Portuguese Foundation for Science and Technology, P.I., (CEECINST/00077/2021).

Link to this page

Portuguese Foundation for Science and Technology, P.I., (CEECINST/00077/2021).

Authors

Publications

The influence of rainfall factors on soil resistance to erosion

Živanović, Nikola; Rončević, Vukašin; Ferreira, Carla; Kašanin-Grubin, Milica; Ćorluka, Stevan; Rupar, Veljko; Čebašek, Vladimir

(EGU General Assembly, 2024)

TY  - CONF
AU  - Živanović, Nikola
AU  - Rončević, Vukašin
AU  - Ferreira, Carla
AU  - Kašanin-Grubin, Milica
AU  - Ćorluka, Stevan
AU  - Rupar, Veljko
AU  - Čebašek, Vladimir
PY  - 2024
UR  - https://cer.ihtm.bg.ac.rs/handle/123456789/7524
AB  - For the purposes of researching the influence of rainfall factors on soil shear strength, i.e. soil
erosion resistance, research was conducted on plots measuring 1.0x0.3 m at a slope of 15°, with
equally prepared soil. It’s been carried out 12 rainfall simulations with different values of rainfall
factors (rainfall intensity and drops diameter). These simulations were carried out with a modified
rain simulator with sprayers by Živanović et. al (2021). The analysis of the uniformity of the
prepared soil, as well as the examination of the influence of simulated rainfall factors on soil
erosion, was carried out by measuring with a pocket vane tester (Eijkelkamp M1.14.10.E). The
measurement was carried out at 30 regularly spaced locations on every plot, immediately after the
simulation was completed. Also, the measurement was carried out after 24 hours in three places
(upper, middle and lower third of the plot). Spatial distribution of measured values was assessed
by Christians' coefficient of uniformity CU. The measured shear strength values of the prepared
soil range from 2.1 to 6.9 kN/m2. The shear strength values immediately after the simulation range
from 0.4 to 5.4 kN/m2, while after 24 hours they range from 2.4 to 8.1 kN/m2. The CU values of the
prepared soil range from 68% to 81% (average 75%). Immediately after the simulation, Cu values
range from 73% to 83%, while after 24 hours, from 69% to 91%. In general, there is a clear trend of
decreasing values measured with the pocket vane tester from the top to the bottom of the plots.
Also, the influence of the change in soil moisture on the values of soil shear strength was
observed. The change in rainfall factors affects the change in soil resistance to erosion.
PB  - EGU General Assembly
C3  - EGU General Assembly 2024, Vienna, Austria, 14–19 Apr 2024
T1  - The influence of rainfall factors on soil resistance to erosion
SP  - EGU24-1137
DO  - 10.5194/egusphere-egu24-1137
ER  - 
@conference{
author = "Živanović, Nikola and Rončević, Vukašin and Ferreira, Carla and Kašanin-Grubin, Milica and Ćorluka, Stevan and Rupar, Veljko and Čebašek, Vladimir",
year = "2024",
abstract = "For the purposes of researching the influence of rainfall factors on soil shear strength, i.e. soil
erosion resistance, research was conducted on plots measuring 1.0x0.3 m at a slope of 15°, with
equally prepared soil. It’s been carried out 12 rainfall simulations with different values of rainfall
factors (rainfall intensity and drops diameter). These simulations were carried out with a modified
rain simulator with sprayers by Živanović et. al (2021). The analysis of the uniformity of the
prepared soil, as well as the examination of the influence of simulated rainfall factors on soil
erosion, was carried out by measuring with a pocket vane tester (Eijkelkamp M1.14.10.E). The
measurement was carried out at 30 regularly spaced locations on every plot, immediately after the
simulation was completed. Also, the measurement was carried out after 24 hours in three places
(upper, middle and lower third of the plot). Spatial distribution of measured values was assessed
by Christians' coefficient of uniformity CU. The measured shear strength values of the prepared
soil range from 2.1 to 6.9 kN/m2. The shear strength values immediately after the simulation range
from 0.4 to 5.4 kN/m2, while after 24 hours they range from 2.4 to 8.1 kN/m2. The CU values of the
prepared soil range from 68% to 81% (average 75%). Immediately after the simulation, Cu values
range from 73% to 83%, while after 24 hours, from 69% to 91%. In general, there is a clear trend of
decreasing values measured with the pocket vane tester from the top to the bottom of the plots.
Also, the influence of the change in soil moisture on the values of soil shear strength was
observed. The change in rainfall factors affects the change in soil resistance to erosion.",
publisher = "EGU General Assembly",
journal = "EGU General Assembly 2024, Vienna, Austria, 14–19 Apr 2024",
title = "The influence of rainfall factors on soil resistance to erosion",
pages = "EGU24-1137",
doi = "10.5194/egusphere-egu24-1137"
}
Živanović, N., Rončević, V., Ferreira, C., Kašanin-Grubin, M., Ćorluka, S., Rupar, V.,& Čebašek, V.. (2024). The influence of rainfall factors on soil resistance to erosion. in EGU General Assembly 2024, Vienna, Austria, 14–19 Apr 2024
EGU General Assembly., EGU24-1137.
https://doi.org/10.5194/egusphere-egu24-1137
Živanović N, Rončević V, Ferreira C, Kašanin-Grubin M, Ćorluka S, Rupar V, Čebašek V. The influence of rainfall factors on soil resistance to erosion. in EGU General Assembly 2024, Vienna, Austria, 14–19 Apr 2024. 2024;:EGU24-1137.
doi:10.5194/egusphere-egu24-1137 .
Živanović, Nikola, Rončević, Vukašin, Ferreira, Carla, Kašanin-Grubin, Milica, Ćorluka, Stevan, Rupar, Veljko, Čebašek, Vladimir, "The influence of rainfall factors on soil resistance to erosion" in EGU General Assembly 2024, Vienna, Austria, 14–19 Apr 2024 (2024):EGU24-1137,
https://doi.org/10.5194/egusphere-egu24-1137 . .