TY  - CONF
AU  - Riđošić, Marija
AU  - Tomić, Milorad V.
AU  - Fuchs-Godec, Regina
AU  - Pavlović, Miroslav M.
AU  - Pavlović, Miomir
PY  - 2018
UR  - https://cer.ihtm.bg.ac.rs/handle/123456789/2647
AB  - Aim of this work was to determine influence of current density on the roughness of the
electrodeposited zinc coatings. Electrodeposition carried out from two same solutions containing
different brightening additives. Furfural (in solution I) and dextrin (in solution II) were used as
additives. Influences of the thickness of the coatings on the surface roughness depending of the
current density and time of deposition and effect of the added additives on the structure of the coatings
were also studied.
Electrodeposition of the zinc coatings was done galvanostatically at current densities of 1, 2 and 4 A
dm-2. Times of electrodeposition were 10, 20 and 30 minutes. Pure zinc was used as anode, and steel
with unknown composition was used as cathode. All experiments were done at room temperature,
baths volume were 500 cm3.
Obtained results show that zinc coatings obtained from solution II have lower roughness than those
deposited from solution I. Current density and thickness of the coatings does not have large influence
on the roughness. The roughness values are from 0.41 μm to 1.219 μm (solution I) and from 0.316
μm to 0.812 μm (solution II). Current efficiency in solution I is 92.98-94.55% and in solution II 91.5-
96.91%. Coatings from solution II have better structure compared to coatings obtained from solution
I, so it can be concluded that dextrin is better brightening additive than furfural in used sulphate
baths.
PB  - Beograd : Naučna ustanova za hemiju, tehnologiju i metalurgiju, Institut od nacionalnog značaja
PB  - Beograd : Udruženje inženjera Srbije za koroziju i zaštitu materijala  ( UISKOZAM )
C3  - Stecište nauke i prakse u oblastima korozije, zaštite materijala i životne sredine [Elektronski izvor] : knjiga radova = Meeting Point of the Science and Practice in the Fields of Corrosion, Materials and Environmental Protection : proceedings / XX YuCorr Međunarodna konferencija = XX YuCorr International Conference, May 21-24, 2018, Tara Mountain, Serbia
T1  - Impact of current density on the surface roughness of electrodeposited zinc coatings from sulphate baths
SP  - 151
EP  - 152
UR  - https://hdl.handle.net/21.15107/rcub_cer_2647
ER  - 

@conference{
author = "Riđošić, Marija and Tomić, Milorad V. and Fuchs-Godec, Regina and Pavlović, Miroslav M. and Pavlović, Miomir",
year = "2018",
abstract = "Aim of this work was to determine influence of current density on the roughness of the
electrodeposited zinc coatings. Electrodeposition carried out from two same solutions containing
different brightening additives. Furfural (in solution I) and dextrin (in solution II) were used as
additives. Influences of the thickness of the coatings on the surface roughness depending of the
current density and time of deposition and effect of the added additives on the structure of the coatings
were also studied.
Electrodeposition of the zinc coatings was done galvanostatically at current densities of 1, 2 and 4 A
dm-2. Times of electrodeposition were 10, 20 and 30 minutes. Pure zinc was used as anode, and steel
with unknown composition was used as cathode. All experiments were done at room temperature,
baths volume were 500 cm3.
Obtained results show that zinc coatings obtained from solution II have lower roughness than those
deposited from solution I. Current density and thickness of the coatings does not have large influence
on the roughness. The roughness values are from 0.41 μm to 1.219 μm (solution I) and from 0.316
μm to 0.812 μm (solution II). Current efficiency in solution I is 92.98-94.55% and in solution II 91.5-
96.91%. Coatings from solution II have better structure compared to coatings obtained from solution
I, so it can be concluded that dextrin is better brightening additive than furfural in used sulphate
baths.",
publisher = "Beograd : Naučna ustanova za hemiju, tehnologiju i metalurgiju, Institut od nacionalnog značaja, Beograd : Udruženje inženjera Srbije za koroziju i zaštitu materijala  ( UISKOZAM )",
journal = "Stecište nauke i prakse u oblastima korozije, zaštite materijala i životne sredine [Elektronski izvor] : knjiga radova = Meeting Point of the Science and Practice in the Fields of Corrosion, Materials and Environmental Protection : proceedings / XX YuCorr Međunarodna konferencija = XX YuCorr International Conference, May 21-24, 2018, Tara Mountain, Serbia",
title = "Impact of current density on the surface roughness of electrodeposited zinc coatings from sulphate baths",
pages = "151-152",
url = "https://hdl.handle.net/21.15107/rcub_cer_2647"
}

Riđošić, M., Tomić, M. V., Fuchs-Godec, R., Pavlović, M. M.,& Pavlović, M.. (2018). Impact of current density on the surface roughness of electrodeposited zinc coatings from sulphate baths. in Stecište nauke i prakse u oblastima korozije, zaštite materijala i životne sredine [Elektronski izvor] : knjiga radova = Meeting Point of the Science and Practice in the Fields of Corrosion, Materials and Environmental Protection : proceedings / XX YuCorr Međunarodna konferencija = XX YuCorr International Conference, May 21-24, 2018, Tara Mountain, Serbia
Beograd : Naučna ustanova za hemiju, tehnologiju i metalurgiju, Institut od nacionalnog značaja., 151-152.
https://hdl.handle.net/21.15107/rcub_cer_2647

Riđošić M, Tomić MV, Fuchs-Godec R, Pavlović MM, Pavlović M. Impact of current density on the surface roughness of electrodeposited zinc coatings from sulphate baths. in Stecište nauke i prakse u oblastima korozije, zaštite materijala i životne sredine [Elektronski izvor] : knjiga radova = Meeting Point of the Science and Practice in the Fields of Corrosion, Materials and Environmental Protection : proceedings / XX YuCorr Međunarodna konferencija = XX YuCorr International Conference, May 21-24, 2018, Tara Mountain, Serbia. 2018;:151-152.
https://hdl.handle.net/21.15107/rcub_cer_2647 .

Riđošić, Marija, Tomić, Milorad V., Fuchs-Godec, Regina, Pavlović, Miroslav M., Pavlović, Miomir, "Impact of current density on the surface roughness of electrodeposited zinc coatings from sulphate baths" in Stecište nauke i prakse u oblastima korozije, zaštite materijala i životne sredine [Elektronski izvor] : knjiga radova = Meeting Point of the Science and Practice in the Fields of Corrosion, Materials and Environmental Protection : proceedings / XX YuCorr Međunarodna konferencija = XX YuCorr International Conference, May 21-24, 2018, Tara Mountain, Serbia (2018):151-152,
https://hdl.handle.net/21.15107/rcub_cer_2647 .

TY  - CONF
AU  - Pavlović, Miomir
AU  - Pavlović, Miroslav
AU  - Pantović Pavlović, Marijana
AU  - Janković, Zoran
AU  - Fuchs-Godec, Regina
AU  - Malinović, Borislav
PY  - 2016
UR  - https://cer.ihtm.bg.ac.rs/handle/123456789/6612
AB  - This article is concerned with synthesis and characterization of electroconductive composite materials prepared by hot molding of mixtures of PMMA and electrochemically deposited copper powder and investigation of the influence of particle morphology on conductivity and percolation threshold of obtained composites and thermal characteristics. Electrodeposited copper powder content was varied from 0.5-8.8 vol%. Analysis of the most significant properties of individual components and prepared composites AFM and TGA analysis. The significant increase of the electrical conductivity can be observed as the copper powder content reaches the percolation threshold at 2.98 vol%. In the investigated range of electrodeposited copper powder concentrations the increase of the electrical conductivity of composites is as much as sixteen orders of magnitude.
PB  - Banjaluka, Republic of Srpska : University of Banjaluka, Faculty of Technology
C3  - Proceedings - XI Conference of Chemists, Technologists and Environmentalists of Republic of Srpska, November 18-19, Teslić, Republic of Srpska, Bosnia and Herzegovina
T1  - Electroconductive copper powder filled PMMA composites
SP  - 125
EP  - 129
UR  - https://hdl.handle.net/21.15107/rcub_cer_6612
ER  - 

@conference{
author = "Pavlović, Miomir and Pavlović, Miroslav and Pantović Pavlović, Marijana and Janković, Zoran and Fuchs-Godec, Regina and Malinović, Borislav",
year = "2016",
abstract = "This article is concerned with synthesis and characterization of electroconductive composite materials prepared by hot molding of mixtures of PMMA and electrochemically deposited copper powder and investigation of the influence of particle morphology on conductivity and percolation threshold of obtained composites and thermal characteristics. Electrodeposited copper powder content was varied from 0.5-8.8 vol%. Analysis of the most significant properties of individual components and prepared composites AFM and TGA analysis. The significant increase of the electrical conductivity can be observed as the copper powder content reaches the percolation threshold at 2.98 vol%. In the investigated range of electrodeposited copper powder concentrations the increase of the electrical conductivity of composites is as much as sixteen orders of magnitude.",
publisher = "Banjaluka, Republic of Srpska : University of Banjaluka, Faculty of Technology",
journal = "Proceedings - XI Conference of Chemists, Technologists and Environmentalists of Republic of Srpska, November 18-19, Teslić, Republic of Srpska, Bosnia and Herzegovina",
title = "Electroconductive copper powder filled PMMA composites",
pages = "125-129",
url = "https://hdl.handle.net/21.15107/rcub_cer_6612"
}

Pavlović, M., Pavlović, M., Pantović Pavlović, M., Janković, Z., Fuchs-Godec, R.,& Malinović, B.. (2016). Electroconductive copper powder filled PMMA composites. in Proceedings - XI Conference of Chemists, Technologists and Environmentalists of Republic of Srpska, November 18-19, Teslić, Republic of Srpska, Bosnia and Herzegovina
Banjaluka, Republic of Srpska : University of Banjaluka, Faculty of Technology., 125-129.
https://hdl.handle.net/21.15107/rcub_cer_6612

Pavlović M, Pavlović M, Pantović Pavlović M, Janković Z, Fuchs-Godec R, Malinović B. Electroconductive copper powder filled PMMA composites. in Proceedings - XI Conference of Chemists, Technologists and Environmentalists of Republic of Srpska, November 18-19, Teslić, Republic of Srpska, Bosnia and Herzegovina. 2016;:125-129.
https://hdl.handle.net/21.15107/rcub_cer_6612 .

Pavlović, Miomir, Pavlović, Miroslav, Pantović Pavlović, Marijana, Janković, Zoran, Fuchs-Godec, Regina, Malinović, Borislav, "Electroconductive copper powder filled PMMA composites" in Proceedings - XI Conference of Chemists, Technologists and Environmentalists of Republic of Srpska, November 18-19, Teslić, Republic of Srpska, Bosnia and Herzegovina (2016):125-129,
https://hdl.handle.net/21.15107/rcub_cer_6612 .

TY  - CONF
AU  - Pavlović, Miroslav
AU  - Pavlović, Miomir
AU  - Janković, Zoran
AU  - Arsenović, Božidarka
AU  - Fuchs-Godec, Regina
AU  - Nikolić, Nebojša D.
PY  - 2016
UR  - https://cer.ihtm.bg.ac.rs/handle/123456789/6611
AB  - U ovom radu su prikazani eksperimentalni rezultati ispitivanja kompozitnih materijala na bazi lignoceluloznih (LC) i polimetilmetakrilatnih (PMMA) matrica punjenih bakarnim prahom. Zapreminski udeli metalnog punioca su varirani u opsegu od 0.5-29.8% (v/v), a uzorci su pripremljeni hladnim presovanjem i izlivanjem u kalup. Karakterizacija je uključivala ispitivanje uticaja veličine čestica i morfologije na provodnost i perkolacioni prag kompozita koristeći različite tehnike ispitivanja: SEM, TGA, AFM. Termalna analiza pripremljenih kompozita je pokazala poboljšanje termičkih svojstava kompozita u odnosu na čiste polimere. Ovo poboljšanje se javlja usled prisustva metalnog punioca, koji je jako dobar termički provodnik, te se toplota emitovana tokom TGA merenja prvenstveno akumulira u puniocu, pa tek onda u polimernoj matrici, bila ona LC ili PMMA. Prisustvo trodimenzionalnih provodnih puteva je takođe potvrđeno.
AB  - In this manuscript the results of experimental studies of the properties of composite materials based on lignocellulosic (LC) and poly(methylmethacrylate) matrices filled with electrolytic copper powder are presented. Volume fractions of metal fillers in composite materials and tested samples were varied in the range of 0.5-29.8% (v/v), and the samples were prepared by compression and molding. Characterization included examination of the conductivity and percolation threshold of the composites using a variety of testing techniques: SEM, TGA, AFM. Thermal analysis of the prepared composites showed the improvement of the thermal characteristics of the composites. This was due to the presence of the metallic fillers, which are very good thermal conductors, hence accumulating the heat emitted during TGA measurements primary to matrix, whether it was lignocellulosic or PMMA. presence of three dimensional conductive pathways was confirmed.
PB  - Podgorica, Crna Gora : Crnogorsko društvo za koroziju, zaštitu materijala i zaštitu životne sredine / Podgorica, Montenegro : Montenegrin society for corrosion, material and environment protection
C3  - Proceedings - Third international symposium on corrosion and protection of materials and environment, October 12-15, Bar, Montenegro
T1  - Conductivity of copper filled composites with different polymer matrices
T1  - Provodnost kompozita sa različitim matricama punjenih bakrom
SP  - 51
EP  - 56
UR  - https://hdl.handle.net/21.15107/rcub_cer_6611
ER  - 

@conference{
author = "Pavlović, Miroslav and Pavlović, Miomir and Janković, Zoran and Arsenović, Božidarka and Fuchs-Godec, Regina and Nikolić, Nebojša D.",
year = "2016",
abstract = "U ovom radu su prikazani eksperimentalni rezultati ispitivanja kompozitnih materijala na bazi lignoceluloznih (LC) i polimetilmetakrilatnih (PMMA) matrica punjenih bakarnim prahom. Zapreminski udeli metalnog punioca su varirani u opsegu od 0.5-29.8% (v/v), a uzorci su pripremljeni hladnim presovanjem i izlivanjem u kalup. Karakterizacija je uključivala ispitivanje uticaja veličine čestica i morfologije na provodnost i perkolacioni prag kompozita koristeći različite tehnike ispitivanja: SEM, TGA, AFM. Termalna analiza pripremljenih kompozita je pokazala poboljšanje termičkih svojstava kompozita u odnosu na čiste polimere. Ovo poboljšanje se javlja usled prisustva metalnog punioca, koji je jako dobar termički provodnik, te se toplota emitovana tokom TGA merenja prvenstveno akumulira u puniocu, pa tek onda u polimernoj matrici, bila ona LC ili PMMA. Prisustvo trodimenzionalnih provodnih puteva je takođe potvrđeno., In this manuscript the results of experimental studies of the properties of composite materials based on lignocellulosic (LC) and poly(methylmethacrylate) matrices filled with electrolytic copper powder are presented. Volume fractions of metal fillers in composite materials and tested samples were varied in the range of 0.5-29.8% (v/v), and the samples were prepared by compression and molding. Characterization included examination of the conductivity and percolation threshold of the composites using a variety of testing techniques: SEM, TGA, AFM. Thermal analysis of the prepared composites showed the improvement of the thermal characteristics of the composites. This was due to the presence of the metallic fillers, which are very good thermal conductors, hence accumulating the heat emitted during TGA measurements primary to matrix, whether it was lignocellulosic or PMMA. presence of three dimensional conductive pathways was confirmed.",
publisher = "Podgorica, Crna Gora : Crnogorsko društvo za koroziju, zaštitu materijala i zaštitu životne sredine / Podgorica, Montenegro : Montenegrin society for corrosion, material and environment protection",
journal = "Proceedings - Third international symposium on corrosion and protection of materials and environment, October 12-15, Bar, Montenegro",
title = "Conductivity of copper filled composites with different polymer matrices, Provodnost kompozita sa različitim matricama punjenih bakrom",
pages = "51-56",
url = "https://hdl.handle.net/21.15107/rcub_cer_6611"
}

Pavlović, M., Pavlović, M., Janković, Z., Arsenović, B., Fuchs-Godec, R.,& Nikolić, N. D.. (2016). Conductivity of copper filled composites with different polymer matrices. in Proceedings - Third international symposium on corrosion and protection of materials and environment, October 12-15, Bar, Montenegro
Podgorica, Crna Gora : Crnogorsko društvo za koroziju, zaštitu materijala i zaštitu životne sredine / Podgorica, Montenegro : Montenegrin society for corrosion, material and environment protection., 51-56.
https://hdl.handle.net/21.15107/rcub_cer_6611

Pavlović M, Pavlović M, Janković Z, Arsenović B, Fuchs-Godec R, Nikolić ND. Conductivity of copper filled composites with different polymer matrices. in Proceedings - Third international symposium on corrosion and protection of materials and environment, October 12-15, Bar, Montenegro. 2016;:51-56.
https://hdl.handle.net/21.15107/rcub_cer_6611 .

Pavlović, Miroslav, Pavlović, Miomir, Janković, Zoran, Arsenović, Božidarka, Fuchs-Godec, Regina, Nikolić, Nebojša D., "Conductivity of copper filled composites with different polymer matrices" in Proceedings - Third international symposium on corrosion and protection of materials and environment, October 12-15, Bar, Montenegro (2016):51-56,
https://hdl.handle.net/21.15107/rcub_cer_6611 .

TY  - CONF
AU  - Riđošić, Marija
AU  - Tomić, Milorad
AU  - Fuchs-Godec, Regina
AU  - Pavlović, Miroslav
AU  - Pavlović, Miomir
AU  - Mićić, Vladan
PY  - 2016
UR  - https://cer.ihtm.bg.ac.rs/handle/123456789/6564
AB  - Zbog sve veće brige stručne i naučne javnosti o zaštiti životne sredine došlo je do upotrebe ekološki prihvatljivih inhibitora za zaštitu metala od korozije. U ovom radu izvršeno je ispitivanje zaštite bakra obradom korozione sredine primenom različitih koncentracija ekstrakta žalfije 0.5g/dm3,1 g/dm3 i 1.5g/dm3, kao zelenog inhibitora, u rastvoru 3% NaCl. Merenja su izvedena gravimetrijskom metodom i elektrohemijskim metodama (Tafelovom metodom ekstrapolacije i spektroskopijom elektrohemijske impedanse). Najveće dostignute vrednosti zaštitnog faktora ekstrakta žalfije su 60,04% u rastvoru 3%NaCl + 1 g/dm3 i 53% u rastvoru 3%NaCl + 1,5 g/dm3 u vremenskom intervalu od 6 sati. Međutim, isti rastvori u vremenskom intervalu od 4 i 24 h deluju katalitički na proces korozije bakra, te se ekstrakt žalfije ne može preporučiti kao inhibitor korozije bakra u 3%NaCl. Rezultati dobijeni spektroskopijom elektrohemijske impedanse i rezultati dobijeni sa snimljenih Tafelovih polarizacionih dijagrama potvrđuju rezultate dobijene gravimetrijskom metodom, te se mogu preporučiti kao vrlo pouzdane metode za brza koroziona ispitivanja.
AB  - Due to the increasing concern of experts and scientists on environmental protection use of environmentally friendly corrosion inhibitors for metal protection gains more interest. In this paper, research on copper protection by processing corrosive environment while applying different concentrations of sage extract of 0.5g/dm3,1 g/dm3 i 1.5g/dm3 as green inhibitor in 3% NaCl solution was performed. Measurements were carried out by gravimetric method and electrochemical methods (Tafel extrapolation method and electrochemical impedance spectroscopy). The greatest protective values of sage extract of 60,04% were reached in 3%NaCl + 1 g/dm3 solution and 53% 3%NaCl + 1,5 g/dm3 solution in 6 hours interval. However, the same solutions act catalytically on copper corrosion process during time interval from 4 to 24 hours, that is why sage extract can not be recommended as inhibitor of copper corrosion in 3%NaCl. The results obtained by electrochemical impedance spectroscopy and recorded Tafel polarization diagrams, confirm results attained by gravimetric method, thus can be recommended as very reliable methods for quick corrosion tests.
PB  - Belgrade, Serbia : Serbian Society of Corrosion and Materials Protection (UISKOZAM) / Beograd, Srbija : Udruženje inženjera Srbije za koroziju i zaštitu materijala (UISKOZAM)
C3  - Proceedings - XVIII YuCorr International Conference, Meeting Point of the Science and Practice in the Fields of Corrosion, Materials and Environmental Protection, April 12-15, Tara Mountain, Serbia
T1  - Ekstrakt žalfije kao inhibitor korozije bakra u 3% NaCl
T1  - Sage extract as inhibitor of copper corrosion in 3% NaCl
SP  - 132
EP  - 140
UR  - https://hdl.handle.net/21.15107/rcub_cer_6564
ER  - 

@conference{
author = "Riđošić, Marija and Tomić, Milorad and Fuchs-Godec, Regina and Pavlović, Miroslav and Pavlović, Miomir and Mićić, Vladan",
year = "2016",
abstract = "Zbog sve veće brige stručne i naučne javnosti o zaštiti životne sredine došlo je do upotrebe ekološki prihvatljivih inhibitora za zaštitu metala od korozije. U ovom radu izvršeno je ispitivanje zaštite bakra obradom korozione sredine primenom različitih koncentracija ekstrakta žalfije 0.5g/dm3,1 g/dm3 i 1.5g/dm3, kao zelenog inhibitora, u rastvoru 3% NaCl. Merenja su izvedena gravimetrijskom metodom i elektrohemijskim metodama (Tafelovom metodom ekstrapolacije i spektroskopijom elektrohemijske impedanse). Najveće dostignute vrednosti zaštitnog faktora ekstrakta žalfije su 60,04% u rastvoru 3%NaCl + 1 g/dm3 i 53% u rastvoru 3%NaCl + 1,5 g/dm3 u vremenskom intervalu od 6 sati. Međutim, isti rastvori u vremenskom intervalu od 4 i 24 h deluju katalitički na proces korozije bakra, te se ekstrakt žalfije ne može preporučiti kao inhibitor korozije bakra u 3%NaCl. Rezultati dobijeni spektroskopijom elektrohemijske impedanse i rezultati dobijeni sa snimljenih Tafelovih polarizacionih dijagrama potvrđuju rezultate dobijene gravimetrijskom metodom, te se mogu preporučiti kao vrlo pouzdane metode za brza koroziona ispitivanja., Due to the increasing concern of experts and scientists on environmental protection use of environmentally friendly corrosion inhibitors for metal protection gains more interest. In this paper, research on copper protection by processing corrosive environment while applying different concentrations of sage extract of 0.5g/dm3,1 g/dm3 i 1.5g/dm3 as green inhibitor in 3% NaCl solution was performed. Measurements were carried out by gravimetric method and electrochemical methods (Tafel extrapolation method and electrochemical impedance spectroscopy). The greatest protective values of sage extract of 60,04% were reached in 3%NaCl + 1 g/dm3 solution and 53% 3%NaCl + 1,5 g/dm3 solution in 6 hours interval. However, the same solutions act catalytically on copper corrosion process during time interval from 4 to 24 hours, that is why sage extract can not be recommended as inhibitor of copper corrosion in 3%NaCl. The results obtained by electrochemical impedance spectroscopy and recorded Tafel polarization diagrams, confirm results attained by gravimetric method, thus can be recommended as very reliable methods for quick corrosion tests.",
publisher = "Belgrade, Serbia : Serbian Society of Corrosion and Materials Protection (UISKOZAM) / Beograd, Srbija : Udruženje inženjera Srbije za koroziju i zaštitu materijala (UISKOZAM)",
journal = "Proceedings - XVIII YuCorr International Conference, Meeting Point of the Science and Practice in the Fields of Corrosion, Materials and Environmental Protection, April 12-15, Tara Mountain, Serbia",
title = "Ekstrakt žalfije kao inhibitor korozije bakra u 3% NaCl, Sage extract as inhibitor of copper corrosion in 3% NaCl",
pages = "132-140",
url = "https://hdl.handle.net/21.15107/rcub_cer_6564"
}

Riđošić, M., Tomić, M., Fuchs-Godec, R., Pavlović, M., Pavlović, M.,& Mićić, V.. (2016). Ekstrakt žalfije kao inhibitor korozije bakra u 3% NaCl. in Proceedings - XVIII YuCorr International Conference, Meeting Point of the Science and Practice in the Fields of Corrosion, Materials and Environmental Protection, April 12-15, Tara Mountain, Serbia
Belgrade, Serbia : Serbian Society of Corrosion and Materials Protection (UISKOZAM) / Beograd, Srbija : Udruženje inženjera Srbije za koroziju i zaštitu materijala (UISKOZAM)., 132-140.
https://hdl.handle.net/21.15107/rcub_cer_6564

Riđošić M, Tomić M, Fuchs-Godec R, Pavlović M, Pavlović M, Mićić V. Ekstrakt žalfije kao inhibitor korozije bakra u 3% NaCl. in Proceedings - XVIII YuCorr International Conference, Meeting Point of the Science and Practice in the Fields of Corrosion, Materials and Environmental Protection, April 12-15, Tara Mountain, Serbia. 2016;:132-140.
https://hdl.handle.net/21.15107/rcub_cer_6564 .

Riđošić, Marija, Tomić, Milorad, Fuchs-Godec, Regina, Pavlović, Miroslav, Pavlović, Miomir, Mićić, Vladan, "Ekstrakt žalfije kao inhibitor korozije bakra u 3% NaCl" in Proceedings - XVIII YuCorr International Conference, Meeting Point of the Science and Practice in the Fields of Corrosion, Materials and Environmental Protection, April 12-15, Tara Mountain, Serbia (2016):132-140,
https://hdl.handle.net/21.15107/rcub_cer_6564 .

TY  - JOUR
AU  - Fuchs-Godec, Regina
AU  - Pavlović, Miomir
AU  - Tomić, Milorad V.
PY  - 2016
UR  - https://cer.ihtm.bg.ac.rs/handle/123456789/1875
AB  - The potentiostatic method and the theory of 'topochemical reactions' in the kinetics of the active dissolution and passivation process of AISI 420 stainless steel were studied. It was found that, to a great extent, the number of conversion steps is depended on the imposed potential. The experimentally obtained results were partially explained using Okamoto's theory of passivation.
AB  - Ispitivana je potenciostatska metoda i teorija 'topohemijskih reakcija' u kinetici aktivnih procesa rastvaranja i pasivacije AISI 420 nerđajućeg čelika. Pokazano je da, u velikoj meri, broj stepena konverzije zavisi od primenjenog potencijala. Eksperimentalno dobijeni rezultati su delimično objašnjeni Okamotovom teorijom pasivacije.
PB  - Belgrade, Serbia : Engineering Society for Corrosion
T2  - Zaštita materijala
T1  - The kinetics of passivation based on the reduction of current density under potentiostatic conditions for a martensitic stainless steel
T1  - Kinetika pasivizacije bazirane na redukciji gustine struje pri potenciostatskim uslovima za martenzitni nerđajući čelik
VL  - 57
IS  - 1
SP  - 26
EP  - 32
DO  - 10.5937/ZasMat1601026f
ER  - 

@article{
author = "Fuchs-Godec, Regina and Pavlović, Miomir and Tomić, Milorad V.",
year = "2016",
abstract = "The potentiostatic method and the theory of 'topochemical reactions' in the kinetics of the active dissolution and passivation process of AISI 420 stainless steel were studied. It was found that, to a great extent, the number of conversion steps is depended on the imposed potential. The experimentally obtained results were partially explained using Okamoto's theory of passivation., Ispitivana je potenciostatska metoda i teorija 'topohemijskih reakcija' u kinetici aktivnih procesa rastvaranja i pasivacije AISI 420 nerđajućeg čelika. Pokazano je da, u velikoj meri, broj stepena konverzije zavisi od primenjenog potencijala. Eksperimentalno dobijeni rezultati su delimično objašnjeni Okamotovom teorijom pasivacije.",
publisher = "Belgrade, Serbia : Engineering Society for Corrosion",
journal = "Zaštita materijala",
title = "The kinetics of passivation based on the reduction of current density under potentiostatic conditions for a martensitic stainless steel, Kinetika pasivizacije bazirane na redukciji gustine struje pri potenciostatskim uslovima za martenzitni nerđajući čelik",
volume = "57",
number = "1",
pages = "26-32",
doi = "10.5937/ZasMat1601026f"
}

Fuchs-Godec, R., Pavlović, M.,& Tomić, M. V.. (2016). The kinetics of passivation based on the reduction of current density under potentiostatic conditions for a martensitic stainless steel. in Zaštita materijala
Belgrade, Serbia : Engineering Society for Corrosion., 57(1), 26-32.
https://doi.org/10.5937/ZasMat1601026f

Fuchs-Godec R, Pavlović M, Tomić MV. The kinetics of passivation based on the reduction of current density under potentiostatic conditions for a martensitic stainless steel. in Zaštita materijala. 2016;57(1):26-32.
doi:10.5937/ZasMat1601026f .

Fuchs-Godec, Regina, Pavlović, Miomir, Tomić, Milorad V., "The kinetics of passivation based on the reduction of current density under potentiostatic conditions for a martensitic stainless steel" in Zaštita materijala, 57, no. 1 (2016):26-32,
https://doi.org/10.5937/ZasMat1601026f . .

TY  - JOUR
AU  - Fuchs-Godec, Regina
AU  - Pavlović, Miomir
AU  - Tomić, Milorad V.
PY  - 2015
UR  - https://cer.ihtm.bg.ac.rs/handle/123456789/1808
AB  - The inhibitive behaviour of Vitamin C, as a type of green inhibitor, on the corrosive behaviour of stainless-steel (SS) X4Cr13 within an aqueous solution of hydrochloric acid (HCl) was studied at concentration of c= (0.01, 0.1 and 1.0) mol L-1. Potentiodynamic polarization and electrochemical impedance spectroscopy (EIS), was used for the measurements at 25 degrees C. To observe the morphology and microstructures of sample surfaces, after the electrochemical measurements a Scanning electron microscopy (SEM) was used. On the basis of the EDAX analysis within the solution of hydrochloric acid (0.01 mol L-1) with addition of Vitamin-C (0.005 mol L-1) the presence of the feri-chelates on the metal surface could be confirmed. The polarization curves revealed that the studied mixtures of the chosen inhibitor represented mixed-type of the inhibitor. The results show that the inhibition efficiency increases with the increase of the inhibitor concentration. This valid especially in the case of the lowest concentration of HCl (c= 0.01 mol L-1). In addition to this at higher HCl concentration (c= 1.0 mol L-1) the immersion time has a noticeable influence on the inhibitive response. Furthermore, the results obtained in this study showed that the inhibitory effect of Vitamin-C to a great extent on electrode potential.
PB  - Electrochemical Science Group
T2  - International Journal of Electrochemical Science
T1  - The Inhibitive Effect of Vitamin-C on the Corrosive Performance of Steel in HCl Solutions - Part II
VL  - 10
IS  - 12
SP  - 10502
EP  - 10512
UR  - https://hdl.handle.net/21.15107/rcub_cer_1808
ER  - 

@article{
author = "Fuchs-Godec, Regina and Pavlović, Miomir and Tomić, Milorad V.",
year = "2015",
abstract = "The inhibitive behaviour of Vitamin C, as a type of green inhibitor, on the corrosive behaviour of stainless-steel (SS) X4Cr13 within an aqueous solution of hydrochloric acid (HCl) was studied at concentration of c= (0.01, 0.1 and 1.0) mol L-1. Potentiodynamic polarization and electrochemical impedance spectroscopy (EIS), was used for the measurements at 25 degrees C. To observe the morphology and microstructures of sample surfaces, after the electrochemical measurements a Scanning electron microscopy (SEM) was used. On the basis of the EDAX analysis within the solution of hydrochloric acid (0.01 mol L-1) with addition of Vitamin-C (0.005 mol L-1) the presence of the feri-chelates on the metal surface could be confirmed. The polarization curves revealed that the studied mixtures of the chosen inhibitor represented mixed-type of the inhibitor. The results show that the inhibition efficiency increases with the increase of the inhibitor concentration. This valid especially in the case of the lowest concentration of HCl (c= 0.01 mol L-1). In addition to this at higher HCl concentration (c= 1.0 mol L-1) the immersion time has a noticeable influence on the inhibitive response. Furthermore, the results obtained in this study showed that the inhibitory effect of Vitamin-C to a great extent on electrode potential.",
publisher = "Electrochemical Science Group",
journal = "International Journal of Electrochemical Science",
title = "The Inhibitive Effect of Vitamin-C on the Corrosive Performance of Steel in HCl Solutions - Part II",
volume = "10",
number = "12",
pages = "10502-10512",
url = "https://hdl.handle.net/21.15107/rcub_cer_1808"
}

Fuchs-Godec, R., Pavlović, M.,& Tomić, M. V.. (2015). The Inhibitive Effect of Vitamin-C on the Corrosive Performance of Steel in HCl Solutions - Part II. in International Journal of Electrochemical Science
Electrochemical Science Group., 10(12), 10502-10512.
https://hdl.handle.net/21.15107/rcub_cer_1808

Fuchs-Godec R, Pavlović M, Tomić MV. The Inhibitive Effect of Vitamin-C on the Corrosive Performance of Steel in HCl Solutions - Part II. in International Journal of Electrochemical Science. 2015;10(12):10502-10512.
https://hdl.handle.net/21.15107/rcub_cer_1808 .

Fuchs-Godec, Regina, Pavlović, Miomir, Tomić, Milorad V., "The Inhibitive Effect of Vitamin-C on the Corrosive Performance of Steel in HCl Solutions - Part II" in International Journal of Electrochemical Science, 10, no. 12 (2015):10502-10512,
https://hdl.handle.net/21.15107/rcub_cer_1808 .