeolites
T1  - Predviđanje adsorpcionog kapaciteta bakra na različitim zeolitima
VL  - 53
IS  - 1
SP  - 57
EP  - 63
DO  - 10.5937/JMMA1701057M
ER  - 

@article{
author = "Milićević, Sonja and Povrenović, Dragan and Milošević, Vladan and Martinović, Sanja",
year = "2017",
abstract = "In this paper the ability of three natural zeolites from different localities (Vranjska banja-VB, Igroš-I and Baia Mare-BM deposits) to remove copper has been investigated. These three zeolites were subjected to the elementary analysis as well as XRDP and DTA/TG analysis due to complete characterization. Cation exchange capacity of VB, I and BM zeolites were 150.1, 169.2, and 176.5 meq/100g. The maximum adsorption capacity for the copper adsorption on VB, I and BM-zeolites were 7.75, 8.51, and 11.18 mg/g. Based on the obtained results the mathematical expression that describes correlation between the CEC and copper adsorption capacity has been developed. This linear dependance has been tested with the vast variety of experimental results. According to this expression it is possible to predict the copper adsorption capacity for different zeolites based only on their CEC value., U radu su prikazani rezultati ispitivanja uklanjanja jona bakra primenom tri prirodna zeolita sa različitih lokaliteta (Vranjska banja-VB, Igroš-I i Baia Mare-BM). U cilju karakterizacije zeolita, izvršena su ispitivanja elementarnog sastava, kao i rentgenska (XRDP) i termijska analiza (DTA/TG). Kapaciteti katjonske izmene (CEC) ispitivanih zeolita VB, I i BM iznose 150,1, 169,2 i 176,5 meq/100g. Maksimalni adsorpcioni kapaciteti bakra na VB, I i BM zeolitima iznose 7,75, 8,51, i 11,18 mg/g. Na osnovu ostvarenih rezultata, dobijena je matematička zavisnost koja dobro opisuje vezu između vrednosti CEC i adsorpcionog kapaciteta za bakar. Ova lineralna zavisnost je testirana primenom različitih eksperimentalnih rezultata. Primenom ove zavisnosti moguće je da se predvidi vrednost adsorpcionog kapaciteta bakra na različitim zeolitima poznavanjem njegove CEC vrednosti. .",
publisher = "University of Belgrade, Technical Faculty Bor",
journal = "Journal of Mining and Metallurgy A: Mining",
title = "Predicting the copper adsorption capacity on different zeolites, Predviđanje adsorpcionog kapaciteta bakra na različitim zeolitima",
volume = "53",
number = "1",
pages = "57-63",
doi = "10.5937/JMMA1701057M"
}

Milićević, S., Povrenović, D., Milošević, V.,& Martinović, S.. (2017). Predicting the copper adsorption capacity on different zeolites. in Journal of Mining and Metallurgy A: Mining
University of Belgrade, Technical Faculty Bor., 53(1), 57-63.
https://doi.org/10.5937/JMMA1701057M

Milićević S, Povrenović D, Milošević V, Martinović S. Predicting the copper adsorption capacity on different zeolites. in Journal of Mining and Metallurgy A: Mining. 2017;53(1):57-63.
doi:10.5937/JMMA1701057M .

Milićević, Sonja, Povrenović, Dragan, Milošević, Vladan, Martinović, Sanja, "Predicting the copper adsorption capacity on different zeolites" in Journal of Mining and Metallurgy A: Mining, 53, no. 1 (2017):57-63,
https://doi.org/10.5937/JMMA1701057M . .

TY  - CONF
AU  - Pavlović, Marko
AU  - Dojčinović, Marina
AU  - Martinović, Sanja
AU  - Vlahović, Milica
AU  - Stević, Zoran
AU  - Volkov Husović, Tatjana
PY  - 2016
UR  - https://cer.ihtm.bg.ac.rs/handle/123456789/7257
AB  - The paper presents the results of testing the mullite ceramics in terms of cavitation erosion. Mullite samples were sintered at 1200 °C. To determine the cavitation resistance the ultrasonic vibration method with stationary specimen was used. Mass loss and level of degradation of surface samples were monitored using the image analysis. Test results showed a high cavitation resistance of mullite ceramics and its possible application to various areas-metallurgy, mining, construction, chemical industry, where it is expected the presence of cavitation erosion.
PB  - Bor : University of Belgrade - Technical Faculty in Bor
PB  - Bor : Mining and Metallurgy Institute Bor
C3  - The 48th International October Conference on Mining and Metallurgy, Proceedings, September 28 - October 1st, 2016, Bor, Serbia
T1  - Cavitation damage of mullite ceramic: implementation of image analysis
SP  - 241
EP  - 244
UR  - https://hdl.handle.net/21.15107/rcub_cer_7257
ER  - 

@conference{
author = "Pavlović, Marko and Dojčinović, Marina and Martinović, Sanja and Vlahović, Milica and Stević, Zoran and Volkov Husović, Tatjana",
year = "2016",
abstract = "The paper presents the results of testing the mullite ceramics in terms of cavitation erosion. Mullite samples were sintered at 1200 °C. To determine the cavitation resistance the ultrasonic vibration method with stationary specimen was used. Mass loss and level of degradation of surface samples were monitored using the image analysis. Test results showed a high cavitation resistance of mullite ceramics and its possible application to various areas-metallurgy, mining, construction, chemical industry, where it is expected the presence of cavitation erosion.",
publisher = "Bor : University of Belgrade - Technical Faculty in Bor, Bor : Mining and Metallurgy Institute Bor",
journal = "The 48th International October Conference on Mining and Metallurgy, Proceedings, September 28 - October 1st, 2016, Bor, Serbia",
title = "Cavitation damage of mullite ceramic: implementation of image analysis",
pages = "241-244",
url = "https://hdl.handle.net/21.15107/rcub_cer_7257"
}

Pavlović, M., Dojčinović, M., Martinović, S., Vlahović, M., Stević, Z.,& Volkov Husović, T.. (2016). Cavitation damage of mullite ceramic: implementation of image analysis. in The 48th International October Conference on Mining and Metallurgy, Proceedings, September 28 - October 1st, 2016, Bor, Serbia
Bor : University of Belgrade - Technical Faculty in Bor., 241-244.
https://hdl.handle.net/21.15107/rcub_cer_7257

Pavlović M, Dojčinović M, Martinović S, Vlahović M, Stević Z, Volkov Husović T. Cavitation damage of mullite ceramic: implementation of image analysis. in The 48th International October Conference on Mining and Metallurgy, Proceedings, September 28 - October 1st, 2016, Bor, Serbia. 2016;:241-244.
https://hdl.handle.net/21.15107/rcub_cer_7257 .

Pavlović, Marko, Dojčinović, Marina, Martinović, Sanja, Vlahović, Milica, Stević, Zoran, Volkov Husović, Tatjana, "Cavitation damage of mullite ceramic: implementation of image analysis" in The 48th International October Conference on Mining and Metallurgy, Proceedings, September 28 - October 1st, 2016, Bor, Serbia (2016):241-244,
https://hdl.handle.net/21.15107/rcub_cer_7257 .