TY  - CONF
AU  - Holclajtner-Antunović, Ivanka D.
AU  - Pavlović, M.
AU  - Dojčinović, Biljana
AU  - Tadić, Vanja
AU  - Čutović, M.
AU  - Bajuk-Bogdanović, Danica
AU  - Arsić, Ivana A.
AU  - Runjaić-Antić, D.
PY  - 2010
UR  - https://cer.ihtm.bg.ac.rs/handle/123456789/7503
AB  - Mineralogical and physicochemical analysis of healing mud from spa Vrujci wasperformed by ICP-OES analysis and FTIR and micro-Raman spectroscopy. Thetherapeutic effect of mud was improved by plant extracts implementation.
PB  - Society of Physical Chemists of Serbia
C3  - Physical chemistry 2010 : 10th international conference on fundamental and applied aspects of physical chemistry
T1  - Physicochemical characterization of mineral mud from spa Vrujci
UR  - https://hdl.handle.net/21.15107/rcub_cer_7503
ER  - 

@conference{
author = "Holclajtner-Antunović, Ivanka D. and Pavlović, M. and Dojčinović, Biljana and Tadić, Vanja and Čutović, M. and Bajuk-Bogdanović, Danica and Arsić, Ivana A. and Runjaić-Antić, D.",
year = "2010",
abstract = "Mineralogical and physicochemical analysis of healing mud from spa Vrujci wasperformed by ICP-OES analysis and FTIR and micro-Raman spectroscopy. Thetherapeutic effect of mud was improved by plant extracts implementation.",
publisher = "Society of Physical Chemists of Serbia",
journal = "Physical chemistry 2010 : 10th international conference on fundamental and applied aspects of physical chemistry",
title = "Physicochemical characterization of mineral mud from spa Vrujci",
url = "https://hdl.handle.net/21.15107/rcub_cer_7503"
}

Holclajtner-Antunović, I. D., Pavlović, M., Dojčinović, B., Tadić, V., Čutović, M., Bajuk-Bogdanović, D., Arsić, I. A.,& Runjaić-Antić, D.. (2010). Physicochemical characterization of mineral mud from spa Vrujci. in Physical chemistry 2010 : 10th international conference on fundamental and applied aspects of physical chemistry
Society of Physical Chemists of Serbia..
https://hdl.handle.net/21.15107/rcub_cer_7503

Holclajtner-Antunović ID, Pavlović M, Dojčinović B, Tadić V, Čutović M, Bajuk-Bogdanović D, Arsić IA, Runjaić-Antić D. Physicochemical characterization of mineral mud from spa Vrujci. in Physical chemistry 2010 : 10th international conference on fundamental and applied aspects of physical chemistry. 2010;.
https://hdl.handle.net/21.15107/rcub_cer_7503 .

Holclajtner-Antunović, Ivanka D., Pavlović, M., Dojčinović, Biljana, Tadić, Vanja, Čutović, M., Bajuk-Bogdanović, Danica, Arsić, Ivana A., Runjaić-Antić, D., "Physicochemical characterization of mineral mud from spa Vrujci" in Physical chemistry 2010 : 10th international conference on fundamental and applied aspects of physical chemistry (2010),
https://hdl.handle.net/21.15107/rcub_cer_7503 .

TY  - JOUR
AU  - Pavlović, M. G.
AU  - Tomić, M. V.
AU  - Pavlović, Ljubica
AU  - Maksimović, Vesna M.
AU  - Nikolić, Nebojša D.
PY  - 2009
UR  - https://jepm.tfzv.ues.rs.ba/index.php/Journal/article/view/115
UR  - https://cer.ihtm.bg.ac.rs/handle/123456789/3933
AB  - Ispitivan je uticaj različitih reţima elektrolize (konstantna i reversna struja) na morfologiju bakarnog praha. Morfologija istaloţenog bakarnog praha je proučavana pomoću skening elektronskog mikroskopa (SEM). Diskutovan je efekat katodne i anodne amplitudne gustine struje, odnos katodnog i anodnog vremena kao i vremena katodnog taloţenja i anodnog rastvaranja. Pokazano je da parametri koji određuju oblik talasa reversne struje određuju i mikromorfologiju čestica istaloţenog bakarnog praha.
AB  - The effect different deposition regimes (constant and reversing currents), on the powdered copper electrodeposits morphology were investigated. The morphology of electrodeposited copper powder was investigated using a scanning electron microscope (SEM). The effect of the current amplitude, cathodic to anodic time ratio and period of the current wave are discussed. It is shown that the parameters determining the reversing current wave determine the micro-morphology of the copper powder particles deposited.
PB  - Bosnia and Herzegovina : University of East Sarajevo, Faculty of Technology
T2  - Journal of Engineering & Processing Management
T1  - Elektrohemijsko dobijanje i morfologija čestica bakarnog praha dobijenog pri različitim retimima elektrolize
T1  - Electrodeposition and morphology of copper powder particles obtained at different current regimes
VL  - 1
IS  - 1
SP  - 47
EP  - 54
UR  - https://hdl.handle.net/21.15107/rcub_cer_3933
ER  - 

@article{
author = "Pavlović, M. G. and Tomić, M. V. and Pavlović, Ljubica and Maksimović, Vesna M. and Nikolić, Nebojša D.",
year = "2009",
abstract = "Ispitivan je uticaj različitih reţima elektrolize (konstantna i reversna struja) na morfologiju bakarnog praha. Morfologija istaloţenog bakarnog praha je proučavana pomoću skening elektronskog mikroskopa (SEM). Diskutovan je efekat katodne i anodne amplitudne gustine struje, odnos katodnog i anodnog vremena kao i vremena katodnog taloţenja i anodnog rastvaranja. Pokazano je da parametri koji određuju oblik talasa reversne struje određuju i mikromorfologiju čestica istaloţenog bakarnog praha., The effect different deposition regimes (constant and reversing currents), on the powdered copper electrodeposits morphology were investigated. The morphology of electrodeposited copper powder was investigated using a scanning electron microscope (SEM). The effect of the current amplitude, cathodic to anodic time ratio and period of the current wave are discussed. It is shown that the parameters determining the reversing current wave determine the micro-morphology of the copper powder particles deposited.",
publisher = "Bosnia and Herzegovina : University of East Sarajevo, Faculty of Technology",
journal = "Journal of Engineering & Processing Management",
title = "Elektrohemijsko dobijanje i morfologija čestica bakarnog praha dobijenog pri različitim retimima elektrolize, Electrodeposition and morphology of copper powder particles obtained at different current regimes",
volume = "1",
number = "1",
pages = "47-54",
url = "https://hdl.handle.net/21.15107/rcub_cer_3933"
}

Pavlović, M. G., Tomić, M. V., Pavlović, L., Maksimović, V. M.,& Nikolić, N. D.. (2009). Elektrohemijsko dobijanje i morfologija čestica bakarnog praha dobijenog pri različitim retimima elektrolize. in Journal of Engineering & Processing Management
Bosnia and Herzegovina : University of East Sarajevo, Faculty of Technology., 1(1), 47-54.
https://hdl.handle.net/21.15107/rcub_cer_3933

Pavlović MG, Tomić MV, Pavlović L, Maksimović VM, Nikolić ND. Elektrohemijsko dobijanje i morfologija čestica bakarnog praha dobijenog pri različitim retimima elektrolize. in Journal of Engineering & Processing Management. 2009;1(1):47-54.
https://hdl.handle.net/21.15107/rcub_cer_3933 .

Pavlović, M. G., Tomić, M. V., Pavlović, Ljubica, Maksimović, Vesna M., Nikolić, Nebojša D., "Elektrohemijsko dobijanje i morfologija čestica bakarnog praha dobijenog pri različitim retimima elektrolize" in Journal of Engineering & Processing Management, 1, no. 1 (2009):47-54,
https://hdl.handle.net/21.15107/rcub_cer_3933 .

TY  - JOUR
AU  - Tomić, M.V.
AU  - Pavlović, M.G.
AU  - Pavlović, Ljubica J.
AU  - Nikolić, Nebojša D.
PY  - 2009
UR  - https://jepm.tfzv.ues.rs.ba/index.php/Journal/article/view/132
UR  - https://cer.ihtm.bg.ac.rs/handle/123456789/3926
AB  - Uzorci bakra su podvrgnuti mehaničkom i elektrohemijskom glačanju u odgovarajućim elektrolitima za elektrohemijsko glačanje. Na tako prethodno pripremljene površine supstrata izvršeno je taloţenje prevlaka bakra iz dva kupatila i to iz osnovnog elektrolita (OR) sastava: 240 g/dm3 CuSO4 ∙ 5 H2O + 60 g/dm3 H2SO4 i kupatila sa dodacima za sjaj (OR +DS). Pomoću STM i AFM tehnika precizno su prikazane strukturne osobine koje odreĎuju da li je metalna površina ogledalski sjajna ili ne, odnosno da li dobijena topografija površine manje ili više hrapava. UtvrĎeno je znatno povećanje hrapavosti uzoraka na koje je taloţena prevlaka bakra iz osnovnog sulfatnog kupatila (OR) u odnosu na mehanički i mehanički i elektrohemijske pripremane uzorke. TakoĎe, pri taloţenju prevlaka iz kupatila sa dodacima za sjaj (OR +DS), došlo je do smanjenja hrapavosti površine.
AB  - The samples of rolled copper were mechanically and electrochemically polished in suitable electrolytes for electrochemical polishing. These substrate surfaces that had been prepared in advance, served as the basis for depositing of copper layers from two baths, namely, from the basic electrolyte(OR) with the following composition: 240 g/dm3 CuSO4 ∙ 5 H2O + 60 g/dm3 H2SO4i as well as from the bath which contained brightening addition agents(OR +DS). STM and AFM techniques show in great detail the structural properties which determine whether the metal surfaceis are as bright as a mirrior or not, that is, whether the obtained topography of the surface is more or less rough. It was determined that a considerable increase of roughness occurred in the samples where copper layers were deposited from the basic sulfate bath (OR) when compared with mechanical, and mechanical-electrochemical samples. In addition, depositing of the samples from the bath with brightening addition agents (OR +DS) resulted in the decrease of surface roughness.
PB  - Bosnia and Herzegovina : University of East Sarajevo, Faculty of Technology
T2  - Journal of Engineering & Processing Management
T1  - Strukturne karakteristike galvanskih prevlaka bakra
T1  - Structural characteristics of electrodeposited copper coatings
VL  - 1
IS  - 2
SP  - 14
EP  - 25
UR  - https://hdl.handle.net/21.15107/rcub_cer_3926
ER  - 

@article{
author = "Tomić, M.V. and Pavlović, M.G. and Pavlović, Ljubica J. and Nikolić, Nebojša D.",
year = "2009",
abstract = "Uzorci bakra su podvrgnuti mehaničkom i elektrohemijskom glačanju u odgovarajućim elektrolitima za elektrohemijsko glačanje. Na tako prethodno pripremljene površine supstrata izvršeno je taloţenje prevlaka bakra iz dva kupatila i to iz osnovnog elektrolita (OR) sastava: 240 g/dm3 CuSO4 ∙ 5 H2O + 60 g/dm3 H2SO4 i kupatila sa dodacima za sjaj (OR +DS). Pomoću STM i AFM tehnika precizno su prikazane strukturne osobine koje odreĎuju da li je metalna površina ogledalski sjajna ili ne, odnosno da li dobijena topografija površine manje ili više hrapava. UtvrĎeno je znatno povećanje hrapavosti uzoraka na koje je taloţena prevlaka bakra iz osnovnog sulfatnog kupatila (OR) u odnosu na mehanički i mehanički i elektrohemijske pripremane uzorke. TakoĎe, pri taloţenju prevlaka iz kupatila sa dodacima za sjaj (OR +DS), došlo je do smanjenja hrapavosti površine., The samples of rolled copper were mechanically and electrochemically polished in suitable electrolytes for electrochemical polishing. These substrate surfaces that had been prepared in advance, served as the basis for depositing of copper layers from two baths, namely, from the basic electrolyte(OR) with the following composition: 240 g/dm3 CuSO4 ∙ 5 H2O + 60 g/dm3 H2SO4i as well as from the bath which contained brightening addition agents(OR +DS). STM and AFM techniques show in great detail the structural properties which determine whether the metal surfaceis are as bright as a mirrior or not, that is, whether the obtained topography of the surface is more or less rough. It was determined that a considerable increase of roughness occurred in the samples where copper layers were deposited from the basic sulfate bath (OR) when compared with mechanical, and mechanical-electrochemical samples. In addition, depositing of the samples from the bath with brightening addition agents (OR +DS) resulted in the decrease of surface roughness.",
publisher = "Bosnia and Herzegovina : University of East Sarajevo, Faculty of Technology",
journal = "Journal of Engineering & Processing Management",
title = "Strukturne karakteristike galvanskih prevlaka bakra, Structural characteristics of electrodeposited copper coatings",
volume = "1",
number = "2",
pages = "14-25",
url = "https://hdl.handle.net/21.15107/rcub_cer_3926"
}

Tomić, M.V., Pavlović, M.G., Pavlović, L. J.,& Nikolić, N. D.. (2009). Strukturne karakteristike galvanskih prevlaka bakra. in Journal of Engineering & Processing Management
Bosnia and Herzegovina : University of East Sarajevo, Faculty of Technology., 1(2), 14-25.
https://hdl.handle.net/21.15107/rcub_cer_3926

Tomić M, Pavlović M, Pavlović LJ, Nikolić ND. Strukturne karakteristike galvanskih prevlaka bakra. in Journal of Engineering & Processing Management. 2009;1(2):14-25.
https://hdl.handle.net/21.15107/rcub_cer_3926 .

Tomić, M.V., Pavlović, M.G., Pavlović, Ljubica J., Nikolić, Nebojša D., "Strukturne karakteristike galvanskih prevlaka bakra" in Journal of Engineering & Processing Management, 1, no. 2 (2009):14-25,
https://hdl.handle.net/21.15107/rcub_cer_3926 .