TY  - JOUR
AU  - Milosavljević, Anđelka
AU  - Petronić, Sanja
AU  - Polić-Radovanović, Suzana R.
AU  - Babić, Jasmina
AU  - Bajić, Darko
PY  - 2012
UR  - https://cer.ihtm.bg.ac.rs/handle/123456789/6055
AB  - Nickel-based superalloys are distinguished from other materials by their excellent mechanical and physical properties. As they are used at high temperatures and pressures, as well as in aggressive environments, their characteristics need constant improvement. An adequate choice of their chemical composition and the heat-treatment regime contributes to the improvement of the chemical, physical and mechanical properties of these nickel-based superalloy materials. During the heat treatments of the
superalloys Nimonic 263 and Hastelloy S some changes in their microstructures were observed. In this paper the changes in the microstructures after various regimes of the heat treatment were analysed on the fractured surfaces. The fractured surfaces were observed using light microscopy, scanning electron microscopy (SEM), and energy-dispersive X-ray spectrometry (EDS).
AB  - Superzlitine na osnovi niklja se razlikujejo od drugih materialov zaradi svojih odličnih mehanskih in fizikalnih lastnosti. Ker se
jih uporablja pri visokih temperaturah in tlakih ter v agresivnem okolju, je potrebno stalno izboljševati njihove lastnosti.
Primerna izbira kemijske sestave in načina toplotne obdelave prispevata k izbolj{anju kemijskih, fizikalnih in mehanskih
lastnosti superzlitine na osnovi niklja. Med toplotno obdelavo superzlitine Nimonic 263 in Hastelloy S se opazijo spremembe v
mikrostrukturi. V tem članku so analizirane spremembe mikrostrukture na prelomnih površinah po različnih toplotnih
obdelavah. Površina prelomov je bila opazovana s svetlobno mikroskopijo, vrstično elektronsko mikroskopijo (SEM) in rentgensko disperzijsko spektroskopijo (EDS).
PB  - Inštitut za kovinske materiale in tehnologije
T2  - Materiali in tehnologije / Materials and technology
T1  - The influence of the heat-treatment regime on a fracture surface of Nickel-based supperalloys
T1  - Vpliv toplotne obdelave na površino preloma superzlitin na osnovi niklja
VL  - 46
IS  - 4
SP  - 411
EP  - 417
UR  - https://hdl.handle.net/21.15107/rcub_cer_6055
ER  - 

@article{
author = "Milosavljević, Anđelka and Petronić, Sanja and Polić-Radovanović, Suzana R. and Babić, Jasmina and Bajić, Darko",
year = "2012",
abstract = "Nickel-based superalloys are distinguished from other materials by their excellent mechanical and physical properties. As they are used at high temperatures and pressures, as well as in aggressive environments, their characteristics need constant improvement. An adequate choice of their chemical composition and the heat-treatment regime contributes to the improvement of the chemical, physical and mechanical properties of these nickel-based superalloy materials. During the heat treatments of the
superalloys Nimonic 263 and Hastelloy S some changes in their microstructures were observed. In this paper the changes in the microstructures after various regimes of the heat treatment were analysed on the fractured surfaces. The fractured surfaces were observed using light microscopy, scanning electron microscopy (SEM), and energy-dispersive X-ray spectrometry (EDS)., Superzlitine na osnovi niklja se razlikujejo od drugih materialov zaradi svojih odličnih mehanskih in fizikalnih lastnosti. Ker se
jih uporablja pri visokih temperaturah in tlakih ter v agresivnem okolju, je potrebno stalno izboljševati njihove lastnosti.
Primerna izbira kemijske sestave in načina toplotne obdelave prispevata k izbolj{anju kemijskih, fizikalnih in mehanskih
lastnosti superzlitine na osnovi niklja. Med toplotno obdelavo superzlitine Nimonic 263 in Hastelloy S se opazijo spremembe v
mikrostrukturi. V tem članku so analizirane spremembe mikrostrukture na prelomnih površinah po različnih toplotnih
obdelavah. Površina prelomov je bila opazovana s svetlobno mikroskopijo, vrstično elektronsko mikroskopijo (SEM) in rentgensko disperzijsko spektroskopijo (EDS).",
publisher = "Inštitut za kovinske materiale in tehnologije",
journal = "Materiali in tehnologije / Materials and technology",
title = "The influence of the heat-treatment regime on a fracture surface of Nickel-based supperalloys, Vpliv toplotne obdelave na površino preloma superzlitin na osnovi niklja",
volume = "46",
number = "4",
pages = "411-417",
url = "https://hdl.handle.net/21.15107/rcub_cer_6055"
}

Milosavljević, A., Petronić, S., Polić-Radovanović, S. R., Babić, J.,& Bajić, D.. (2012). The influence of the heat-treatment regime on a fracture surface of Nickel-based supperalloys. in Materiali in tehnologije / Materials and technology
Inštitut za kovinske materiale in tehnologije., 46(4), 411-417.
https://hdl.handle.net/21.15107/rcub_cer_6055

Milosavljević A, Petronić S, Polić-Radovanović SR, Babić J, Bajić D. The influence of the heat-treatment regime on a fracture surface of Nickel-based supperalloys. in Materiali in tehnologije / Materials and technology. 2012;46(4):411-417.
https://hdl.handle.net/21.15107/rcub_cer_6055 .

Milosavljević, Anđelka, Petronić, Sanja, Polić-Radovanović, Suzana R., Babić, Jasmina, Bajić, Darko, "The influence of the heat-treatment regime on a fracture surface of Nickel-based supperalloys" in Materiali in tehnologije / Materials and technology, 46, no. 4 (2012):411-417,
https://hdl.handle.net/21.15107/rcub_cer_6055 .