TY  - JOUR
AU  - Cvijovic-Alagic, I.
AU  - Cvijovic, Z.
AU  - Mitrovic, S.
AU  - Panić, Vladimir
AU  - Rakin, M.
PY  - 2011
UR  - https://cer.ihtm.bg.ac.rs/handle/123456789/908
AB  - Wear and corrosion behaviour of cold-rolled Ti-13Nb-13Zr alloy, with martensitic microstructure, and Ti-6Al-4V ELI alloy, in martensitic and two-phase (alpha + beta) microstructural conditions, was studied in a Ringer's solution. The wear experiments were performed at room temperature with a normal load of 40 N and sliding speeds 0.26. 0.5 and 1.0 m/s. The corrosion behaviour was studied at 37 degrees C using open circuit potential-time measurements and potentiodynamic polarization. It was found that Ti-13Nb-13Zr alloy has a substantially lower wear resistance than Ti-6Al-4V ELI alloy in both microstructural conditions. Surface damage extent increases with sliding speed increase and is always smallest for martensitic Ti-6Al-4V ELI alloy with highest hardness. Both alloys exhibit spontaneous passivity in Ringer's solution. Corrosion potential values are similar for all three materials. However, Ti-13Nb-13Zr and martensitic Ti-6Al-4V ELI alloys show improved corrosion resistance comparatively to Ti-6Al-4V ELI alloy with (alpha + beta) microstructure. Martensitic Ti-6Al-4V ELI alloy possesses the best combination of both corrosion and wear resistance, although its corrosion resistance is found to be slightly higher than that of the Ti-13Nb-13Zr alloy.
PB  - Oxford : Pergamon-Elsevier Science Ltd
T2  - Corrosion Science
T1  - Wear and corrosion behaviour of Ti-13Nb-13Zr and Ti-6Al-4V alloys in simulated physiological solution
VL  - 53
IS  - 2
SP  - 796
EP  - 808
DO  - 10.1016/j.corsci.2010.11.014
ER  - 

@article{
author = "Cvijovic-Alagic, I. and Cvijovic, Z. and Mitrovic, S. and Panić, Vladimir and Rakin, M.",
year = "2011",
abstract = "Wear and corrosion behaviour of cold-rolled Ti-13Nb-13Zr alloy, with martensitic microstructure, and Ti-6Al-4V ELI alloy, in martensitic and two-phase (alpha + beta) microstructural conditions, was studied in a Ringer's solution. The wear experiments were performed at room temperature with a normal load of 40 N and sliding speeds 0.26. 0.5 and 1.0 m/s. The corrosion behaviour was studied at 37 degrees C using open circuit potential-time measurements and potentiodynamic polarization. It was found that Ti-13Nb-13Zr alloy has a substantially lower wear resistance than Ti-6Al-4V ELI alloy in both microstructural conditions. Surface damage extent increases with sliding speed increase and is always smallest for martensitic Ti-6Al-4V ELI alloy with highest hardness. Both alloys exhibit spontaneous passivity in Ringer's solution. Corrosion potential values are similar for all three materials. However, Ti-13Nb-13Zr and martensitic Ti-6Al-4V ELI alloys show improved corrosion resistance comparatively to Ti-6Al-4V ELI alloy with (alpha + beta) microstructure. Martensitic Ti-6Al-4V ELI alloy possesses the best combination of both corrosion and wear resistance, although its corrosion resistance is found to be slightly higher than that of the Ti-13Nb-13Zr alloy.",
publisher = "Oxford : Pergamon-Elsevier Science Ltd",
journal = "Corrosion Science",
title = "Wear and corrosion behaviour of Ti-13Nb-13Zr and Ti-6Al-4V alloys in simulated physiological solution",
volume = "53",
number = "2",
pages = "796-808",
doi = "10.1016/j.corsci.2010.11.014"
}

Cvijovic-Alagic, I., Cvijovic, Z., Mitrovic, S., Panić, V.,& Rakin, M.. (2011). Wear and corrosion behaviour of Ti-13Nb-13Zr and Ti-6Al-4V alloys in simulated physiological solution. in Corrosion Science
Oxford : Pergamon-Elsevier Science Ltd., 53(2), 796-808.
https://doi.org/10.1016/j.corsci.2010.11.014

Cvijovic-Alagic I, Cvijovic Z, Mitrovic S, Panić V, Rakin M. Wear and corrosion behaviour of Ti-13Nb-13Zr and Ti-6Al-4V alloys in simulated physiological solution. in Corrosion Science. 2011;53(2):796-808.
doi:10.1016/j.corsci.2010.11.014 .

Cvijovic-Alagic, I., Cvijovic, Z., Mitrovic, S., Panić, Vladimir, Rakin, M., "Wear and corrosion behaviour of Ti-13Nb-13Zr and Ti-6Al-4V alloys in simulated physiological solution" in Corrosion Science, 53, no. 2 (2011):796-808,
https://doi.org/10.1016/j.corsci.2010.11.014 . .