TY  - JOUR
AU  - Radetić, Tamara
AU  - Popović, M.
AU  - Jegdić, Bore
AU  - Romhanji, E.
PY  - 2016
UR  - https://cer.ihtm.bg.ac.rs/handle/123456789/4382
AB  - Influence of annealing temperature on beta-(Al3Mg2) phase precipitation and corrosion properties of sensitised Al-6.8wt% Mg alloy is investigated. Sensitisation of specimens annealed at 320 degrees C results in IGC and SCC susceptibility. Microstructural characterization shows fine precipitation of Mg-rich phase forming nearly continuous film at grain boundaries, despite small precipitated fraction (0.5%), and grain boundary faceting. Sensitised specimens annealed at 265 degrees C are IGC susceptible, but SCC resistant. Precipitation at grain boundaries is discrete, although the precipitated fraction is greater (3%) than in specimens annealed at 320 degrees C. Potentiodynamic measurements show that of all measured parameters, charge density is in the strongest correlation with the NAMLT and SSRT results.
PB  - Wiley
T2  - Materials and Corrosion-Werkstoffe Und Korrosion
T1  - Influence of annealing temperature on sensitisation behaviour and corrosion properties of an Al-6.8wt% Mg alloy
VL  - 67
IS  - 8
SP  - 867
EP  - 875
DO  - 10.1002/maco.201508709
ER  - 

@article{
author = "Radetić, Tamara and Popović, M. and Jegdić, Bore and Romhanji, E.",
year = "2016",
abstract = "Influence of annealing temperature on beta-(Al3Mg2) phase precipitation and corrosion properties of sensitised Al-6.8wt% Mg alloy is investigated. Sensitisation of specimens annealed at 320 degrees C results in IGC and SCC susceptibility. Microstructural characterization shows fine precipitation of Mg-rich phase forming nearly continuous film at grain boundaries, despite small precipitated fraction (0.5%), and grain boundary faceting. Sensitised specimens annealed at 265 degrees C are IGC susceptible, but SCC resistant. Precipitation at grain boundaries is discrete, although the precipitated fraction is greater (3%) than in specimens annealed at 320 degrees C. Potentiodynamic measurements show that of all measured parameters, charge density is in the strongest correlation with the NAMLT and SSRT results.",
publisher = "Wiley",
journal = "Materials and Corrosion-Werkstoffe Und Korrosion",
title = "Influence of annealing temperature on sensitisation behaviour and corrosion properties of an Al-6.8wt% Mg alloy",
volume = "67",
number = "8",
pages = "867-875",
doi = "10.1002/maco.201508709"
}

Radetić, T., Popović, M., Jegdić, B.,& Romhanji, E.. (2016). Influence of annealing temperature on sensitisation behaviour and corrosion properties of an Al-6.8wt% Mg alloy. in Materials and Corrosion-Werkstoffe Und Korrosion
Wiley., 67(8), 867-875.
https://doi.org/10.1002/maco.201508709

Radetić T, Popović M, Jegdić B, Romhanji E. Influence of annealing temperature on sensitisation behaviour and corrosion properties of an Al-6.8wt% Mg alloy. in Materials and Corrosion-Werkstoffe Und Korrosion. 2016;67(8):867-875.
doi:10.1002/maco.201508709 .

Radetić, Tamara, Popović, M., Jegdić, Bore, Romhanji, E., "Influence of annealing temperature on sensitisation behaviour and corrosion properties of an Al-6.8wt% Mg alloy" in Materials and Corrosion-Werkstoffe Und Korrosion, 67, no. 8 (2016):867-875,
https://doi.org/10.1002/maco.201508709 . .

TY  - JOUR
AU  - Radetić, Tamara
AU  - Popović, M.
AU  - Jegdić, Bore
AU  - Romhanji, E.
PY  - 2016
UR  - https://cer.ihtm.bg.ac.rs/handle/123456789/1919
AB  - Influence of annealing temperature on beta-(Al3Mg2) phase precipitation and corrosion properties of sensitised Al-6.8wt% Mg alloy is investigated. Sensitisation of specimens annealed at 320 degrees C results in IGC and SCC susceptibility. Microstructural characterization shows fine precipitation of Mg-rich phase forming nearly continuous film at grain boundaries, despite small precipitated fraction (0.5%), and grain boundary faceting. Sensitised specimens annealed at 265 degrees C are IGC susceptible, but SCC resistant. Precipitation at grain boundaries is discrete, although the precipitated fraction is greater (3%) than in specimens annealed at 320 degrees C. Potentiodynamic measurements show that of all measured parameters, charge density is in the strongest correlation with the NAMLT and SSRT results.
PB  - Wiley
T2  - Materials and Corrosion-Werkstoffe Und Korrosion
T1  - Influence of annealing temperature on sensitisation behaviour and corrosion properties of an Al-6.8wt% Mg alloy
VL  - 67
IS  - 8
SP  - 867
EP  - 875
DO  - 10.1002/maco.201508709
ER  - 

@article{
author = "Radetić, Tamara and Popović, M. and Jegdić, Bore and Romhanji, E.",
year = "2016",
abstract = "Influence of annealing temperature on beta-(Al3Mg2) phase precipitation and corrosion properties of sensitised Al-6.8wt% Mg alloy is investigated. Sensitisation of specimens annealed at 320 degrees C results in IGC and SCC susceptibility. Microstructural characterization shows fine precipitation of Mg-rich phase forming nearly continuous film at grain boundaries, despite small precipitated fraction (0.5%), and grain boundary faceting. Sensitised specimens annealed at 265 degrees C are IGC susceptible, but SCC resistant. Precipitation at grain boundaries is discrete, although the precipitated fraction is greater (3%) than in specimens annealed at 320 degrees C. Potentiodynamic measurements show that of all measured parameters, charge density is in the strongest correlation with the NAMLT and SSRT results.",
publisher = "Wiley",
journal = "Materials and Corrosion-Werkstoffe Und Korrosion",
title = "Influence of annealing temperature on sensitisation behaviour and corrosion properties of an Al-6.8wt% Mg alloy",
volume = "67",
number = "8",
pages = "867-875",
doi = "10.1002/maco.201508709"
}

Radetić, T., Popović, M., Jegdić, B.,& Romhanji, E.. (2016). Influence of annealing temperature on sensitisation behaviour and corrosion properties of an Al-6.8wt% Mg alloy. in Materials and Corrosion-Werkstoffe Und Korrosion
Wiley., 67(8), 867-875.
https://doi.org/10.1002/maco.201508709

Radetić T, Popović M, Jegdić B, Romhanji E. Influence of annealing temperature on sensitisation behaviour and corrosion properties of an Al-6.8wt% Mg alloy. in Materials and Corrosion-Werkstoffe Und Korrosion. 2016;67(8):867-875.
doi:10.1002/maco.201508709 .

Radetić, Tamara, Popović, M., Jegdić, Bore, Romhanji, E., "Influence of annealing temperature on sensitisation behaviour and corrosion properties of an Al-6.8wt% Mg alloy" in Materials and Corrosion-Werkstoffe Und Korrosion, 67, no. 8 (2016):867-875,
https://doi.org/10.1002/maco.201508709 . .

TY  - JOUR
AU  - Talijan, Nadežda M.
AU  - Ćosović, Vladan
AU  - Stajić-Trošić, Jasna
AU  - Grujić, Aleksandar
AU  - Živković, Dragana
AU  - Romhanji, E.
PY  - 2007
UR  - https://cer.ihtm.bg.ac.rs/handle/123456789/289
AB  - The presented work covers part of experimental results of simultaneous study of microstructure, density, hardness and electrical conductivity of sintered electrical contact materials based of Ag- SnO2 with 8, 10 and 12 mass% SnO2. The mentioned characteristics were analyzed in the function of different sintering regimes and after additional mechanical treatment (forging and rolling). The influence of small addition of In2O3 (2.9 mass%) on the increase of dispersion of main oxide SnO2 in Ag matrix is observed and presented also.
PB  - Technical Faculty, Bor
T2  - Journal of Mining and Metallurgy B: Metallurgy
T1  - Microstructure and properties of silver based cadmium free electrical contact materials
VL  - 43
IS  - 2
SP  - 171
EP  - 176
DO  - 10.2298/JMMB0702171T
ER  - 

@article{
author = "Talijan, Nadežda M. and Ćosović, Vladan and Stajić-Trošić, Jasna and Grujić, Aleksandar and Živković, Dragana and Romhanji, E.",
year = "2007",
abstract = "The presented work covers part of experimental results of simultaneous study of microstructure, density, hardness and electrical conductivity of sintered electrical contact materials based of Ag- SnO2 with 8, 10 and 12 mass% SnO2. The mentioned characteristics were analyzed in the function of different sintering regimes and after additional mechanical treatment (forging and rolling). The influence of small addition of In2O3 (2.9 mass%) on the increase of dispersion of main oxide SnO2 in Ag matrix is observed and presented also.",
publisher = "Technical Faculty, Bor",
journal = "Journal of Mining and Metallurgy B: Metallurgy",
title = "Microstructure and properties of silver based cadmium free electrical contact materials",
volume = "43",
number = "2",
pages = "171-176",
doi = "10.2298/JMMB0702171T"
}

Talijan, N. M., Ćosović, V., Stajić-Trošić, J., Grujić, A., Živković, D.,& Romhanji, E.. (2007). Microstructure and properties of silver based cadmium free electrical contact materials. in Journal of Mining and Metallurgy B: Metallurgy
Technical Faculty, Bor., 43(2), 171-176.
https://doi.org/10.2298/JMMB0702171T

Talijan NM, Ćosović V, Stajić-Trošić J, Grujić A, Živković D, Romhanji E. Microstructure and properties of silver based cadmium free electrical contact materials. in Journal of Mining and Metallurgy B: Metallurgy. 2007;43(2):171-176.
doi:10.2298/JMMB0702171T .

Talijan, Nadežda M., Ćosović, Vladan, Stajić-Trošić, Jasna, Grujić, Aleksandar, Živković, Dragana, Romhanji, E., "Microstructure and properties of silver based cadmium free electrical contact materials" in Journal of Mining and Metallurgy B: Metallurgy, 43, no. 2 (2007):171-176,
https://doi.org/10.2298/JMMB0702171T . .