TY  - JOUR
AU  - Vuković, Marina
AU  - Dinić, Ivana
AU  - Nikolić, Marko G.
AU  - Marinković, Bojan A.
AU  - Costa, Antonio Mario Leal Martins
AU  - Radulović, Katarina
AU  - Milošević, Olivera
AU  - Mančić, Lidija
PY  - 2020
UR  - https://doi.org/10.1007/s12034-019-1975-1
UR  - http://dais.sanu.ac.rs/123456789/6911
UR  - https://cer.ihtm.bg.ac.rs/handle/123456789/3324
AB  - Up-converting NaYF4:Yb,Er nanoparticles were obtained by polymer-assisted solvothermal synthesis using a common solution of hydrated RE nitrates in ethanol or ethylene glycol. It was shown that polymer choice (polyacrylic acid—PAA, polyvinylpyrrolidone—PVP and chitosan—CS) controls the size and shape of NaYF4:Yb,Er nanoparticles, while the solvent type and pH value affect their crystallinity. Consequently, the spherical nanoparticles of a cubic (α) phase, the average size of which ranged from 60 to 140 nm, were obtained either when PVP/ethanol or PVP/ethylene glycol were used solely during synthesis, whereas NaOH addition induced hexagonal (β) phase nucleation. The formation of the hierarchically organized spherical aggregates and nanofoils was observed when CS and PAA were used during synthesis, respectively. The average crystallite size, microstrain, doping level, lattice parameters, as well as, the presence of the certain ligands on the particle surface were determined and correlated with the intensity of visible-light emission observed under 980 nm laser-diode excitation.
PB  - Springer
T2  - Bulletin of Materials Science
T1  - Effects of different polymers and solvents on crystallization of the NaYF4:Yb/Er phase
VL  - 43
IS  - 1
SP  - 2
DO  - 10.1007/s12034-019-1975-1
ER  - 

@article{
author = "Vuković, Marina and Dinić, Ivana and Nikolić, Marko G. and Marinković, Bojan A. and Costa, Antonio Mario Leal Martins and Radulović, Katarina and Milošević, Olivera and Mančić, Lidija",
year = "2020",
abstract = "Up-converting NaYF4:Yb,Er nanoparticles were obtained by polymer-assisted solvothermal synthesis using a common solution of hydrated RE nitrates in ethanol or ethylene glycol. It was shown that polymer choice (polyacrylic acid—PAA, polyvinylpyrrolidone—PVP and chitosan—CS) controls the size and shape of NaYF4:Yb,Er nanoparticles, while the solvent type and pH value affect their crystallinity. Consequently, the spherical nanoparticles of a cubic (α) phase, the average size of which ranged from 60 to 140 nm, were obtained either when PVP/ethanol or PVP/ethylene glycol were used solely during synthesis, whereas NaOH addition induced hexagonal (β) phase nucleation. The formation of the hierarchically organized spherical aggregates and nanofoils was observed when CS and PAA were used during synthesis, respectively. The average crystallite size, microstrain, doping level, lattice parameters, as well as, the presence of the certain ligands on the particle surface were determined and correlated with the intensity of visible-light emission observed under 980 nm laser-diode excitation.",
publisher = "Springer",
journal = "Bulletin of Materials Science",
title = "Effects of different polymers and solvents on crystallization of the NaYF4:Yb/Er phase",
volume = "43",
number = "1",
pages = "2",
doi = "10.1007/s12034-019-1975-1"
}

Vuković, M., Dinić, I., Nikolić, M. G., Marinković, B. A., Costa, A. M. L. M., Radulović, K., Milošević, O.,& Mančić, L.. (2020). Effects of different polymers and solvents on crystallization of the NaYF4:Yb/Er phase. in Bulletin of Materials Science
Springer., 43(1), 2.
https://doi.org/10.1007/s12034-019-1975-1

Vuković M, Dinić I, Nikolić MG, Marinković BA, Costa AMLM, Radulović K, Milošević O, Mančić L. Effects of different polymers and solvents on crystallization of the NaYF4:Yb/Er phase. in Bulletin of Materials Science. 2020;43(1):2.
doi:10.1007/s12034-019-1975-1 .

Vuković, Marina, Dinić, Ivana, Nikolić, Marko G., Marinković, Bojan A., Costa, Antonio Mario Leal Martins, Radulović, Katarina, Milošević, Olivera, Mančić, Lidija, "Effects of different polymers and solvents on crystallization of the NaYF4:Yb/Er phase" in Bulletin of Materials Science, 43, no. 1 (2020):2,
https://doi.org/10.1007/s12034-019-1975-1 . .

TY  - JOUR
AU  - Vuković, Marina
AU  - Dinić, Ivana
AU  - Nikolić, Marko G.
AU  - Marinković, Bojan A.
AU  - Costa, Antonio Mario Leal Martins
AU  - Radulović, Katarina
AU  - Milošević, Olivera
AU  - Mančić, Lidija
PY  - 2020
UR  - https://doi.org/10.1007/s12034-019-1975-1
UR  - http://dais.sanu.ac.rs/123456789/6912
UR  - https://cer.ihtm.bg.ac.rs/handle/123456789/3323
AB  - Up-converting NaYF4:Yb,Er nanoparticles were obtained by polymer-assisted solvothermal synthesis using a common solution of hydrated RE nitrates in ethanol or ethylene glycol. It was shown that polymer choice (polyacrylic acid—PAA, polyvinylpyrrolidone—PVP and chitosan—CS) controls the size and shape of NaYF4:Yb,Er nanoparticles, while the solvent type and pH value affect their crystallinity. Consequently, the spherical nanoparticles of a cubic (α) phase, the average size of which ranged from 60 to 140 nm, were obtained either when PVP/ethanol or PVP/ethylene glycol were used solely during synthesis, whereas NaOH addition induced hexagonal (β) phase nucleation. The formation of the hierarchically organized spherical aggregates and nanofoils was observed when CS and PAA were used during synthesis, respectively. The average crystallite size, microstrain, doping level, lattice parameters, as well as, the presence of the certain ligands on the particle surface were determined and correlated with the intensity of visible-light emission observed under 980 nm laser-diode excitation.
PB  - Springer
T2  - Bulletin of Materials Science
T1  - Effects of different polymers and solvents on crystallization of the NaYF4:Yb/Er phase
VL  - 43
IS  - 1
SP  - 2
DO  - 10.1007/s12034-019-1975-1
ER  - 

@article{
author = "Vuković, Marina and Dinić, Ivana and Nikolić, Marko G. and Marinković, Bojan A. and Costa, Antonio Mario Leal Martins and Radulović, Katarina and Milošević, Olivera and Mančić, Lidija",
year = "2020",
abstract = "Up-converting NaYF4:Yb,Er nanoparticles were obtained by polymer-assisted solvothermal synthesis using a common solution of hydrated RE nitrates in ethanol or ethylene glycol. It was shown that polymer choice (polyacrylic acid—PAA, polyvinylpyrrolidone—PVP and chitosan—CS) controls the size and shape of NaYF4:Yb,Er nanoparticles, while the solvent type and pH value affect their crystallinity. Consequently, the spherical nanoparticles of a cubic (α) phase, the average size of which ranged from 60 to 140 nm, were obtained either when PVP/ethanol or PVP/ethylene glycol were used solely during synthesis, whereas NaOH addition induced hexagonal (β) phase nucleation. The formation of the hierarchically organized spherical aggregates and nanofoils was observed when CS and PAA were used during synthesis, respectively. The average crystallite size, microstrain, doping level, lattice parameters, as well as, the presence of the certain ligands on the particle surface were determined and correlated with the intensity of visible-light emission observed under 980 nm laser-diode excitation.",
publisher = "Springer",
journal = "Bulletin of Materials Science",
title = "Effects of different polymers and solvents on crystallization of the NaYF4:Yb/Er phase",
volume = "43",
number = "1",
pages = "2",
doi = "10.1007/s12034-019-1975-1"
}

Vuković, M., Dinić, I., Nikolić, M. G., Marinković, B. A., Costa, A. M. L. M., Radulović, K., Milošević, O.,& Mančić, L.. (2020). Effects of different polymers and solvents on crystallization of the NaYF4:Yb/Er phase. in Bulletin of Materials Science
Springer., 43(1), 2.
https://doi.org/10.1007/s12034-019-1975-1

Vuković M, Dinić I, Nikolić MG, Marinković BA, Costa AMLM, Radulović K, Milošević O, Mančić L. Effects of different polymers and solvents on crystallization of the NaYF4:Yb/Er phase. in Bulletin of Materials Science. 2020;43(1):2.
doi:10.1007/s12034-019-1975-1 .

Vuković, Marina, Dinić, Ivana, Nikolić, Marko G., Marinković, Bojan A., Costa, Antonio Mario Leal Martins, Radulović, Katarina, Milošević, Olivera, Mančić, Lidija, "Effects of different polymers and solvents on crystallization of the NaYF4:Yb/Er phase" in Bulletin of Materials Science, 43, no. 1 (2020):2,
https://doi.org/10.1007/s12034-019-1975-1 . .

TY  - CONF
AU  - Dinić, Ivana
AU  - Mančić, Lidija
AU  - Nikolić, Marko G.
AU  - Radulović, Katarina
AU  - Marinković, Bojan A.
AU  - Milošević, Olivera
PY  - 2017
UR  - http://dais.sanu.ac.rs/123456789/2361
UR  - https://cer.ihtm.bg.ac.rs/handle/123456789/2849
AB  - Over the last decade, solvothermal decomposition of organometallic compounds has been indicated as one of the most convenient method for the synthesis of monodisperse lanthanide doped upconverting fluorides. Due to their hydrophobic nature such particles could not be used for a conjugation of the molecular targeting agents which is necessary for optical imaging of biological tissues. In this work, hydrophilic NaYF4:Yb,Er (17 mol% Yb; 3mol% Er) nanoparticles were synthesized by facile one-pot hydrothermal synthesis performed with a help of chitosan (CS) and poly(acrylic acid) (PAA). Obtained powders were analyzed by X-ray powder diffraction (XRPD), field emission scanning electron microscopy (FESEM), Fourier transform infrared (FTIR) and photoluminescence (PL) spectroscopy. The obtained results implied that particle size, shape and surface characteristics are dependent on the polymer choice. Although both powders crystallize in the same crystal arrangement (cubic, Fm-3m) more intense red emission, assigned to the Er3+ 4F9/2 → 4I15/2 electronic transitions, characterize spherical NaYF4:Yb,Er@CS particles. To asses a biological safety of their use, viability of the human gingival fibroblasts (HFG) was additionally tested by a colorimetric MTT assay.
PB  - Belgrade : Serbian Ceramic Society
C3  - Program and the Book of Abstracts / Serbian Ceramic Society Conference Advanced Ceramics and Application VI: New Frontiers in Multifunctional Material Science and Processing, Serbia, Belgrade, September 18-20, 2017
T1  - Facile synthesis of hydrophilic polymer-capped upconverting NaYF4:Yb,Er particles
SP  - 67
EP  - 67
UR  - https://hdl.handle.net/21.15107/rcub_dais_2361
ER  - 

@conference{
author = "Dinić, Ivana and Mančić, Lidija and Nikolić, Marko G. and Radulović, Katarina and Marinković, Bojan A. and Milošević, Olivera",
year = "2017",
abstract = "Over the last decade, solvothermal decomposition of organometallic compounds has been indicated as one of the most convenient method for the synthesis of monodisperse lanthanide doped upconverting fluorides. Due to their hydrophobic nature such particles could not be used for a conjugation of the molecular targeting agents which is necessary for optical imaging of biological tissues. In this work, hydrophilic NaYF4:Yb,Er (17 mol% Yb; 3mol% Er) nanoparticles were synthesized by facile one-pot hydrothermal synthesis performed with a help of chitosan (CS) and poly(acrylic acid) (PAA). Obtained powders were analyzed by X-ray powder diffraction (XRPD), field emission scanning electron microscopy (FESEM), Fourier transform infrared (FTIR) and photoluminescence (PL) spectroscopy. The obtained results implied that particle size, shape and surface characteristics are dependent on the polymer choice. Although both powders crystallize in the same crystal arrangement (cubic, Fm-3m) more intense red emission, assigned to the Er3+ 4F9/2 → 4I15/2 electronic transitions, characterize spherical NaYF4:Yb,Er@CS particles. To asses a biological safety of their use, viability of the human gingival fibroblasts (HFG) was additionally tested by a colorimetric MTT assay.",
publisher = "Belgrade : Serbian Ceramic Society",
journal = "Program and the Book of Abstracts / Serbian Ceramic Society Conference Advanced Ceramics and Application VI: New Frontiers in Multifunctional Material Science and Processing, Serbia, Belgrade, September 18-20, 2017",
title = "Facile synthesis of hydrophilic polymer-capped upconverting NaYF4:Yb,Er particles",
pages = "67-67",
url = "https://hdl.handle.net/21.15107/rcub_dais_2361"
}

Dinić, I., Mančić, L., Nikolić, M. G., Radulović, K., Marinković, B. A.,& Milošević, O.. (2017). Facile synthesis of hydrophilic polymer-capped upconverting NaYF4:Yb,Er particles. in Program and the Book of Abstracts / Serbian Ceramic Society Conference Advanced Ceramics and Application VI: New Frontiers in Multifunctional Material Science and Processing, Serbia, Belgrade, September 18-20, 2017
Belgrade : Serbian Ceramic Society., 67-67.
https://hdl.handle.net/21.15107/rcub_dais_2361

Dinić I, Mančić L, Nikolić MG, Radulović K, Marinković BA, Milošević O. Facile synthesis of hydrophilic polymer-capped upconverting NaYF4:Yb,Er particles. in Program and the Book of Abstracts / Serbian Ceramic Society Conference Advanced Ceramics and Application VI: New Frontiers in Multifunctional Material Science and Processing, Serbia, Belgrade, September 18-20, 2017. 2017;:67-67.
https://hdl.handle.net/21.15107/rcub_dais_2361 .

Dinić, Ivana, Mančić, Lidija, Nikolić, Marko G., Radulović, Katarina, Marinković, Bojan A., Milošević, Olivera, "Facile synthesis of hydrophilic polymer-capped upconverting NaYF4:Yb,Er particles" in Program and the Book of Abstracts / Serbian Ceramic Society Conference Advanced Ceramics and Application VI: New Frontiers in Multifunctional Material Science and Processing, Serbia, Belgrade, September 18-20, 2017 (2017):67-67,
https://hdl.handle.net/21.15107/rcub_dais_2361 .

TY  - JOUR
AU  - Marković, Smilja B.
AU  - Stankovic, Ana
AU  - Dostanić, Jasmina
AU  - Veselinović, Ljiljana
AU  - Mančić, Lidija
AU  - Skapin, Sreco Davor
AU  - Drazic, Goran
AU  - Janković-Častvan, Ivona
AU  - Uskoković, Dragan P.
PY  - 2017
UR  - https://cer.ihtm.bg.ac.rs/handle/123456789/2169
AB  - Mechanical milling of commercial ZnO and SnO2 was used to produce a ZnO/SnO2 composite with a high density of surface defects; in particular, zinc interstitials (Zni) and oxygen vacancies (VO). To determine the impact of surface defects on photocatalytic activity, the relative concentration ratio of bulk defects to surface defects was modified by annealing at 400 and 700 degrees C. The possible application of the ZnO/SnO2 composite as a natural sunlight and UV- light driven photocatalyst was revealed via de-colorization of methylene blue. In both cases the ZnO/SnO2 composite exhibited enhanced photocatalytic activity as compared to the pristine ZnO. In order to investigate the origin of the enhancement, the pristine metal oxides and composites were characterized using a variety of techniques, including X-ray diffraction (XRD), Raman and Fourier transform infrared (FTIR) spectroscopy, field emission scanning electron microscopy (FESEM), laser diffraction particle size analysis, Brunauer-Emmett-Teller, UV-Vis diffuse reflectance and photoluminescence spectroscopy. High-resolution transmission electron microscopy (HRTEM) and elemental mapping analyses were used to reveal the presence of SnO2 nanocrystallites on the surface of larger ZnO particles. The enhanced photocatalytic activity of the composite can be attributed to the synergetic effect of the surface defects and the ZnO/SnO2 heterojunction particles, which facilitated charge separation, thereby hindering the recombination of photogenerated carriers. This study draws attention to mechanical activation as an inexpensive and environmentally friendly technique for the large-scale production of the composite with an enhanced photocatalytic activity under illumination of either UV or sunlight.
PB  - The Royal Society of Chemistry
T2  - RSC Advances
T1  - Simultaneous enhancement of natural sunlightand artificial UV-driven photocatalytic activity of a mechanically activated ZnO/SnO2 composite
VL  - 7
IS  - 68
SP  - 42725
EP  - 42737
DO  - 10.1039/c7ra06895f
ER  - 

@article{
author = "Marković, Smilja B. and Stankovic, Ana and Dostanić, Jasmina and Veselinović, Ljiljana and Mančić, Lidija and Skapin, Sreco Davor and Drazic, Goran and Janković-Častvan, Ivona and Uskoković, Dragan P.",
year = "2017",
abstract = "Mechanical milling of commercial ZnO and SnO2 was used to produce a ZnO/SnO2 composite with a high density of surface defects; in particular, zinc interstitials (Zni) and oxygen vacancies (VO). To determine the impact of surface defects on photocatalytic activity, the relative concentration ratio of bulk defects to surface defects was modified by annealing at 400 and 700 degrees C. The possible application of the ZnO/SnO2 composite as a natural sunlight and UV- light driven photocatalyst was revealed via de-colorization of methylene blue. In both cases the ZnO/SnO2 composite exhibited enhanced photocatalytic activity as compared to the pristine ZnO. In order to investigate the origin of the enhancement, the pristine metal oxides and composites were characterized using a variety of techniques, including X-ray diffraction (XRD), Raman and Fourier transform infrared (FTIR) spectroscopy, field emission scanning electron microscopy (FESEM), laser diffraction particle size analysis, Brunauer-Emmett-Teller, UV-Vis diffuse reflectance and photoluminescence spectroscopy. High-resolution transmission electron microscopy (HRTEM) and elemental mapping analyses were used to reveal the presence of SnO2 nanocrystallites on the surface of larger ZnO particles. The enhanced photocatalytic activity of the composite can be attributed to the synergetic effect of the surface defects and the ZnO/SnO2 heterojunction particles, which facilitated charge separation, thereby hindering the recombination of photogenerated carriers. This study draws attention to mechanical activation as an inexpensive and environmentally friendly technique for the large-scale production of the composite with an enhanced photocatalytic activity under illumination of either UV or sunlight.",
publisher = "The Royal Society of Chemistry",
journal = "RSC Advances",
title = "Simultaneous enhancement of natural sunlightand artificial UV-driven photocatalytic activity of a mechanically activated ZnO/SnO2 composite",
volume = "7",
number = "68",
pages = "42725-42737",
doi = "10.1039/c7ra06895f"
}

Marković, S. B., Stankovic, A., Dostanić, J., Veselinović, L., Mančić, L., Skapin, S. D., Drazic, G., Janković-Častvan, I.,& Uskoković, D. P.. (2017). Simultaneous enhancement of natural sunlightand artificial UV-driven photocatalytic activity of a mechanically activated ZnO/SnO2 composite. in RSC Advances
The Royal Society of Chemistry., 7(68), 42725-42737.
https://doi.org/10.1039/c7ra06895f

Marković SB, Stankovic A, Dostanić J, Veselinović L, Mančić L, Skapin SD, Drazic G, Janković-Častvan I, Uskoković DP. Simultaneous enhancement of natural sunlightand artificial UV-driven photocatalytic activity of a mechanically activated ZnO/SnO2 composite. in RSC Advances. 2017;7(68):42725-42737.
doi:10.1039/c7ra06895f .

Marković, Smilja B., Stankovic, Ana, Dostanić, Jasmina, Veselinović, Ljiljana, Mančić, Lidija, Skapin, Sreco Davor, Drazic, Goran, Janković-Častvan, Ivona, Uskoković, Dragan P., "Simultaneous enhancement of natural sunlightand artificial UV-driven photocatalytic activity of a mechanically activated ZnO/SnO2 composite" in RSC Advances, 7, no. 68 (2017):42725-42737,
https://doi.org/10.1039/c7ra06895f . .

TY  - CONF
AU  - Marković, Smilja B.
AU  - Stanković, Ana
AU  - Dostanić, Jasmina
AU  - Mančić, Lidija
AU  - Škapin, Srečo Davor
AU  - Uskoković, Dragan
PY  - 2017
UR  - http://dais.sanu.ac.rs/123456789/15440
UR  - https://cer.ihtm.bg.ac.rs/handle/123456789/2866
AB  - Over the past four decades there is an increasing interest to develop highly efficient semiconductor photocatalysts for degradation of organic and biological pollutants in water under light irradiation. The semiconductor band gap determines which wavelength of light will be absorbed; precisely, semiconductors with a wide band gap (> 3 eV) can absorb only UV light, while those with a narrow band gap (< 3 eV) can be activated by visible light.In this study we examined structural, morphological, textural and optical properties of ZnO/SnO2 composite as potential photocatalyst. Mechanical activation of commercial ZnO and SnO2 powders has been used to produce a composite with high density of surface defects. To investigate the influence of thermal treatment on the physical properties, and consequently on photoactivity, the composite has been traditionally annealed at 400 and 700 °C. The phase purity, crystal structure and average crystallite size of pristine metal oxides and the composites were investigated by X-ray diffraction and Raman spectroscopy. The particles morphology and size distributions were studied by FE–SEM and laser diffraction particle size analyzer, respectively. The textural properties were determined from N¬2¬ adsorption/desorption experiments, while the optical properties were studied using UV–Vis diffuse reflectance and photoluminescence spectroscopy. Photocatalytic activity of pristine ZnO and ZnO/SnO2 composites were examined via de-colorization of methylene blue under: (1) direct natural sunlight, and (2) artificial UV irradiation. In both cases enhanced photocatalytic activity of ZnO/SnO2 has been found. Enhanced photocatalytic activity can be attributed to the surface defects and to created ZnO/SnO2 heterojunctions which reduced electron-hole recombination time.
PB  - Belgrade : Materials Research Society of Serbia
C3  - Programme and The Book of Abstracts / Nineteenth Annual Conference YUCOMAT 2017, Herceg Novi, September 4-8, 2017
T1  - Enhanced natural sunlight- and artificial UV-driven photocatalytic activity of mechanically activated ZnO/SnO2 composite
SP  - 49
EP  - 49
UR  - https://hdl.handle.net/21.15107/rcub_dais_15440
ER  - 

@conference{
author = "Marković, Smilja B. and Stanković, Ana and Dostanić, Jasmina and Mančić, Lidija and Škapin, Srečo Davor and Uskoković, Dragan",
year = "2017",
abstract = "Over the past four decades there is an increasing interest to develop highly efficient semiconductor photocatalysts for degradation of organic and biological pollutants in water under light irradiation. The semiconductor band gap determines which wavelength of light will be absorbed; precisely, semiconductors with a wide band gap (> 3 eV) can absorb only UV light, while those with a narrow band gap (< 3 eV) can be activated by visible light.In this study we examined structural, morphological, textural and optical properties of ZnO/SnO2 composite as potential photocatalyst. Mechanical activation of commercial ZnO and SnO2 powders has been used to produce a composite with high density of surface defects. To investigate the influence of thermal treatment on the physical properties, and consequently on photoactivity, the composite has been traditionally annealed at 400 and 700 °C. The phase purity, crystal structure and average crystallite size of pristine metal oxides and the composites were investigated by X-ray diffraction and Raman spectroscopy. The particles morphology and size distributions were studied by FE–SEM and laser diffraction particle size analyzer, respectively. The textural properties were determined from N¬2¬ adsorption/desorption experiments, while the optical properties were studied using UV–Vis diffuse reflectance and photoluminescence spectroscopy. Photocatalytic activity of pristine ZnO and ZnO/SnO2 composites were examined via de-colorization of methylene blue under: (1) direct natural sunlight, and (2) artificial UV irradiation. In both cases enhanced photocatalytic activity of ZnO/SnO2 has been found. Enhanced photocatalytic activity can be attributed to the surface defects and to created ZnO/SnO2 heterojunctions which reduced electron-hole recombination time.",
publisher = "Belgrade : Materials Research Society of Serbia",
journal = "Programme and The Book of Abstracts / Nineteenth Annual Conference YUCOMAT 2017, Herceg Novi, September 4-8, 2017",
title = "Enhanced natural sunlight- and artificial UV-driven photocatalytic activity of mechanically activated ZnO/SnO2 composite",
pages = "49-49",
url = "https://hdl.handle.net/21.15107/rcub_dais_15440"
}

Marković, S. B., Stanković, A., Dostanić, J., Mančić, L., Škapin, S. D.,& Uskoković, D.. (2017). Enhanced natural sunlight- and artificial UV-driven photocatalytic activity of mechanically activated ZnO/SnO2 composite. in Programme and The Book of Abstracts / Nineteenth Annual Conference YUCOMAT 2017, Herceg Novi, September 4-8, 2017
Belgrade : Materials Research Society of Serbia., 49-49.
https://hdl.handle.net/21.15107/rcub_dais_15440

Marković SB, Stanković A, Dostanić J, Mančić L, Škapin SD, Uskoković D. Enhanced natural sunlight- and artificial UV-driven photocatalytic activity of mechanically activated ZnO/SnO2 composite. in Programme and The Book of Abstracts / Nineteenth Annual Conference YUCOMAT 2017, Herceg Novi, September 4-8, 2017. 2017;:49-49.
https://hdl.handle.net/21.15107/rcub_dais_15440 .

Marković, Smilja B., Stanković, Ana, Dostanić, Jasmina, Mančić, Lidija, Škapin, Srečo Davor, Uskoković, Dragan, "Enhanced natural sunlight- and artificial UV-driven photocatalytic activity of mechanically activated ZnO/SnO2 composite" in Programme and The Book of Abstracts / Nineteenth Annual Conference YUCOMAT 2017, Herceg Novi, September 4-8, 2017 (2017):49-49,
https://hdl.handle.net/21.15107/rcub_dais_15440 .

TY  - JOUR
AU  - Peleš, Adriana
AU  - Pavlović, Vera P.
AU  - Filipović, Suzana
AU  - Obradovic, Nina
AU  - Mančić, Lidija
AU  - Krstić, Jugoslav
AU  - Mitrić, Miodrag
AU  - Vlahović, Branislav
AU  - Rašić, Goran
AU  - Kosanović, Darko
AU  - Pavlović, Vladimir B.
PY  - 2015
UR  - https://cer.ihtm.bg.ac.rs/handle/123456789/3208
AB  - Commercially available ZnO powder was mechanically activated in a planetary ball mill. In order to investigate the specific surface area, pore volume and microstructure of non-activated and mechanically activated ZnO powders the authors performed N-2 physisorption, SEM and TEM. Crystallite size and lattice microstrain were analyzed by X-ray diffraction method. XRD patterns indicate that peak intensities are getting lower and expend with activation time. The reduction in crystallite size and increasing of lattice microstrain with prolonged milling time were determined applying the Rietveld's method. The difference between non-activated and the activated powder has been also observed by X-ray photoelectron spectroscopy (XPS). XPS is used for investigating the chemical bonding of ZnO powder by analyzing the energy of photoelectrons. The lattice vibration spectra were obtained using Raman spectroscopy. In Raman spectra some changes along with atypical resonant scattering were noticed, which were caused by mechanical activation.
PB  - Elsevier
T2  - Journal of Alloys and Compounds
T1  - Structural investigation of mechanically activated ZnO powder
VL  - 648
SP  - 971
EP  - 979
DO  - 10.1016/j.jallcom.2015.06.247
ER  - 

@article{
author = "Peleš, Adriana and Pavlović, Vera P. and Filipović, Suzana and Obradovic, Nina and Mančić, Lidija and Krstić, Jugoslav and Mitrić, Miodrag and Vlahović, Branislav and Rašić, Goran and Kosanović, Darko and Pavlović, Vladimir B.",
year = "2015",
abstract = "Commercially available ZnO powder was mechanically activated in a planetary ball mill. In order to investigate the specific surface area, pore volume and microstructure of non-activated and mechanically activated ZnO powders the authors performed N-2 physisorption, SEM and TEM. Crystallite size and lattice microstrain were analyzed by X-ray diffraction method. XRD patterns indicate that peak intensities are getting lower and expend with activation time. The reduction in crystallite size and increasing of lattice microstrain with prolonged milling time were determined applying the Rietveld's method. The difference between non-activated and the activated powder has been also observed by X-ray photoelectron spectroscopy (XPS). XPS is used for investigating the chemical bonding of ZnO powder by analyzing the energy of photoelectrons. The lattice vibration spectra were obtained using Raman spectroscopy. In Raman spectra some changes along with atypical resonant scattering were noticed, which were caused by mechanical activation.",
publisher = "Elsevier",
journal = "Journal of Alloys and Compounds",
title = "Structural investigation of mechanically activated ZnO powder",
volume = "648",
pages = "971-979",
doi = "10.1016/j.jallcom.2015.06.247"
}

Peleš, A., Pavlović, V. P., Filipović, S., Obradovic, N., Mančić, L., Krstić, J., Mitrić, M., Vlahović, B., Rašić, G., Kosanović, D.,& Pavlović, V. B.. (2015). Structural investigation of mechanically activated ZnO powder. in Journal of Alloys and Compounds
Elsevier., 648, 971-979.
https://doi.org/10.1016/j.jallcom.2015.06.247

Peleš A, Pavlović VP, Filipović S, Obradovic N, Mančić L, Krstić J, Mitrić M, Vlahović B, Rašić G, Kosanović D, Pavlović VB. Structural investigation of mechanically activated ZnO powder. in Journal of Alloys and Compounds. 2015;648:971-979.
doi:10.1016/j.jallcom.2015.06.247 .

Peleš, Adriana, Pavlović, Vera P., Filipović, Suzana, Obradovic, Nina, Mančić, Lidija, Krstić, Jugoslav, Mitrić, Miodrag, Vlahović, Branislav, Rašić, Goran, Kosanović, Darko, Pavlović, Vladimir B., "Structural investigation of mechanically activated ZnO powder" in Journal of Alloys and Compounds, 648 (2015):971-979,
https://doi.org/10.1016/j.jallcom.2015.06.247 . .

TY  - JOUR
AU  - Peleš, Adriana
AU  - Pavlović, Vera P.
AU  - Filipović, Suzana
AU  - Obradovic, Nina
AU  - Mančić, Lidija
AU  - Krstić, Jugoslav
AU  - Mitrić, Miodrag
AU  - Vlahović, Branislav
AU  - Rašić, Goran
AU  - Kosanović, Darko
AU  - Pavlović, Vladimir B.
PY  - 2015
UR  - https://cer.ihtm.bg.ac.rs/handle/123456789/1715
AB  - Commercially available ZnO powder was mechanically activated in a planetary ball mill. In order to investigate the specific surface area, pore volume and microstructure of non-activated and mechanically activated ZnO powders the authors performed N-2 physisorption, SEM and TEM. Crystallite size and lattice microstrain were analyzed by X-ray diffraction method. XRD patterns indicate that peak intensities are getting lower and expend with activation time. The reduction in crystallite size and increasing of lattice microstrain with prolonged milling time were determined applying the Rietveld's method. The difference between non-activated and the activated powder has been also observed by X-ray photoelectron spectroscopy (XPS). XPS is used for investigating the chemical bonding of ZnO powder by analyzing the energy of photoelectrons. The lattice vibration spectra were obtained using Raman spectroscopy. In Raman spectra some changes along with atypical resonant scattering were noticed, which were caused by mechanical activation.
PB  - Elsevier
T2  - Journal of Alloys and Compounds
T1  - Structural investigation of mechanically activated ZnO powder
VL  - 648
SP  - 971
EP  - 979
DO  - 10.1016/j.jallcom.2015.06.247
ER  - 

@article{
author = "Peleš, Adriana and Pavlović, Vera P. and Filipović, Suzana and Obradovic, Nina and Mančić, Lidija and Krstić, Jugoslav and Mitrić, Miodrag and Vlahović, Branislav and Rašić, Goran and Kosanović, Darko and Pavlović, Vladimir B.",
year = "2015",
abstract = "Commercially available ZnO powder was mechanically activated in a planetary ball mill. In order to investigate the specific surface area, pore volume and microstructure of non-activated and mechanically activated ZnO powders the authors performed N-2 physisorption, SEM and TEM. Crystallite size and lattice microstrain were analyzed by X-ray diffraction method. XRD patterns indicate that peak intensities are getting lower and expend with activation time. The reduction in crystallite size and increasing of lattice microstrain with prolonged milling time were determined applying the Rietveld's method. The difference between non-activated and the activated powder has been also observed by X-ray photoelectron spectroscopy (XPS). XPS is used for investigating the chemical bonding of ZnO powder by analyzing the energy of photoelectrons. The lattice vibration spectra were obtained using Raman spectroscopy. In Raman spectra some changes along with atypical resonant scattering were noticed, which were caused by mechanical activation.",
publisher = "Elsevier",
journal = "Journal of Alloys and Compounds",
title = "Structural investigation of mechanically activated ZnO powder",
volume = "648",
pages = "971-979",
doi = "10.1016/j.jallcom.2015.06.247"
}

Peleš, A., Pavlović, V. P., Filipović, S., Obradovic, N., Mančić, L., Krstić, J., Mitrić, M., Vlahović, B., Rašić, G., Kosanović, D.,& Pavlović, V. B.. (2015). Structural investigation of mechanically activated ZnO powder. in Journal of Alloys and Compounds
Elsevier., 648, 971-979.
https://doi.org/10.1016/j.jallcom.2015.06.247

Peleš A, Pavlović VP, Filipović S, Obradovic N, Mančić L, Krstić J, Mitrić M, Vlahović B, Rašić G, Kosanović D, Pavlović VB. Structural investigation of mechanically activated ZnO powder. in Journal of Alloys and Compounds. 2015;648:971-979.
doi:10.1016/j.jallcom.2015.06.247 .

Peleš, Adriana, Pavlović, Vera P., Filipović, Suzana, Obradovic, Nina, Mančić, Lidija, Krstić, Jugoslav, Mitrić, Miodrag, Vlahović, Branislav, Rašić, Goran, Kosanović, Darko, Pavlović, Vladimir B., "Structural investigation of mechanically activated ZnO powder" in Journal of Alloys and Compounds, 648 (2015):971-979,
https://doi.org/10.1016/j.jallcom.2015.06.247 . .