TY  - JOUR
AU  - Manasijević, Dragan
AU  - Minić, D.
AU  - Živković, Dragana
AU  - Vřešt'ál, J.
AU  - Aljilji, A.
AU  - Talijan, Nadežda M.
AU  - Stajić-Trošić, Jasna
AU  - Marjanović, S.
AU  - Todorović, R.
PY  - 2009
UR  - https://cer.ihtm.bg.ac.rs/handle/123456789/591
AB  - The phase diagram of the Cu-In-Sb ternary system is of importance in predicting the interface reaction between In-based solder materials and the Cu substrate. The liquidus surface, invariant equilibria and four vertical sections of the Cu-In-Sb ternary system were calculated by the CALPHAD method using binary thermodynamic parameters included in the COST531 database. Alloys, representing two isopleths from indium corner with molar ratio of copper and antimony equal to 1/3 and 1/1 and two isopleths from antimony corner with molar ratio of indium and copper equal to 3/1 and 1/1 were measured with the DTA (Differential Thermal Analysis) and DSC (Differential Scanning Calorimetry). The experimentally determined phase transition temperatures were compared with calculation results and good mutual agreement was noticed.
T2  - Calphad: Computer Coupling of Phase Diagrams and Thermochemistry
T1  - Experimental investigation and thermodynamic calculation of the Cu-In-Sb phase diagram
VL  - 33
IS  - 1
SP  - 221
EP  - 226
DO  - 10.1016/j.calphad.2008.08.002
ER  - 

@article{
author = "Manasijević, Dragan and Minić, D. and Živković, Dragana and Vřešt'ál, J. and Aljilji, A. and Talijan, Nadežda M. and Stajić-Trošić, Jasna and Marjanović, S. and Todorović, R.",
year = "2009",
abstract = "The phase diagram of the Cu-In-Sb ternary system is of importance in predicting the interface reaction between In-based solder materials and the Cu substrate. The liquidus surface, invariant equilibria and four vertical sections of the Cu-In-Sb ternary system were calculated by the CALPHAD method using binary thermodynamic parameters included in the COST531 database. Alloys, representing two isopleths from indium corner with molar ratio of copper and antimony equal to 1/3 and 1/1 and two isopleths from antimony corner with molar ratio of indium and copper equal to 3/1 and 1/1 were measured with the DTA (Differential Thermal Analysis) and DSC (Differential Scanning Calorimetry). The experimentally determined phase transition temperatures were compared with calculation results and good mutual agreement was noticed.",
journal = "Calphad: Computer Coupling of Phase Diagrams and Thermochemistry",
title = "Experimental investigation and thermodynamic calculation of the Cu-In-Sb phase diagram",
volume = "33",
number = "1",
pages = "221-226",
doi = "10.1016/j.calphad.2008.08.002"
}

Manasijević, D., Minić, D., Živković, D., Vřešt'ál, J., Aljilji, A., Talijan, N. M., Stajić-Trošić, J., Marjanović, S.,& Todorović, R.. (2009). Experimental investigation and thermodynamic calculation of the Cu-In-Sb phase diagram. in Calphad: Computer Coupling of Phase Diagrams and Thermochemistry, 33(1), 221-226.
https://doi.org/10.1016/j.calphad.2008.08.002

Manasijević D, Minić D, Živković D, Vřešt'ál J, Aljilji A, Talijan NM, Stajić-Trošić J, Marjanović S, Todorović R. Experimental investigation and thermodynamic calculation of the Cu-In-Sb phase diagram. in Calphad: Computer Coupling of Phase Diagrams and Thermochemistry. 2009;33(1):221-226.
doi:10.1016/j.calphad.2008.08.002 .

Manasijević, Dragan, Minić, D., Živković, Dragana, Vřešt'ál, J., Aljilji, A., Talijan, Nadežda M., Stajić-Trošić, Jasna, Marjanović, S., Todorović, R., "Experimental investigation and thermodynamic calculation of the Cu-In-Sb phase diagram" in Calphad: Computer Coupling of Phase Diagrams and Thermochemistry, 33, no. 1 (2009):221-226,
https://doi.org/10.1016/j.calphad.2008.08.002 . .