TY  - CONF
AU  - Pavlović, Miomir
AU  - Pavlović, Miroslav
AU  - Pantović Pavlović, Marijana
AU  - Janković, Zoran
AU  - Fuchs-Godec, Regina
AU  - Malinović, Borislav
PY  - 2016
UR  - https://cer.ihtm.bg.ac.rs/handle/123456789/6612
AB  - This article is concerned with synthesis and characterization of electroconductive composite materials prepared by hot molding of mixtures of PMMA and electrochemically deposited copper powder and investigation of the influence of particle morphology on conductivity and percolation threshold of obtained composites and thermal characteristics. Electrodeposited copper powder content was varied from 0.5-8.8 vol%. Analysis of the most significant properties of individual components and prepared composites AFM and TGA analysis. The significant increase of the electrical conductivity can be observed as the copper powder content reaches the percolation threshold at 2.98 vol%. In the investigated range of electrodeposited copper powder concentrations the increase of the electrical conductivity of composites is as much as sixteen orders of magnitude.
PB  - Banjaluka, Republic of Srpska : University of Banjaluka, Faculty of Technology
C3  - Proceedings - XI Conference of Chemists, Technologists and Environmentalists of Republic of Srpska, November 18-19, Teslić, Republic of Srpska, Bosnia and Herzegovina
T1  - Electroconductive copper powder filled PMMA composites
SP  - 125
EP  - 129
UR  - https://hdl.handle.net/21.15107/rcub_cer_6612
ER  - 

@conference{
author = "Pavlović, Miomir and Pavlović, Miroslav and Pantović Pavlović, Marijana and Janković, Zoran and Fuchs-Godec, Regina and Malinović, Borislav",
year = "2016",
abstract = "This article is concerned with synthesis and characterization of electroconductive composite materials prepared by hot molding of mixtures of PMMA and electrochemically deposited copper powder and investigation of the influence of particle morphology on conductivity and percolation threshold of obtained composites and thermal characteristics. Electrodeposited copper powder content was varied from 0.5-8.8 vol%. Analysis of the most significant properties of individual components and prepared composites AFM and TGA analysis. The significant increase of the electrical conductivity can be observed as the copper powder content reaches the percolation threshold at 2.98 vol%. In the investigated range of electrodeposited copper powder concentrations the increase of the electrical conductivity of composites is as much as sixteen orders of magnitude.",
publisher = "Banjaluka, Republic of Srpska : University of Banjaluka, Faculty of Technology",
journal = "Proceedings - XI Conference of Chemists, Technologists and Environmentalists of Republic of Srpska, November 18-19, Teslić, Republic of Srpska, Bosnia and Herzegovina",
title = "Electroconductive copper powder filled PMMA composites",
pages = "125-129",
url = "https://hdl.handle.net/21.15107/rcub_cer_6612"
}

Pavlović, M., Pavlović, M., Pantović Pavlović, M., Janković, Z., Fuchs-Godec, R.,& Malinović, B.. (2016). Electroconductive copper powder filled PMMA composites. in Proceedings - XI Conference of Chemists, Technologists and Environmentalists of Republic of Srpska, November 18-19, Teslić, Republic of Srpska, Bosnia and Herzegovina
Banjaluka, Republic of Srpska : University of Banjaluka, Faculty of Technology., 125-129.
https://hdl.handle.net/21.15107/rcub_cer_6612

Pavlović M, Pavlović M, Pantović Pavlović M, Janković Z, Fuchs-Godec R, Malinović B. Electroconductive copper powder filled PMMA composites. in Proceedings - XI Conference of Chemists, Technologists and Environmentalists of Republic of Srpska, November 18-19, Teslić, Republic of Srpska, Bosnia and Herzegovina. 2016;:125-129.
https://hdl.handle.net/21.15107/rcub_cer_6612 .

Pavlović, Miomir, Pavlović, Miroslav, Pantović Pavlović, Marijana, Janković, Zoran, Fuchs-Godec, Regina, Malinović, Borislav, "Electroconductive copper powder filled PMMA composites" in Proceedings - XI Conference of Chemists, Technologists and Environmentalists of Republic of Srpska, November 18-19, Teslić, Republic of Srpska, Bosnia and Herzegovina (2016):125-129,
https://hdl.handle.net/21.15107/rcub_cer_6612 .

TY  - JOUR
AU  - Malinović, Borislav
AU  - Pavlović, Miomir
AU  - Nikolić, Nebojša D.
PY  - 2013
UR  - https://cer.ihtm.bg.ac.rs/handle/123456789/1165
AB  - Electrolytic treatment of wastewater is a technique in which wastewater is treated by applying electric current through electrodes in the electrochemical reactor. This is actually a combination of many processes such as anodic oxidation, electro-coagulation and electro-flotation. The paper presents the influence of current density (5, 10, 20 mA/cm2) on the efficiency and reaction rate degradation of cyanide from cyanide wastewater in an electrochemical reactor with electrodes made of steel and stainless steel for 60 minutes of reaction time. This paper presents of a significant effect of current density and an.
AB  - Elektrolitički postupak obrade otpadnih voda je tehnika u kojoj otpadne vode tretiramo primjenom električne energije kroz elektrode u elektrohemijskom reaktoru. To je zapravo kombinacija mnogih procesa kao što su anodna oksidacija, elektro-koagulacija, i elektro-flotacija. U radu je prikazan uticaj gustine struje (5, 10, 20 mA/cm2) na efikasnost i brzinu reakcije uklanjanja cijanida iz cijanidnih otpadnih voda u elektrohemijskom reaktoru sa elektrodama od čelika i nerđajućeg čelika za 60 minuta reakcionog vremena. U radu je dokazan značajan uticaj gustine struje i porasta temperature u toku reakcije u reaktoru na brzinu i efikasnost uklanjanja cijanida.
PB  - Belgrade, Serbia : Engineering Society for Corrosion
T2  - Zaštita materijala
T1  - Analysis of efficiency and reaction rate degradation of cyanide under the influence of current density on steel electrodes
T1  - Analiza efikasnosti i brzine reakcije uklanjanja cijanida u zavisnosti od gustine struje na čeličnim elektrodama
VL  - 54
IS  - 4
SP  - 341
EP  - 346
UR  - https://hdl.handle.net/21.15107/rcub_cer_1165
ER  - 

@article{
author = "Malinović, Borislav and Pavlović, Miomir and Nikolić, Nebojša D.",
year = "2013",
abstract = "Electrolytic treatment of wastewater is a technique in which wastewater is treated by applying electric current through electrodes in the electrochemical reactor. This is actually a combination of many processes such as anodic oxidation, electro-coagulation and electro-flotation. The paper presents the influence of current density (5, 10, 20 mA/cm2) on the efficiency and reaction rate degradation of cyanide from cyanide wastewater in an electrochemical reactor with electrodes made of steel and stainless steel for 60 minutes of reaction time. This paper presents of a significant effect of current density and an., Elektrolitički postupak obrade otpadnih voda je tehnika u kojoj otpadne vode tretiramo primjenom električne energije kroz elektrode u elektrohemijskom reaktoru. To je zapravo kombinacija mnogih procesa kao što su anodna oksidacija, elektro-koagulacija, i elektro-flotacija. U radu je prikazan uticaj gustine struje (5, 10, 20 mA/cm2) na efikasnost i brzinu reakcije uklanjanja cijanida iz cijanidnih otpadnih voda u elektrohemijskom reaktoru sa elektrodama od čelika i nerđajućeg čelika za 60 minuta reakcionog vremena. U radu je dokazan značajan uticaj gustine struje i porasta temperature u toku reakcije u reaktoru na brzinu i efikasnost uklanjanja cijanida.",
publisher = "Belgrade, Serbia : Engineering Society for Corrosion",
journal = "Zaštita materijala",
title = "Analysis of efficiency and reaction rate degradation of cyanide under the influence of current density on steel electrodes, Analiza efikasnosti i brzine reakcije uklanjanja cijanida u zavisnosti od gustine struje na čeličnim elektrodama",
volume = "54",
number = "4",
pages = "341-346",
url = "https://hdl.handle.net/21.15107/rcub_cer_1165"
}

Malinović, B., Pavlović, M.,& Nikolić, N. D.. (2013). Analysis of efficiency and reaction rate degradation of cyanide under the influence of current density on steel electrodes. in Zaštita materijala
Belgrade, Serbia : Engineering Society for Corrosion., 54(4), 341-346.
https://hdl.handle.net/21.15107/rcub_cer_1165

Malinović B, Pavlović M, Nikolić ND. Analysis of efficiency and reaction rate degradation of cyanide under the influence of current density on steel electrodes. in Zaštita materijala. 2013;54(4):341-346.
https://hdl.handle.net/21.15107/rcub_cer_1165 .

Malinović, Borislav, Pavlović, Miomir, Nikolić, Nebojša D., "Analysis of efficiency and reaction rate degradation of cyanide under the influence of current density on steel electrodes" in Zaštita materijala, 54, no. 4 (2013):341-346,
https://hdl.handle.net/21.15107/rcub_cer_1165 .