TY  - CONF
AU  - Marković, Aleksandra
AU  - Ballot, Andreas
AU  - Avdalović, Jelena
AU  - Dojčinović, Biljana
AU  - Milovanović, Željka
AU  - Petrović, Vladimir
AU  - Schneider, Susanne
PY  - 2024
UR  - https://cer.ihtm.bg.ac.rs/handle/123456789/7794
AB  - Charophyte algae have long been used for the ecological status assessment of lakes. Traditional fieldwork and species determination are, however, time-consuming and expensive. In the BIOLAWEB project, we aim to use environmental DNA (eDNA) for metabarcoding of Chara sp. in the water samples from selected lakes, and use this information to develop new or improve existing indices for the ecological status assessment of lakes.
Ecological status assessment of lakes is important to safeguard biodiversity, and to ensure that lakes are in good enough status to safely be used for, among others, drinking water production, and recreation. Charophytes are benthic algae which are sensitive to changes in water quality and therefore are important indicators for ecological status. The use of eDNA is an approach that can be used to quickly detect the presence of different species in a lake, including species that are easily overlooked with more traditional, time-consuming methods. The use of eDNA for ecological status assessment is, therefore, a new and promising field of study.
Here we present preliminary results of charophyte investigations in four lakes in Serbia, two freshwater and two saline lakes, in three seasons. Besides traditional sampling of charophytes, water samples were filtered for eDNA, aiming to generate new knowledge on the use of DNA metabarcoding for the detection of charophyte algae and for improving indices for ecological status assessment.
PB  - International Society for Applied Phycology
C3  - 8th Congress of the International Society for Applied Phycology (ISAP 2024), Book of Abstracts, June 16-21, 2024, Porto, Portugal
T1  - The use of charophyte algae in ecological status assessment of lakes – developing new methods based on eDNA
SP  - 149
EP  - 150
DO  - 10.5281/zenodo.13309549
UR  - https://hdl.handle.net/21.15107/rcub_cer_7794
ER  - 

@conference{
author = "Marković, Aleksandra and Ballot, Andreas and Avdalović, Jelena and Dojčinović, Biljana and Milovanović, Željka and Petrović, Vladimir and Schneider, Susanne",
year = "2024",
abstract = "Charophyte algae have long been used for the ecological status assessment of lakes. Traditional fieldwork and species determination are, however, time-consuming and expensive. In the BIOLAWEB project, we aim to use environmental DNA (eDNA) for metabarcoding of Chara sp. in the water samples from selected lakes, and use this information to develop new or improve existing indices for the ecological status assessment of lakes.
Ecological status assessment of lakes is important to safeguard biodiversity, and to ensure that lakes are in good enough status to safely be used for, among others, drinking water production, and recreation. Charophytes are benthic algae which are sensitive to changes in water quality and therefore are important indicators for ecological status. The use of eDNA is an approach that can be used to quickly detect the presence of different species in a lake, including species that are easily overlooked with more traditional, time-consuming methods. The use of eDNA for ecological status assessment is, therefore, a new and promising field of study.
Here we present preliminary results of charophyte investigations in four lakes in Serbia, two freshwater and two saline lakes, in three seasons. Besides traditional sampling of charophytes, water samples were filtered for eDNA, aiming to generate new knowledge on the use of DNA metabarcoding for the detection of charophyte algae and for improving indices for ecological status assessment.",
publisher = "International Society for Applied Phycology",
journal = "8th Congress of the International Society for Applied Phycology (ISAP 2024), Book of Abstracts, June 16-21, 2024, Porto, Portugal",
title = "The use of charophyte algae in ecological status assessment of lakes – developing new methods based on eDNA",
pages = "149-150",
doi = "10.5281/zenodo.13309549",
url = "https://hdl.handle.net/21.15107/rcub_cer_7794"
}

Marković, A., Ballot, A., Avdalović, J., Dojčinović, B., Milovanović, Ž., Petrović, V.,& Schneider, S.. (2024). The use of charophyte algae in ecological status assessment of lakes – developing new methods based on eDNA. in 8th Congress of the International Society for Applied Phycology (ISAP 2024), Book of Abstracts, June 16-21, 2024, Porto, Portugal
International Society for Applied Phycology., 149-150.
https://doi.org/10.5281/zenodo.13309549
https://hdl.handle.net/21.15107/rcub_cer_7794

Marković A, Ballot A, Avdalović J, Dojčinović B, Milovanović Ž, Petrović V, Schneider S. The use of charophyte algae in ecological status assessment of lakes – developing new methods based on eDNA. in 8th Congress of the International Society for Applied Phycology (ISAP 2024), Book of Abstracts, June 16-21, 2024, Porto, Portugal. 2024;:149-150.
doi:10.5281/zenodo.13309549
https://hdl.handle.net/21.15107/rcub_cer_7794 .

Marković, Aleksandra, Ballot, Andreas, Avdalović, Jelena, Dojčinović, Biljana, Milovanović, Željka, Petrović, Vladimir, Schneider, Susanne, "The use of charophyte algae in ecological status assessment of lakes – developing new methods based on eDNA" in 8th Congress of the International Society for Applied Phycology (ISAP 2024), Book of Abstracts, June 16-21, 2024, Porto, Portugal (2024):149-150,
https://doi.org/10.5281/zenodo.13309549 .,
https://hdl.handle.net/21.15107/rcub_cer_7794 .

TY  - CONF
AU  - Ćirić, Miloš
AU  - Lemonnier, Clarisse
AU  - Alric, Benjamin
AU  - Miletić, Srđan
AU  - Avdalović, Jelena
AU  - Dojčinović, Biljana
AU  - Milovanović, Željka
AU  - Petrović, Vladimir
AU  - Ballot, Andreas
AU  - Rimet, Frederic
PY  - 2024
UR  - https://cer.ihtm.bg.ac.rs/handle/123456789/7795
AB  - Freshwater lakes have been heavily altered by multiple stressors for decades, including a wide range of harmful
human activities. Similarly, it is estimated that most of continental saline lakes will have undergone changes in their
functioning by 2025. In the European Water Framework Directive (WFD), the ecological status assessment of lakes
is based on the survey of key communities (i.e., Biological Quality Elements, BQEs). Due to its ecological features,
phytoplankton is one of the key BQEs required by the WFD. In current assessments, phytoplankton is studied
using a standardised microscopy approach. The advent of methods based on molecular techniques (e.g., eDNA
metabarcoding) provides an alternative to overcome issues associated with microscopy-based assessment. The
aim of our study was to compare phytoplankton data obtained by microscopy approach with eDNA metabarcoding
based on the 23S RNA marker gene. Water was sampled in eight sites: four sites in Savsko lake (urban freshwater
lake) and four sites in Plava Banja (saline clay pit pond) during spring, summer, and autumn 2023. The water
quality analyses showed that nutrient concentrations (especially total nitrogen), chlorophyl a and conductivity were
several times lower in the freshwater lake than in the saline lake. The very high total dissolved mineral content in
Plava Banja had a substantial impact on the phytoplankton composition The results of lake species inventories
obtained using both approaches will be presented. Particular attention will be paid to the level of congruence
between the fl oristic lists.
PB  - International Society of Limnology
C3  - 37th Congress of the International Society of Limnology – SIL2024, Abstracts book, May 5-9, 2024, Foz do Iguaçu, Brazil
T1  - Application of eDNA metabarcoding to phytoplankton research in freshwater and saline lakes
SP  - 266
EP  - 266
DO  - 10.5281/zenodo.13324750
ER  - 

@conference{
author = "Ćirić, Miloš and Lemonnier, Clarisse and Alric, Benjamin and Miletić, Srđan and Avdalović, Jelena and Dojčinović, Biljana and Milovanović, Željka and Petrović, Vladimir and Ballot, Andreas and Rimet, Frederic",
year = "2024",
abstract = "Freshwater lakes have been heavily altered by multiple stressors for decades, including a wide range of harmful
human activities. Similarly, it is estimated that most of continental saline lakes will have undergone changes in their
functioning by 2025. In the European Water Framework Directive (WFD), the ecological status assessment of lakes
is based on the survey of key communities (i.e., Biological Quality Elements, BQEs). Due to its ecological features,
phytoplankton is one of the key BQEs required by the WFD. In current assessments, phytoplankton is studied
using a standardised microscopy approach. The advent of methods based on molecular techniques (e.g., eDNA
metabarcoding) provides an alternative to overcome issues associated with microscopy-based assessment. The
aim of our study was to compare phytoplankton data obtained by microscopy approach with eDNA metabarcoding
based on the 23S RNA marker gene. Water was sampled in eight sites: four sites in Savsko lake (urban freshwater
lake) and four sites in Plava Banja (saline clay pit pond) during spring, summer, and autumn 2023. The water
quality analyses showed that nutrient concentrations (especially total nitrogen), chlorophyl a and conductivity were
several times lower in the freshwater lake than in the saline lake. The very high total dissolved mineral content in
Plava Banja had a substantial impact on the phytoplankton composition The results of lake species inventories
obtained using both approaches will be presented. Particular attention will be paid to the level of congruence
between the fl oristic lists.",
publisher = "International Society of Limnology",
journal = "37th Congress of the International Society of Limnology – SIL2024, Abstracts book, May 5-9, 2024, Foz do Iguaçu, Brazil",
title = "Application of eDNA metabarcoding to phytoplankton research in freshwater and saline lakes",
pages = "266-266",
doi = "10.5281/zenodo.13324750"
}

Ćirić, M., Lemonnier, C., Alric, B., Miletić, S., Avdalović, J., Dojčinović, B., Milovanović, Ž., Petrović, V., Ballot, A.,& Rimet, F.. (2024). Application of eDNA metabarcoding to phytoplankton research in freshwater and saline lakes. in 37th Congress of the International Society of Limnology – SIL2024, Abstracts book, May 5-9, 2024, Foz do Iguaçu, Brazil
International Society of Limnology., 266-266.
https://doi.org/10.5281/zenodo.13324750

Ćirić M, Lemonnier C, Alric B, Miletić S, Avdalović J, Dojčinović B, Milovanović Ž, Petrović V, Ballot A, Rimet F. Application of eDNA metabarcoding to phytoplankton research in freshwater and saline lakes. in 37th Congress of the International Society of Limnology – SIL2024, Abstracts book, May 5-9, 2024, Foz do Iguaçu, Brazil. 2024;:266-266.
doi:10.5281/zenodo.13324750 .

Ćirić, Miloš, Lemonnier, Clarisse, Alric, Benjamin, Miletić, Srđan, Avdalović, Jelena, Dojčinović, Biljana, Milovanović, Željka, Petrović, Vladimir, Ballot, Andreas, Rimet, Frederic, "Application of eDNA metabarcoding to phytoplankton research in freshwater and saline lakes" in 37th Congress of the International Society of Limnology – SIL2024, Abstracts book, May 5-9, 2024, Foz do Iguaçu, Brazil (2024):266-266,
https://doi.org/10.5281/zenodo.13324750 . .

TY  - JOUR
AU  - Petrović, Vladimir
AU  - Jovanović, Dušan
AU  - Borisov, Mirko
AU  - Bugarinović, Željko
AU  - Gavrilović, Milan
AU  - Ilić, Zoran
AU  - Lukić, Darko
PY  - 2024
UR  - https://cer.ihtm.bg.ac.rs/handle/123456789/7756
AB  - In this paper, a model has been created for the automated generation of DTM (Digital Terrain Models) using a hybrid data structure based on LiDAR (Light Detection and Ranging) data. The automated process facilitates the creation and implementation of both simplified and complex DTMs using hybrid data structure. The classification of terrain into various classes is achieved through the application of the slope parameter. This model can be applied to the entire area or a specific area of interest by loading the boundaries and offers the optional capability to implement structural terrain lines in the form of watersheds. The proposed model addresses the challenge of generating DTMs in rapidly changing terrain and areas with complex landscapes, providing solutions to enhance DTM generation performance. Alongside the hybrid DTM structure, the developed model introduces a hierarchical grid with three different spatial resolutions, allowing users to adjust them based on specific requirements. The model is designed to adapt to the terrain, creating a hybrid data structure that combines the benefits of the GRID and TIN (Triangulated Irregular Network) approaches. The development and implementation of the model were carried out in ModelBuilder, within the ArcMap software environment.
PB  - Osijek, Croatia : Sveučilište Josipa Jurja Strossmayera u Osijeku, Fakultet elektrotehnike, računarstva i informacijskih tehnologija
PB  - Slavonski Brod, Croatia : Sveučilište u Slavonskom Brodu, Stojarski fakultet
PB  - Osijek, Croatia : Sveučilište Josipa Jurja Strossmayera u Osijeku, Građevinski i arhitektonski fakultet
T2  - Tehnicki Vjesnik = Technical Gazette
T1  - Model for Automated Generation of DTM with Hybrid Data Structure Using Point Clouds
VL  - 31
IS  - 4
SP  - 1411
EP  - 1421
DO  - 10.17559/TV-20230710000795
ER  - 

@article{
author = "Petrović, Vladimir and Jovanović, Dušan and Borisov, Mirko and Bugarinović, Željko and Gavrilović, Milan and Ilić, Zoran and Lukić, Darko",
year = "2024",
abstract = "In this paper, a model has been created for the automated generation of DTM (Digital Terrain Models) using a hybrid data structure based on LiDAR (Light Detection and Ranging) data. The automated process facilitates the creation and implementation of both simplified and complex DTMs using hybrid data structure. The classification of terrain into various classes is achieved through the application of the slope parameter. This model can be applied to the entire area or a specific area of interest by loading the boundaries and offers the optional capability to implement structural terrain lines in the form of watersheds. The proposed model addresses the challenge of generating DTMs in rapidly changing terrain and areas with complex landscapes, providing solutions to enhance DTM generation performance. Alongside the hybrid DTM structure, the developed model introduces a hierarchical grid with three different spatial resolutions, allowing users to adjust them based on specific requirements. The model is designed to adapt to the terrain, creating a hybrid data structure that combines the benefits of the GRID and TIN (Triangulated Irregular Network) approaches. The development and implementation of the model were carried out in ModelBuilder, within the ArcMap software environment.",
publisher = "Osijek, Croatia : Sveučilište Josipa Jurja Strossmayera u Osijeku, Fakultet elektrotehnike, računarstva i informacijskih tehnologija, Slavonski Brod, Croatia : Sveučilište u Slavonskom Brodu, Stojarski fakultet, Osijek, Croatia : Sveučilište Josipa Jurja Strossmayera u Osijeku, Građevinski i arhitektonski fakultet",
journal = "Tehnicki Vjesnik = Technical Gazette",
title = "Model for Automated Generation of DTM with Hybrid Data Structure Using Point Clouds",
volume = "31",
number = "4",
pages = "1411-1421",
doi = "10.17559/TV-20230710000795"
}

Petrović, V., Jovanović, D., Borisov, M., Bugarinović, Ž., Gavrilović, M., Ilić, Z.,& Lukić, D.. (2024). Model for Automated Generation of DTM with Hybrid Data Structure Using Point Clouds. in Tehnicki Vjesnik = Technical Gazette
Osijek, Croatia : Sveučilište Josipa Jurja Strossmayera u Osijeku, Fakultet elektrotehnike, računarstva i informacijskih tehnologija., 31(4), 1411-1421.
https://doi.org/10.17559/TV-20230710000795

Petrović V, Jovanović D, Borisov M, Bugarinović Ž, Gavrilović M, Ilić Z, Lukić D. Model for Automated Generation of DTM with Hybrid Data Structure Using Point Clouds. in Tehnicki Vjesnik = Technical Gazette. 2024;31(4):1411-1421.
doi:10.17559/TV-20230710000795 .

Petrović, Vladimir, Jovanović, Dušan, Borisov, Mirko, Bugarinović, Željko, Gavrilović, Milan, Ilić, Zoran, Lukić, Darko, "Model for Automated Generation of DTM with Hybrid Data Structure Using Point Clouds" in Tehnicki Vjesnik = Technical Gazette, 31, no. 4 (2024):1411-1421,
https://doi.org/10.17559/TV-20230710000795 . .

TY  - CONF
AU  - Vidaković, Danijela
AU  - Avdalović, Jelena
AU  - Dojčinović, Biljana
AU  - Marković, Aleksandra
AU  - Miletić, Srđan
AU  - Milanović, Katarina
AU  - Milovanović, Željka
AU  - Petrović, Vladimir
AU  - Zlatović, Dragana
AU  - Alric, Benjamin
AU  - Dumont, Herve
AU  - Lemonnier, Clarisse
AU  - Moatti, Antoine
AU  - Rimet, Frederic
AU  - Ballot, Andreas
AU  - Claudia Schneider, Susanne
AU  - Ćirić, Miloš
PY  - 2024
UR  - https://www.ache-pub.org.rs/index.php/HemInd/article/view/1324
UR  - https://cer.ihtm.bg.ac.rs/handle/123456789/7594
AB  - Project "Boosting Institute of Chemistry, Technology and Metallurgy in Water Biomonitoring" (BIOLAWEB) aims to strengthen the research and innovation capacity of the Institute of Chemistry, Technology and Metallurgy, National Institute of the Republic of Serbia, University of Belgrade (UB-ICTM) in biodiversity assessment and biomonitoring. UB-ICTM researchers made a noticeable contribution to the study of biodiversity, community ecology, and conservation of water bodies in South-Eastern Europe. However, a knowledge on index development and intercalibration following the EU standards for lakes and watercourse monitoring is still lacking in this geographic region. Similarly, there is a knowledge gap in DNA-based ecological status assessment in SEE.
PB  - Savez hemijskih inženjera Srbije
C3  - Hemijska industrija
T1  - Boosting Institute of Chemistry, Technology and Metallurgy in water biomonitoring - BIOLAWEB
VL  - 78
IS  - 1s
SP  - 77
DO  - 10.5281/zenodo.12750268
UR  - https://hdl.handle.net/21.15107/rcub_cer_7594
ER  - 

@conference{
author = "Vidaković, Danijela and Avdalović, Jelena and Dojčinović, Biljana and Marković, Aleksandra and Miletić, Srđan and Milanović, Katarina and Milovanović, Željka and Petrović, Vladimir and Zlatović, Dragana and Alric, Benjamin and Dumont, Herve and Lemonnier, Clarisse and Moatti, Antoine and Rimet, Frederic and Ballot, Andreas and Claudia Schneider, Susanne and Ćirić, Miloš",
year = "2024",
abstract = "Project "Boosting Institute of Chemistry, Technology and Metallurgy in Water Biomonitoring" (BIOLAWEB) aims to strengthen the research and innovation capacity of the Institute of Chemistry, Technology and Metallurgy, National Institute of the Republic of Serbia, University of Belgrade (UB-ICTM) in biodiversity assessment and biomonitoring. UB-ICTM researchers made a noticeable contribution to the study of biodiversity, community ecology, and conservation of water bodies in South-Eastern Europe. However, a knowledge on index development and intercalibration following the EU standards for lakes and watercourse monitoring is still lacking in this geographic region. Similarly, there is a knowledge gap in DNA-based ecological status assessment in SEE.",
publisher = "Savez hemijskih inženjera Srbije",
journal = "Hemijska industrija",
title = "Boosting Institute of Chemistry, Technology and Metallurgy in water biomonitoring - BIOLAWEB",
volume = "78",
number = "1s",
pages = "77",
doi = "10.5281/zenodo.12750268",
url = "https://hdl.handle.net/21.15107/rcub_cer_7594"
}

Vidaković, D., Avdalović, J., Dojčinović, B., Marković, A., Miletić, S., Milanović, K., Milovanović, Ž., Petrović, V., Zlatović, D., Alric, B., Dumont, H., Lemonnier, C., Moatti, A., Rimet, F., Ballot, A., Claudia Schneider, S.,& Ćirić, M.. (2024). Boosting Institute of Chemistry, Technology and Metallurgy in water biomonitoring - BIOLAWEB. in Hemijska industrija
Savez hemijskih inženjera Srbije., 78(1s), 77.
https://doi.org/10.5281/zenodo.12750268
https://hdl.handle.net/21.15107/rcub_cer_7594

Vidaković D, Avdalović J, Dojčinović B, Marković A, Miletić S, Milanović K, Milovanović Ž, Petrović V, Zlatović D, Alric B, Dumont H, Lemonnier C, Moatti A, Rimet F, Ballot A, Claudia Schneider S, Ćirić M. Boosting Institute of Chemistry, Technology and Metallurgy in water biomonitoring - BIOLAWEB. in Hemijska industrija. 2024;78(1s):77.
doi:10.5281/zenodo.12750268
https://hdl.handle.net/21.15107/rcub_cer_7594 .

Vidaković, Danijela, Avdalović, Jelena, Dojčinović, Biljana, Marković, Aleksandra, Miletić, Srđan, Milanović, Katarina, Milovanović, Željka, Petrović, Vladimir, Zlatović, Dragana, Alric, Benjamin, Dumont, Herve, Lemonnier, Clarisse, Moatti, Antoine, Rimet, Frederic, Ballot, Andreas, Claudia Schneider, Susanne, Ćirić, Miloš, "Boosting Institute of Chemistry, Technology and Metallurgy in water biomonitoring - BIOLAWEB" in Hemijska industrija, 78, no. 1s (2024):77,
https://doi.org/10.5281/zenodo.12750268 .,
https://hdl.handle.net/21.15107/rcub_cer_7594 .

TY  - CONF
AU  - Vidaković, Danijela
AU  - Rimet, Frederic
AU  - Dojčinović, Biljana
AU  - Lemonnier, Clarisse
AU  - Milovanović, Željka
AU  - Petrović, Vladimir
AU  - Ćirić, Miloš
PY  - 2024
UR  - https://cer.ihtm.bg.ac.rs/handle/123456789/7681
AB  - Benthic diatoms have been used for decades as powerful indicators for biomonitoring lakes and rivers around the world. Due to the more than 100,000 diatom species morphological approach requires a high level of taxonomic knowledge. To overcome this obstacle, the application of metabarcoding has been developed in recent years. One of the challenges that still “forces” the simultaneous use of both approaches in biomonitoring is the incompleteness of the reference barcoding library.
The diatom community from different substrates (reed, mud, artificial substrate) in Pečena Slatina has been intensively investigated in 2019, 2021-2023. One of the goals of the ongoing BIOLAWEB project, funded by the European Union, was to complement the Diat.barcode reference library for the possibility of using metabarcoding as tool in the future routine biomonitoring in Serbia. The morphological results show a similar diatom composition among different substrates with little difference in dominant taxa. Nitzschia frustulum was one of the most dominant taxa in 2022, while in 2019 it dominated together with Anomoeoneis sphaerophora, in 2021 with Navicymbula pusilla and Tryblionella hungarica, and in 2023 with Halamphora veneta. Molecular data (rbcL) have shown the dominance of T. hungarica and Nitzschia supralitorea.
Anomoeoneis sphaerophora was observed in microscopy while metabarcoding data showed an unknown sequence of Anomoeoneis. Using phylogeny and p-distance calculations to compare our sequence to those present in the Diat.barcode we showed that this unknown sequence of Anomoeoneis had a high probability of matching with A. sphaerophora.
PB  - International Society for Applied Phycology
C3  - Book of Abstracts - 8th Congress of the International Society of Applied Phycology, ISAP 2024, June 16-21, 2024, Porto, Portugal
T1  - Metabarcoding as a tool to complement the reference database – a case study of saline lake (Pečena Slatina, Serbia)
SP  - 20
EP  - 20
DO  - 10.5281/zenodo.12748748
UR  - https://hdl.handle.net/21.15107/rcub_cer_7681
ER  - 

@conference{
author = "Vidaković, Danijela and Rimet, Frederic and Dojčinović, Biljana and Lemonnier, Clarisse and Milovanović, Željka and Petrović, Vladimir and Ćirić, Miloš",
year = "2024",
abstract = "Benthic diatoms have been used for decades as powerful indicators for biomonitoring lakes and rivers around the world. Due to the more than 100,000 diatom species morphological approach requires a high level of taxonomic knowledge. To overcome this obstacle, the application of metabarcoding has been developed in recent years. One of the challenges that still “forces” the simultaneous use of both approaches in biomonitoring is the incompleteness of the reference barcoding library.
The diatom community from different substrates (reed, mud, artificial substrate) in Pečena Slatina has been intensively investigated in 2019, 2021-2023. One of the goals of the ongoing BIOLAWEB project, funded by the European Union, was to complement the Diat.barcode reference library for the possibility of using metabarcoding as tool in the future routine biomonitoring in Serbia. The morphological results show a similar diatom composition among different substrates with little difference in dominant taxa. Nitzschia frustulum was one of the most dominant taxa in 2022, while in 2019 it dominated together with Anomoeoneis sphaerophora, in 2021 with Navicymbula pusilla and Tryblionella hungarica, and in 2023 with Halamphora veneta. Molecular data (rbcL) have shown the dominance of T. hungarica and Nitzschia supralitorea.
Anomoeoneis sphaerophora was observed in microscopy while metabarcoding data showed an unknown sequence of Anomoeoneis. Using phylogeny and p-distance calculations to compare our sequence to those present in the Diat.barcode we showed that this unknown sequence of Anomoeoneis had a high probability of matching with A. sphaerophora.",
publisher = "International Society for Applied Phycology",
journal = "Book of Abstracts - 8th Congress of the International Society of Applied Phycology, ISAP 2024, June 16-21, 2024, Porto, Portugal",
title = "Metabarcoding as a tool to complement the reference database – a case study of saline lake (Pečena Slatina, Serbia)",
pages = "20-20",
doi = "10.5281/zenodo.12748748",
url = "https://hdl.handle.net/21.15107/rcub_cer_7681"
}

Vidaković, D., Rimet, F., Dojčinović, B., Lemonnier, C., Milovanović, Ž., Petrović, V.,& Ćirić, M.. (2024). Metabarcoding as a tool to complement the reference database – a case study of saline lake (Pečena Slatina, Serbia). in Book of Abstracts - 8th Congress of the International Society of Applied Phycology, ISAP 2024, June 16-21, 2024, Porto, Portugal
International Society for Applied Phycology., 20-20.
https://doi.org/10.5281/zenodo.12748748
https://hdl.handle.net/21.15107/rcub_cer_7681

Vidaković D, Rimet F, Dojčinović B, Lemonnier C, Milovanović Ž, Petrović V, Ćirić M. Metabarcoding as a tool to complement the reference database – a case study of saline lake (Pečena Slatina, Serbia). in Book of Abstracts - 8th Congress of the International Society of Applied Phycology, ISAP 2024, June 16-21, 2024, Porto, Portugal. 2024;:20-20.
doi:10.5281/zenodo.12748748
https://hdl.handle.net/21.15107/rcub_cer_7681 .

Vidaković, Danijela, Rimet, Frederic, Dojčinović, Biljana, Lemonnier, Clarisse, Milovanović, Željka, Petrović, Vladimir, Ćirić, Miloš, "Metabarcoding as a tool to complement the reference database – a case study of saline lake (Pečena Slatina, Serbia)" in Book of Abstracts - 8th Congress of the International Society of Applied Phycology, ISAP 2024, June 16-21, 2024, Porto, Portugal (2024):20-20,
https://doi.org/10.5281/zenodo.12748748 .,
https://hdl.handle.net/21.15107/rcub_cer_7681 .

TY  - CONF
AU  - Ćirić, Miloš
AU  - Lemonnier, Clarisse
AU  - Alric, Benjamin
AU  - Dojčinović, Biljana
AU  - Avdalović, Jelena
AU  - Miletić, Srđan
AU  - Petrović, Vladimir
AU  - Milovanović, Željka
AU  - Vidaković, Danijela
AU  - Marković, Aleksandra
AU  - Rimet, Frederic
AU  - Ballot, Andreas
PY  - 2024
UR  - https://cer.ihtm.bg.ac.rs/handle/123456789/7663
AB  - Napredak u molekularnoj biologiji doveo je do snažnog razvoja molekularnih metoda u biomonitoringu. Metabarkoding je porcedura zasnovana na upotrebi DNK molekula koja može da dopuni ili čak potpuno zameni klasičan biomonitoring u skorijoj budućnosti. Sproveli smo istraživanje fitoplanktonske zajednice, važnog biološkog parametra kvaliteta, u Markovačkom jezeru sa ciljem da uporedimo tradicionalni i molekularni pristup u biomonitoringu. Ukupno smo pronašli 105 sekvenci algi i cijanobakterija, ali usled nepotpunosti baze, lista taksona dobijena metabarkodingom je nepotpuna. Iako se rezultati metabarkodinga trenutno ne mogu koristiti za procenu ekološkog statusa u Republici Srbiji, primena molekularnog pristupa u biomonitoringu je obećavajuća.
AB  - The advancement in molecular biology resultet in development of molecular methods in biomonitoring. Metabarcoding is a DNA based procedure that can supplement or even replace classical biomonitoring in the near future. We conducted a study of phytoplankton, an importtant biological quality element, in Markovačko lake aiming to compare morphological and metabacoding approach in biomonitoring. In total, 105 sequences were obtained, but due to the incompletness of the reference library the metabarcoding taxonomic list was not comprehensive. Although, the metabarcoding results can not be currently used for ecological status assessment in the Republic of Serbia, its application in biomonitoring is promissing.
PB  - Srpsko društvo za zaštitu voda
C3  - Zbornik radova 53. godišnje konferencije o aktuelnim temama korišćenja i zaštite voda - VODA 2024, 27-29. maj, 2024, Palić, Srbija
T1  - Procena ekološkog potencijala Markovačkog jezera - novi pristup u biomonitoringu
T1  - Ecological potential assessment of Markovačko lake - a new approach in biomonitoring
SP  - 273
EP  - 282
DO  - 10.46793/VODA24.273C
ER  - 

@conference{
author = "Ćirić, Miloš and Lemonnier, Clarisse and Alric, Benjamin and Dojčinović, Biljana and Avdalović, Jelena and Miletić, Srđan and Petrović, Vladimir and Milovanović, Željka and Vidaković, Danijela and Marković, Aleksandra and Rimet, Frederic and Ballot, Andreas",
year = "2024",
abstract = "Napredak u molekularnoj biologiji doveo je do snažnog razvoja molekularnih metoda u biomonitoringu. Metabarkoding je porcedura zasnovana na upotrebi DNK molekula koja može da dopuni ili čak potpuno zameni klasičan biomonitoring u skorijoj budućnosti. Sproveli smo istraživanje fitoplanktonske zajednice, važnog biološkog parametra kvaliteta, u Markovačkom jezeru sa ciljem da uporedimo tradicionalni i molekularni pristup u biomonitoringu. Ukupno smo pronašli 105 sekvenci algi i cijanobakterija, ali usled nepotpunosti baze, lista taksona dobijena metabarkodingom je nepotpuna. Iako se rezultati metabarkodinga trenutno ne mogu koristiti za procenu ekološkog statusa u Republici Srbiji, primena molekularnog pristupa u biomonitoringu je obećavajuća., The advancement in molecular biology resultet in development of molecular methods in biomonitoring. Metabarcoding is a DNA based procedure that can supplement or even replace classical biomonitoring in the near future. We conducted a study of phytoplankton, an importtant biological quality element, in Markovačko lake aiming to compare morphological and metabacoding approach in biomonitoring. In total, 105 sequences were obtained, but due to the incompletness of the reference library the metabarcoding taxonomic list was not comprehensive. Although, the metabarcoding results can not be currently used for ecological status assessment in the Republic of Serbia, its application in biomonitoring is promissing.",
publisher = "Srpsko društvo za zaštitu voda",
journal = "Zbornik radova 53. godišnje konferencije o aktuelnim temama korišćenja i zaštite voda - VODA 2024, 27-29. maj, 2024, Palić, Srbija",
title = "Procena ekološkog potencijala Markovačkog jezera - novi pristup u biomonitoringu, Ecological potential assessment of Markovačko lake - a new approach in biomonitoring",
pages = "273-282",
doi = "10.46793/VODA24.273C"
}

Ćirić, M., Lemonnier, C., Alric, B., Dojčinović, B., Avdalović, J., Miletić, S., Petrović, V., Milovanović, Ž., Vidaković, D., Marković, A., Rimet, F.,& Ballot, A.. (2024). Procena ekološkog potencijala Markovačkog jezera - novi pristup u biomonitoringu. in Zbornik radova 53. godišnje konferencije o aktuelnim temama korišćenja i zaštite voda - VODA 2024, 27-29. maj, 2024, Palić, Srbija
Srpsko društvo za zaštitu voda., 273-282.
https://doi.org/10.46793/VODA24.273C

Ćirić M, Lemonnier C, Alric B, Dojčinović B, Avdalović J, Miletić S, Petrović V, Milovanović Ž, Vidaković D, Marković A, Rimet F, Ballot A. Procena ekološkog potencijala Markovačkog jezera - novi pristup u biomonitoringu. in Zbornik radova 53. godišnje konferencije o aktuelnim temama korišćenja i zaštite voda - VODA 2024, 27-29. maj, 2024, Palić, Srbija. 2024;:273-282.
doi:10.46793/VODA24.273C .

Ćirić, Miloš, Lemonnier, Clarisse, Alric, Benjamin, Dojčinović, Biljana, Avdalović, Jelena, Miletić, Srđan, Petrović, Vladimir, Milovanović, Željka, Vidaković, Danijela, Marković, Aleksandra, Rimet, Frederic, Ballot, Andreas, "Procena ekološkog potencijala Markovačkog jezera - novi pristup u biomonitoringu" in Zbornik radova 53. godišnje konferencije o aktuelnim temama korišćenja i zaštite voda - VODA 2024, 27-29. maj, 2024, Palić, Srbija (2024):273-282,
https://doi.org/10.46793/VODA24.273C . .

TY  - CONF
AU  - Kovačević, Igor
AU  - Đurović, Radovan
AU  - Nikolić, Gojko
AU  - Petrović, Vladimir
AU  - Tucikešić, Sanja
PY  - 2024
UR  - https://cer.ihtm.bg.ac.rs/handle/123456789/7549
AB  - Today, there are few activities in which information and communication technologies do not
play a direct or indirect role. In fact, they represent the 'nerves and arteries' of modern society,
facilitating and supporting global flows of information, ideas, and services. In this way,
geoinformation systems (GIS), as modern information technologies, directly impact the
processing and utilization of spatial data.
Considering the fact that GIS is continuously expanding and improving, today it can be applied
in various fields that involve information related to space, as well as in the decision-making
processes related to them. It can be utilized by all institutions and companies dealing with space
management and exploitation in any way, including urban planning, construction land, road and
railway networks, water supply, sewage, power distribution, gas distribution,
telecommunications, district heating, ecology, landscaping, agriculture, forestry, and more.
Quantum GIS (QGIS) is the leading open source GIS desktop application which belongs to and
is developed by Open-Source Geospatial Foundation (OSGeo). With many plugins developed
by user community, QGIS offers vast variety of different functions for working with vector and
raster spatial data, and also non-geographical data.
Without delving further into this wide field, in this paper we will describe the Information system of the company "13th july-plantaže", which main activity is wine grapes and wine production, through a specific project of new vineyards data acquisition, analysis and display,
completed in the previous period using the QGIS software package, along with suggestions for
its improvement.
PB  - University of Montenegro Faculty of Civil Engineering
C3  - The ninth international conference "Civil engineering - science & practice", GNP 2024, Proceedings, 5-9 march 2024, Kolašin, Montenegro
T1  - Databases and records of property and new plantings in the company "13.Jul-plantaže" using open-source platform QGIS
SP  - 1053
EP  - 1060
UR  - https://hdl.handle.net/21.15107/rcub_cer_7549
ER  - 

@conference{
author = "Kovačević, Igor and Đurović, Radovan and Nikolić, Gojko and Petrović, Vladimir and Tucikešić, Sanja",
year = "2024",
abstract = "Today, there are few activities in which information and communication technologies do not
play a direct or indirect role. In fact, they represent the 'nerves and arteries' of modern society,
facilitating and supporting global flows of information, ideas, and services. In this way,
geoinformation systems (GIS), as modern information technologies, directly impact the
processing and utilization of spatial data.
Considering the fact that GIS is continuously expanding and improving, today it can be applied
in various fields that involve information related to space, as well as in the decision-making
processes related to them. It can be utilized by all institutions and companies dealing with space
management and exploitation in any way, including urban planning, construction land, road and
railway networks, water supply, sewage, power distribution, gas distribution,
telecommunications, district heating, ecology, landscaping, agriculture, forestry, and more.
Quantum GIS (QGIS) is the leading open source GIS desktop application which belongs to and
is developed by Open-Source Geospatial Foundation (OSGeo). With many plugins developed
by user community, QGIS offers vast variety of different functions for working with vector and
raster spatial data, and also non-geographical data.
Without delving further into this wide field, in this paper we will describe the Information system of the company "13th july-plantaže", which main activity is wine grapes and wine production, through a specific project of new vineyards data acquisition, analysis and display,
completed in the previous period using the QGIS software package, along with suggestions for
its improvement.",
publisher = "University of Montenegro Faculty of Civil Engineering",
journal = "The ninth international conference "Civil engineering - science & practice", GNP 2024, Proceedings, 5-9 march 2024, Kolašin, Montenegro",
title = "Databases and records of property and new plantings in the company "13.Jul-plantaže" using open-source platform QGIS",
pages = "1053-1060",
url = "https://hdl.handle.net/21.15107/rcub_cer_7549"
}

Kovačević, I., Đurović, R., Nikolić, G., Petrović, V.,& Tucikešić, S.. (2024). Databases and records of property and new plantings in the company "13.Jul-plantaže" using open-source platform QGIS. in The ninth international conference "Civil engineering - science & practice", GNP 2024, Proceedings, 5-9 march 2024, Kolašin, Montenegro
University of Montenegro Faculty of Civil Engineering., 1053-1060.
https://hdl.handle.net/21.15107/rcub_cer_7549

Kovačević I, Đurović R, Nikolić G, Petrović V, Tucikešić S. Databases and records of property and new plantings in the company "13.Jul-plantaže" using open-source platform QGIS. in The ninth international conference "Civil engineering - science & practice", GNP 2024, Proceedings, 5-9 march 2024, Kolašin, Montenegro. 2024;:1053-1060.
https://hdl.handle.net/21.15107/rcub_cer_7549 .

Kovačević, Igor, Đurović, Radovan, Nikolić, Gojko, Petrović, Vladimir, Tucikešić, Sanja, "Databases and records of property and new plantings in the company "13.Jul-plantaže" using open-source platform QGIS" in The ninth international conference "Civil engineering - science & practice", GNP 2024, Proceedings, 5-9 march 2024, Kolašin, Montenegro (2024):1053-1060,
https://hdl.handle.net/21.15107/rcub_cer_7549 .

TY  - JOUR
AU  - Borisov, Mirko
AU  - Vrtunski, Milan
AU  - Petrović, Vladimir
AU  - Bojović, Bogdan
AU  - Novak, Tanja
PY  - 2023
UR  - https://cer.ihtm.bg.ac.rs/handle/123456789/7412
AB  - The paper analyzes the approximation of the ellipsoid by the sphere. Earth is a space body with a mathematically irregular shape, so idealized smooth surfaces are used for calculations. The first is the geoid, a smooth, equipotential surface that best approximates mean sea level. However, the geoid does not have an analytical form and is unsuitable for many applications, so an ellipsoid is used for approximation. In applications where high accuracy is not required (e.g., with small scale maps), the ellipsoid is approximated by a sphere. The radius of the sphere can be calculated in three ways: according to the equivalent volume criterion, according to the equivalent surface criterion, or as the mean value of the three semi-axes of the ellipsoid. All three methods of approximation were tested by calculating the length of the geodetic line on the ellipsoid, the orthodrome on the spheres and then the error. Also, the influence of latitude on the error value was tested. For three different values of geographic latitude, the lengths of geodetic lines up to one hundred points were calculated (using the Bessel method for solving the second main geodetic task on the ellipsoid), as well as the lengths of the orthodromes on the spheres, with the radii of the spheres determined in the three mentioned ways. The obtained results were then analyzed and discussed.
PB  - Subotica, Srbija: Građevinski fakultet Univerziteta Novi Sad
T2  - Journal of Faculty of Civil Engineering
T1  - Comparative analysis of the ellipsoid approximation with the sphere
VL  - 39
IS  - 44
SP  - 89
EP  - 105
DO  - 10.14415/JFCE-900
ER  - 

@article{
author = "Borisov, Mirko and Vrtunski, Milan and Petrović, Vladimir and Bojović, Bogdan and Novak, Tanja",
year = "2023",
abstract = "The paper analyzes the approximation of the ellipsoid by the sphere. Earth is a space body with a mathematically irregular shape, so idealized smooth surfaces are used for calculations. The first is the geoid, a smooth, equipotential surface that best approximates mean sea level. However, the geoid does not have an analytical form and is unsuitable for many applications, so an ellipsoid is used for approximation. In applications where high accuracy is not required (e.g., with small scale maps), the ellipsoid is approximated by a sphere. The radius of the sphere can be calculated in three ways: according to the equivalent volume criterion, according to the equivalent surface criterion, or as the mean value of the three semi-axes of the ellipsoid. All three methods of approximation were tested by calculating the length of the geodetic line on the ellipsoid, the orthodrome on the spheres and then the error. Also, the influence of latitude on the error value was tested. For three different values of geographic latitude, the lengths of geodetic lines up to one hundred points were calculated (using the Bessel method for solving the second main geodetic task on the ellipsoid), as well as the lengths of the orthodromes on the spheres, with the radii of the spheres determined in the three mentioned ways. The obtained results were then analyzed and discussed.",
publisher = "Subotica, Srbija: Građevinski fakultet Univerziteta Novi Sad",
journal = "Journal of Faculty of Civil Engineering",
title = "Comparative analysis of the ellipsoid approximation with the sphere",
volume = "39",
number = "44",
pages = "89-105",
doi = "10.14415/JFCE-900"
}

Borisov, M., Vrtunski, M., Petrović, V., Bojović, B.,& Novak, T.. (2023). Comparative analysis of the ellipsoid approximation with the sphere. in Journal of Faculty of Civil Engineering
Subotica, Srbija: Građevinski fakultet Univerziteta Novi Sad., 39(44), 89-105.
https://doi.org/10.14415/JFCE-900

Borisov M, Vrtunski M, Petrović V, Bojović B, Novak T. Comparative analysis of the ellipsoid approximation with the sphere. in Journal of Faculty of Civil Engineering. 2023;39(44):89-105.
doi:10.14415/JFCE-900 .

Borisov, Mirko, Vrtunski, Milan, Petrović, Vladimir, Bojović, Bogdan, Novak, Tanja, "Comparative analysis of the ellipsoid approximation with the sphere" in Journal of Faculty of Civil Engineering, 39, no. 44 (2023):89-105,
https://doi.org/10.14415/JFCE-900 . .

TY  - CONF
AU  - Petrović, Vladimir M.
AU  - Bojović, Bogdan B.
AU  - Đurić, Tatjana
AU  - Borisov, Mirko
AU  - Ilić, Zoran
AU  - Rakićević, Nenad
PY  - 2022
UR  - https://cer.ihtm.bg.ac.rs/handle/123456789/7039
AB  - This paper presents GIS/3D solutions and their application in agriculture. Further, the possibilities of obtaining information important for planning the development of viticulture, fruit growing and farming are analysed and presented. Until now, maps have been most commonly used as models for terrain analysis. The main weaknesses of the maps are content freezing and difficult 3D analysis. With the advent of geoinformation technologies, the way of processing is changing and the concept of GIS/3D data modelling is being emphasized. The aim of this paper are new solutions that provide an efficient opportunity in field analysis and resource management in agriculture. An algorithm has been designed where, based on the given criteria (terrain slope, aspekt, vegetation index, altitude), representations of potential areas for growing certain crops are obtained. The results show numerous possibilities of GIS methodology for agricultural crop management, in this specific case of viticulture, arable farming and fruit growing. Also, the results in the form of geostatistical maps provide a more precise insight and serve as a basis for better decision-making in agriculture. The area of interest includes the Srem district, which is located in the northern part of the Republic of Serbia. This district is a resource of great importance for the further development of agriculture, of which viticulture and fruit growing are of special importance. For planning the development of agriculture in an area, it is necessary to have information related to both the assessment of land suitability and land valuation for certain agricultural species in order to be able to assign the optimal purpose.
PB  - Faculty of Civil Engineering, University of Montenegro
C3  - The 8th international conference "Civil engineering – science and practice", GNP 2022 - 8-12 March 2022 Kolašin, Montenegro
T1  - GIS / 3D solutions in the function of management improvement in agriculture
SP  - 959
EP  - 968
UR  - https://hdl.handle.net/21.15107/rcub_cer_7039
ER  - 

@conference{
author = "Petrović, Vladimir M. and Bojović, Bogdan B. and Đurić, Tatjana and Borisov, Mirko and Ilić, Zoran and Rakićević, Nenad",
year = "2022",
abstract = "This paper presents GIS/3D solutions and their application in agriculture. Further, the possibilities of obtaining information important for planning the development of viticulture, fruit growing and farming are analysed and presented. Until now, maps have been most commonly used as models for terrain analysis. The main weaknesses of the maps are content freezing and difficult 3D analysis. With the advent of geoinformation technologies, the way of processing is changing and the concept of GIS/3D data modelling is being emphasized. The aim of this paper are new solutions that provide an efficient opportunity in field analysis and resource management in agriculture. An algorithm has been designed where, based on the given criteria (terrain slope, aspekt, vegetation index, altitude), representations of potential areas for growing certain crops are obtained. The results show numerous possibilities of GIS methodology for agricultural crop management, in this specific case of viticulture, arable farming and fruit growing. Also, the results in the form of geostatistical maps provide a more precise insight and serve as a basis for better decision-making in agriculture. The area of interest includes the Srem district, which is located in the northern part of the Republic of Serbia. This district is a resource of great importance for the further development of agriculture, of which viticulture and fruit growing are of special importance. For planning the development of agriculture in an area, it is necessary to have information related to both the assessment of land suitability and land valuation for certain agricultural species in order to be able to assign the optimal purpose.",
publisher = "Faculty of Civil Engineering, University of Montenegro",
journal = "The 8th international conference "Civil engineering – science and practice", GNP 2022 - 8-12 March 2022 Kolašin, Montenegro",
title = "GIS / 3D solutions in the function of management improvement in agriculture",
pages = "959-968",
url = "https://hdl.handle.net/21.15107/rcub_cer_7039"
}

Petrović, V. M., Bojović, B. B., Đurić, T., Borisov, M., Ilić, Z.,& Rakićević, N.. (2022). GIS / 3D solutions in the function of management improvement in agriculture. in The 8th international conference "Civil engineering – science and practice", GNP 2022 - 8-12 March 2022 Kolašin, Montenegro
Faculty of Civil Engineering, University of Montenegro., 959-968.
https://hdl.handle.net/21.15107/rcub_cer_7039

Petrović VM, Bojović BB, Đurić T, Borisov M, Ilić Z, Rakićević N. GIS / 3D solutions in the function of management improvement in agriculture. in The 8th international conference "Civil engineering – science and practice", GNP 2022 - 8-12 March 2022 Kolašin, Montenegro. 2022;:959-968.
https://hdl.handle.net/21.15107/rcub_cer_7039 .

Petrović, Vladimir M., Bojović, Bogdan B., Đurić, Tatjana, Borisov, Mirko, Ilić, Zoran, Rakićević, Nenad, "GIS / 3D solutions in the function of management improvement in agriculture" in The 8th international conference "Civil engineering – science and practice", GNP 2022 - 8-12 March 2022 Kolašin, Montenegro (2022):959-968,
https://hdl.handle.net/21.15107/rcub_cer_7039 .

TY  - JOUR
AU  - Petrović, Vladimir M.
AU  - Bojović, Bogdan B.
AU  - Radišić, Anđela
AU  - Radojčić, Stevan
AU  - Borisov, Mirko
PY  - 2022
UR  - https://cer.ihtm.bg.ac.rs/handle/123456789/5637
AB  - This paper deals with the problem of Bessel procedures and processes in solving the main geodetic problems on an ellipsoid. There are a number of methods for solving the main geodetic tasks on the Earth's ellipsoid. They can be grouped into three categories, ie models for: short distances (up to 200 km), medium distances (200 to 1000 km) and long distances (over 1000 km). The aim of this paper is the application of the methodology for solving the main geodetic tasks for all distances on the eelipsoid, ie the application of one universal method. Since this method is iterative, the modern way of its implementation is a significant relief compared to its application in the past when there were no software designs and automated procedures. From the obtained results and length values, numerous analysis and conclusions can be derived, ie, process monitoring and error growth trend with increasing distance.
PB  - Udruženje inženjera građevinarstva, geotehnike, arhitekture i urbanista
T2  - Izgradnja / Construction
T1  - Analiza Beselovih postupaka kod rešavanja glavnih geodetskih zadataka na elipsoidu
T1  - Analysis of Bessel procedures in solving the main  geodetic tasks on an ellipsoid
VL  - 76
IS  - 1-4
SP  - 64
EP  - 72
UR  - https://hdl.handle.net/21.15107/rcub_cer_5637
ER  - 

@article{
author = "Petrović, Vladimir M. and Bojović, Bogdan B. and Radišić, Anđela and Radojčić, Stevan and Borisov, Mirko",
year = "2022",
abstract = "This paper deals with the problem of Bessel procedures and processes in solving the main geodetic problems on an ellipsoid. There are a number of methods for solving the main geodetic tasks on the Earth's ellipsoid. They can be grouped into three categories, ie models for: short distances (up to 200 km), medium distances (200 to 1000 km) and long distances (over 1000 km). The aim of this paper is the application of the methodology for solving the main geodetic tasks for all distances on the eelipsoid, ie the application of one universal method. Since this method is iterative, the modern way of its implementation is a significant relief compared to its application in the past when there were no software designs and automated procedures. From the obtained results and length values, numerous analysis and conclusions can be derived, ie, process monitoring and error growth trend with increasing distance.",
publisher = "Udruženje inženjera građevinarstva, geotehnike, arhitekture i urbanista",
journal = "Izgradnja / Construction",
title = "Analiza Beselovih postupaka kod rešavanja glavnih geodetskih zadataka na elipsoidu, Analysis of Bessel procedures in solving the main  geodetic tasks on an ellipsoid",
volume = "76",
number = "1-4",
pages = "64-72",
url = "https://hdl.handle.net/21.15107/rcub_cer_5637"
}

Petrović, V. M., Bojović, B. B., Radišić, A., Radojčić, S.,& Borisov, M.. (2022). Analiza Beselovih postupaka kod rešavanja glavnih geodetskih zadataka na elipsoidu. in Izgradnja / Construction
Udruženje inženjera građevinarstva, geotehnike, arhitekture i urbanista., 76(1-4), 64-72.
https://hdl.handle.net/21.15107/rcub_cer_5637

Petrović VM, Bojović BB, Radišić A, Radojčić S, Borisov M. Analiza Beselovih postupaka kod rešavanja glavnih geodetskih zadataka na elipsoidu. in Izgradnja / Construction. 2022;76(1-4):64-72.
https://hdl.handle.net/21.15107/rcub_cer_5637 .

Petrović, Vladimir M., Bojović, Bogdan B., Radišić, Anđela, Radojčić, Stevan, Borisov, Mirko, "Analiza Beselovih postupaka kod rešavanja glavnih geodetskih zadataka na elipsoidu" in Izgradnja / Construction, 76, no. 1-4 (2022):64-72,
https://hdl.handle.net/21.15107/rcub_cer_5637 .

TY  - JOUR
AU  - Bojović, Bogdan B.
AU  - Petrović, Vladimir M.
AU  - Radojčić, Stevan
AU  - Ilić, Zoran
AU  - Šormaz, Suzana
PY  - 2022
UR  - https://cer.ihtm.bg.ac.rs/handle/123456789/5636
AB  - Glavni fokus rada je izrada, vizualizacija i analiza kvaliteta 3D modela dobijenih iz snimaka bespilotnih letelica - UAV (Unmanned Aerial Vehicle). Analiza prikaza i kvaliteta 3D modela ukljueuje stepen odstupanja geometrijskih karakteristika objekata u različitim modelima i formatima, odnosno u softverskim okruženjima. Proces prikupljanja i obrade podataka je opisan  
pa fazama, kao i njihova naknadna vizualizacija u dva različita softverska okruženja - Agisoft  
Metashape i Pix4Dmapper. Kao rezultat obrade u datim softverima, dobijeni su digitalni model  
visina (DMV) i digitalni model povdi (DMP). Analiza i poređenje kvaliteta obavljeni su kreiranjem aplikacije GUI (graphical user interface) kroz interakciju grafičkih i tekstualnih podataka u programskom paketu MatLAB.
AB  - The main focus of the paper is the creating, visualization and analysis of the quality of 3D models obtained from images of Unmanned Aerial Vehicles (UAV). The analysis of the display and quality of 3D models includes the degree of deviation of the geometric characteristics of objects in different models and formats, ie in software environments. The process of data collection and processing is described in stages, as well as their subsequent visualization in two different software solutions - Agisoft Metashape and Pix4Dmapper. As a result of processing in the given software, digital elevation models (DEM) and digital surface model (DSM) were obtained. Quality analysis and comparison were performed by creating a GUI application (graphical user interface) through the interaction of graphic and textual data in the MatLAB software package.
PB  - Udruženje inženjera građevinarstva, geotehnike, arhitekture i urbanista
T2  - Izgradnja / Construction
T1  - Creation and analysis of 3d models based on uav images
T1  - Izrada i analiza 3d modela na osnovu uav snimaka
VL  - 76
IS  - 1-4
SP  - 55
EP  - 63
UR  - https://hdl.handle.net/21.15107/rcub_cer_5636
ER  - 

@article{
author = "Bojović, Bogdan B. and Petrović, Vladimir M. and Radojčić, Stevan and Ilić, Zoran and Šormaz, Suzana",
year = "2022",
abstract = "Glavni fokus rada je izrada, vizualizacija i analiza kvaliteta 3D modela dobijenih iz snimaka bespilotnih letelica - UAV (Unmanned Aerial Vehicle). Analiza prikaza i kvaliteta 3D modela ukljueuje stepen odstupanja geometrijskih karakteristika objekata u različitim modelima i formatima, odnosno u softverskim okruženjima. Proces prikupljanja i obrade podataka je opisan  
pa fazama, kao i njihova naknadna vizualizacija u dva različita softverska okruženja - Agisoft  
Metashape i Pix4Dmapper. Kao rezultat obrade u datim softverima, dobijeni su digitalni model  
visina (DMV) i digitalni model povdi (DMP). Analiza i poređenje kvaliteta obavljeni su kreiranjem aplikacije GUI (graphical user interface) kroz interakciju grafičkih i tekstualnih podataka u programskom paketu MatLAB., The main focus of the paper is the creating, visualization and analysis of the quality of 3D models obtained from images of Unmanned Aerial Vehicles (UAV). The analysis of the display and quality of 3D models includes the degree of deviation of the geometric characteristics of objects in different models and formats, ie in software environments. The process of data collection and processing is described in stages, as well as their subsequent visualization in two different software solutions - Agisoft Metashape and Pix4Dmapper. As a result of processing in the given software, digital elevation models (DEM) and digital surface model (DSM) were obtained. Quality analysis and comparison were performed by creating a GUI application (graphical user interface) through the interaction of graphic and textual data in the MatLAB software package.",
publisher = "Udruženje inženjera građevinarstva, geotehnike, arhitekture i urbanista",
journal = "Izgradnja / Construction",
title = "Creation and analysis of 3d models based on uav images, Izrada i analiza 3d modela na osnovu uav snimaka",
volume = "76",
number = "1-4",
pages = "55-63",
url = "https://hdl.handle.net/21.15107/rcub_cer_5636"
}

Bojović, B. B., Petrović, V. M., Radojčić, S., Ilić, Z.,& Šormaz, S.. (2022). Creation and analysis of 3d models based on uav images. in Izgradnja / Construction
Udruženje inženjera građevinarstva, geotehnike, arhitekture i urbanista., 76(1-4), 55-63.
https://hdl.handle.net/21.15107/rcub_cer_5636

Bojović BB, Petrović VM, Radojčić S, Ilić Z, Šormaz S. Creation and analysis of 3d models based on uav images. in Izgradnja / Construction. 2022;76(1-4):55-63.
https://hdl.handle.net/21.15107/rcub_cer_5636 .

Bojović, Bogdan B., Petrović, Vladimir M., Radojčić, Stevan, Ilić, Zoran, Šormaz, Suzana, "Creation and analysis of 3d models based on uav images" in Izgradnja / Construction, 76, no. 1-4 (2022):55-63,
https://hdl.handle.net/21.15107/rcub_cer_5636 .

TY  - JOUR
AU  - Vulić, Ivan
AU  - Borisov, Mirko
AU  - Prodanović, Radomir
AU  - Rančić, Dejan
AU  - Petrović, Vladimir M.
AU  - Stankovski, Stevan
AU  - Ostojić, Gordana
PY  - 2022
UR  - https://cer.ihtm.bg.ac.rs/handle/123456789/5393
AB  - The quality of DEMs is especially being considered based on the spatial resolution of the created digital models and the type of terrain of the interest area. DEM analysis was performed specifically for LiDAR-based DEMs, as well as a comparison with results obtained using the radar recording method (Shuttle Radar Topography Mission). The application of DEM data for security-sensitive systems requires the fulfillment of security requirements, such as authenticity, integrity, confidentiality, and non-repudiation. For this purpose, the authors have developed a model for non-repudiation and protecting DEM data. The model simulation shows it is possible to detect even the smallest changes made in the transmission or the DEM location, as well as proving the data authenticity and non-repudiation of the sender. DEM data security testing has shown that DEM data is effectively protected from the source of origin to the end entity location.
PB  - Switzerland : Multidisciplinary Digital Publishing Institute (MDPI)
T2  - Applied Sciences (Switzerland)
T1  - Protection of Digital Elevation Model - One Approach
VL  - 12
IS  - 19
SP  - 9898
DO  - 10.3390/app12199898
ER  - 

@article{
author = "Vulić, Ivan and Borisov, Mirko and Prodanović, Radomir and Rančić, Dejan and Petrović, Vladimir M. and Stankovski, Stevan and Ostojić, Gordana",
year = "2022",
abstract = "The quality of DEMs is especially being considered based on the spatial resolution of the created digital models and the type of terrain of the interest area. DEM analysis was performed specifically for LiDAR-based DEMs, as well as a comparison with results obtained using the radar recording method (Shuttle Radar Topography Mission). The application of DEM data for security-sensitive systems requires the fulfillment of security requirements, such as authenticity, integrity, confidentiality, and non-repudiation. For this purpose, the authors have developed a model for non-repudiation and protecting DEM data. The model simulation shows it is possible to detect even the smallest changes made in the transmission or the DEM location, as well as proving the data authenticity and non-repudiation of the sender. DEM data security testing has shown that DEM data is effectively protected from the source of origin to the end entity location.",
publisher = "Switzerland : Multidisciplinary Digital Publishing Institute (MDPI)",
journal = "Applied Sciences (Switzerland)",
title = "Protection of Digital Elevation Model - One Approach",
volume = "12",
number = "19",
pages = "9898",
doi = "10.3390/app12199898"
}

Vulić, I., Borisov, M., Prodanović, R., Rančić, D., Petrović, V. M., Stankovski, S.,& Ostojić, G.. (2022). Protection of Digital Elevation Model - One Approach. in Applied Sciences (Switzerland)
Switzerland : Multidisciplinary Digital Publishing Institute (MDPI)., 12(19), 9898.
https://doi.org/10.3390/app12199898

Vulić I, Borisov M, Prodanović R, Rančić D, Petrović VM, Stankovski S, Ostojić G. Protection of Digital Elevation Model - One Approach. in Applied Sciences (Switzerland). 2022;12(19):9898.
doi:10.3390/app12199898 .

Vulić, Ivan, Borisov, Mirko, Prodanović, Radomir, Rančić, Dejan, Petrović, Vladimir M., Stankovski, Stevan, Ostojić, Gordana, "Protection of Digital Elevation Model - One Approach" in Applied Sciences (Switzerland), 12, no. 19 (2022):9898,
https://doi.org/10.3390/app12199898 . .

TY  - JOUR
AU  - Borisov, Mirko
AU  - Simić, Radovan
AU  - Petrović, Vladimir M.
AU  - Milinčić, Miroljub
PY  - 2021
UR  - http://www.suggsbih.ba/GEODETSKI%20GLASNIK/GEODETSKI_GLASNIK_52/gg_52_1_e.htm
UR  - https://cer.ihtm.bg.ac.rs/handle/123456789/7038
AB  - The main focus of the paper is the
assessment of the quality of the 3D terrain
models obtained from the images of
unmanned aerial vehicles (UAV). Quality
and detailed terrain models are necessary,
above all, for precise determination of
changes in the area of excavation. The
quality analysis of the 3D model includes
the degree of deviation of geometric and
geomorphological characteristics from the
actual terrain position and status in
nature. To determine the geometric
accuracy, a comparative method of testing
is used, ie a comparison of the measured
values of the 3D model with the data of
well-defined geodetic and control points a
posteriori measured using the Global
Navigation Satellite Systems (GNSS).
Analysis of quality and comparisons are
performed visually, numerically, by
calculating the excavation volume and
creating a terrain profile. The results
suggest that the 3D models obtained from
the UAV images are of very high quality.
Also, an important advantage of using
UAV images to generate 3D models in the
excavation area is their efficiency, for
example, more frequent updating and
measuring the height of inaccessible
terrain and determining local changes in
the terrain..
AB  - Glavni fokus rada je procjena kvaliteta 3D
modela terena dobijenih iz snimaka bespilotnih
letjelica (UAV). Kvalitetni i detaljni modeli
terena neophodni su, prije svega, za precizno
određivanje promjena na području iskopa
zemljišta. Analiza kvaliteta 3D modela
uključuje stepen odstupanja geometrijskih i
geomorfoloških karakteristika od stvarnog
položaja terena i statusa u prirodi. Za
određivanje geometrijske tačnosti primjenjuje
se uporedni način ispitivanja, odnosno
poređenje izmjerenih vrijednosti 3D modela sa
podacima dobro definisanih geodetskih i
kontrolnih tačaka a posteriori mjerenih
primjenom Globalnih Navigacionih Satelitskih
Sistema (GNSS). Analiza kvaliteta i poređenja
se obavljaju vizualno, numerički,
sračunavanjem zapremine iskopa i izradom
profila terena. Rezultati sugerišu da su 3D
modeli dobijeni iz snimaka UAV-a veoma
kvalitetni. Takođe, važna prednost korišćenja
slika UAV-a za generisanje 3D modela na
području iskopa je njihova efikasnost, na
primjer, češće ažuriranje i mjerenje visina
nepristupačnog terena i određivanje lokalnih
promjena na terenu.
PB  - Sarajevo, Bosna i Hercegovina : Savez udruženja građana geodetske struke u Bosni i Hercegovini
T2  - Geodetski glasnik
T1  - Analiza kvaliteta 3d modela zasnovanih na digitalnoj fotogrametriji
T1  - Quality analysis of 3d models based on digital photogrammetry
VL  - 55
IS  - 52
SP  - 5
EP  - 26
UR  - https://hdl.handle.net/21.15107/rcub_cer_7038
ER  - 

@article{
author = "Borisov, Mirko and Simić, Radovan and Petrović, Vladimir M. and Milinčić, Miroljub",
year = "2021",
abstract = "The main focus of the paper is the
assessment of the quality of the 3D terrain
models obtained from the images of
unmanned aerial vehicles (UAV). Quality
and detailed terrain models are necessary,
above all, for precise determination of
changes in the area of excavation. The
quality analysis of the 3D model includes
the degree of deviation of geometric and
geomorphological characteristics from the
actual terrain position and status in
nature. To determine the geometric
accuracy, a comparative method of testing
is used, ie a comparison of the measured
values of the 3D model with the data of
well-defined geodetic and control points a
posteriori measured using the Global
Navigation Satellite Systems (GNSS).
Analysis of quality and comparisons are
performed visually, numerically, by
calculating the excavation volume and
creating a terrain profile. The results
suggest that the 3D models obtained from
the UAV images are of very high quality.
Also, an important advantage of using
UAV images to generate 3D models in the
excavation area is their efficiency, for
example, more frequent updating and
measuring the height of inaccessible
terrain and determining local changes in
the terrain.., Glavni fokus rada je procjena kvaliteta 3D
modela terena dobijenih iz snimaka bespilotnih
letjelica (UAV). Kvalitetni i detaljni modeli
terena neophodni su, prije svega, za precizno
određivanje promjena na području iskopa
zemljišta. Analiza kvaliteta 3D modela
uključuje stepen odstupanja geometrijskih i
geomorfoloških karakteristika od stvarnog
položaja terena i statusa u prirodi. Za
određivanje geometrijske tačnosti primjenjuje
se uporedni način ispitivanja, odnosno
poređenje izmjerenih vrijednosti 3D modela sa
podacima dobro definisanih geodetskih i
kontrolnih tačaka a posteriori mjerenih
primjenom Globalnih Navigacionih Satelitskih
Sistema (GNSS). Analiza kvaliteta i poređenja
se obavljaju vizualno, numerički,
sračunavanjem zapremine iskopa i izradom
profila terena. Rezultati sugerišu da su 3D
modeli dobijeni iz snimaka UAV-a veoma
kvalitetni. Takođe, važna prednost korišćenja
slika UAV-a za generisanje 3D modela na
području iskopa je njihova efikasnost, na
primjer, češće ažuriranje i mjerenje visina
nepristupačnog terena i određivanje lokalnih
promjena na terenu.",
publisher = "Sarajevo, Bosna i Hercegovina : Savez udruženja građana geodetske struke u Bosni i Hercegovini",
journal = "Geodetski glasnik",
title = "Analiza kvaliteta 3d modela zasnovanih na digitalnoj fotogrametriji, Quality analysis of 3d models based on digital photogrammetry",
volume = "55",
number = "52",
pages = "5-26",
url = "https://hdl.handle.net/21.15107/rcub_cer_7038"
}

Borisov, M., Simić, R., Petrović, V. M.,& Milinčić, M.. (2021). Analiza kvaliteta 3d modela zasnovanih na digitalnoj fotogrametriji. in Geodetski glasnik
Sarajevo, Bosna i Hercegovina : Savez udruženja građana geodetske struke u Bosni i Hercegovini., 55(52), 5-26.
https://hdl.handle.net/21.15107/rcub_cer_7038

Borisov M, Simić R, Petrović VM, Milinčić M. Analiza kvaliteta 3d modela zasnovanih na digitalnoj fotogrametriji. in Geodetski glasnik. 2021;55(52):5-26.
https://hdl.handle.net/21.15107/rcub_cer_7038 .

Borisov, Mirko, Simić, Radovan, Petrović, Vladimir M., Milinčić, Miroljub, "Analiza kvaliteta 3d modela zasnovanih na digitalnoj fotogrametriji" in Geodetski glasnik, 55, no. 52 (2021):5-26,
https://hdl.handle.net/21.15107/rcub_cer_7038 .

TY  - JOUR
AU  - Borisov, Mirko
AU  - Gavrilović, Milan
AU  - Sladić, Dubravka
AU  - Radulović, Aleksandra
AU  - Petrović, Vladimir
PY  - 2020
UR  - https://cer.ihtm.bg.ac.rs/handle/123456789/3574
AB  - The article deals with the length differences between georeference
surfaces within the state coordinate system of Serbia. It’s an
analysis starting from the topography, through geoid and ellipsoid,
to the map projection. During the literature review, analyses
of the length changes from topography to the state map projection
for the geographic territory of Serbia were not found. The
set of initial data consists DEM and the geoid model, as well as
vector data that contain the boundary of the research area.
Calculation will be performed on the basis of 88439 points of
grids, located at a distance of 1 km, while the analysis will be
done by comparing average deformations, extreme deformation
values, percentage of positive and negative values of deformations,
as well as percentage of length without deformations. The
aim of this research is to provide a set of data on length differences
that covers the entire territory of Serbia.
PB  - England : Taylor and Francis Ltd.
T2  - Geocarto International
T1  - Comparative analysis of length differences between georeference surfaces
DO  - 10.1080/10106049.2020.1750065
ER  - 

@article{
author = "Borisov, Mirko and Gavrilović, Milan and Sladić, Dubravka and Radulović, Aleksandra and Petrović, Vladimir",
year = "2020",
abstract = "The article deals with the length differences between georeference
surfaces within the state coordinate system of Serbia. It’s an
analysis starting from the topography, through geoid and ellipsoid,
to the map projection. During the literature review, analyses
of the length changes from topography to the state map projection
for the geographic territory of Serbia were not found. The
set of initial data consists DEM and the geoid model, as well as
vector data that contain the boundary of the research area.
Calculation will be performed on the basis of 88439 points of
grids, located at a distance of 1 km, while the analysis will be
done by comparing average deformations, extreme deformation
values, percentage of positive and negative values of deformations,
as well as percentage of length without deformations. The
aim of this research is to provide a set of data on length differences
that covers the entire territory of Serbia.",
publisher = "England : Taylor and Francis Ltd.",
journal = "Geocarto International",
title = "Comparative analysis of length differences between georeference surfaces",
doi = "10.1080/10106049.2020.1750065"
}

Borisov, M., Gavrilović, M., Sladić, D., Radulović, A.,& Petrović, V.. (2020). Comparative analysis of length differences between georeference surfaces. in Geocarto International
England : Taylor and Francis Ltd...
https://doi.org/10.1080/10106049.2020.1750065

Borisov M, Gavrilović M, Sladić D, Radulović A, Petrović V. Comparative analysis of length differences between georeference surfaces. in Geocarto International. 2020;.
doi:10.1080/10106049.2020.1750065 .

Borisov, Mirko, Gavrilović, Milan, Sladić, Dubravka, Radulović, Aleksandra, Petrović, Vladimir, "Comparative analysis of length differences between georeference surfaces" in Geocarto International (2020),
https://doi.org/10.1080/10106049.2020.1750065 . .

TY  - JOUR
AU  - Borisov, Mirko
AU  - Gavrilović, Milan
AU  - Sladić, Dubravka
AU  - Radulović, Aleksandra
AU  - Petrović, Vladimir
PY  - 2020
UR  - https://cer.ihtm.bg.ac.rs/handle/123456789/3622
AB  - The article deals with the length differences between georeferencesurfaces within the state coordinate system of Serbia. It’s ananalysis starting from the topography, through geoid and ellipsoid,to the map projection. During the literature review, analysesof the length changes from topography to the state map projectionfor the geographic territory of Serbia were not found. Theset of initial data consists DEM and the geoid model, as well asvector data that contain the boundary of the research area.Calculation will be performed on the basis of 88439 points ofgrids, located at a distance of 1 km, while the analysis will bedone by comparing average deformations, extreme deformationvalues, percentage of positive and negative values of deformations,as well as percentage of length without deformations. Theaim of this research is to provide a set of data on length differencesthat covers the entire territory of Serbia.
PB  - England : Taylor and Francis Ltd.
T2  - Geocarto International
T1  - Comparative analysis of length differences between georeference surfaces
DO  - 10.1080/10106049.2020.1750065
ER  - 

@article{
author = "Borisov, Mirko and Gavrilović, Milan and Sladić, Dubravka and Radulović, Aleksandra and Petrović, Vladimir",
year = "2020",
abstract = "The article deals with the length differences between georeferencesurfaces within the state coordinate system of Serbia. It’s ananalysis starting from the topography, through geoid and ellipsoid,to the map projection. During the literature review, analysesof the length changes from topography to the state map projectionfor the geographic territory of Serbia were not found. Theset of initial data consists DEM and the geoid model, as well asvector data that contain the boundary of the research area.Calculation will be performed on the basis of 88439 points ofgrids, located at a distance of 1 km, while the analysis will bedone by comparing average deformations, extreme deformationvalues, percentage of positive and negative values of deformations,as well as percentage of length without deformations. Theaim of this research is to provide a set of data on length differencesthat covers the entire territory of Serbia.",
publisher = "England : Taylor and Francis Ltd.",
journal = "Geocarto International",
title = "Comparative analysis of length differences between georeference surfaces",
doi = "10.1080/10106049.2020.1750065"
}

Borisov, M., Gavrilović, M., Sladić, D., Radulović, A.,& Petrović, V.. (2020). Comparative analysis of length differences between georeference surfaces. in Geocarto International
England : Taylor and Francis Ltd...
https://doi.org/10.1080/10106049.2020.1750065

Borisov M, Gavrilović M, Sladić D, Radulović A, Petrović V. Comparative analysis of length differences between georeference surfaces. in Geocarto International. 2020;.
doi:10.1080/10106049.2020.1750065 .

Borisov, Mirko, Gavrilović, Milan, Sladić, Dubravka, Radulović, Aleksandra, Petrović, Vladimir, "Comparative analysis of length differences between georeference surfaces" in Geocarto International (2020),
https://doi.org/10.1080/10106049.2020.1750065 . .

TY  - CONF
AU  - Borisov, Mirko
AU  - Mijić, Nikolina
AU  - Bugarin,Tanja
AU  - Petrović, Vladimir
AU  - Sabo, Filip
PY  - 2020
UR  - https://cer.ihtm.bg.ac.rs/handle/123456789/3252
AB  - Users of digital elevation models must be aware of their main characteristics in order to judge better their suitability for a specific application. This paper describes concept of creating and applying of the 3D model based on the satellite images. The quality and loyalty of the elevation model of the terrain depends of the data which are collected, i.e. on the type and resolution of the satellite images, horizontal and vertical datum, but also on the way of interpretation and visualization of the 3D model. On the other hand, the organization and structure of data are influencing on the creation of the 3D model.
PB  - Springer Science and Business Media LLC
C3  - Advanced Technologies, Systems, and Applications IV -Proceedings of the International Symposium on Innovative and Interdisciplinary Applications of Advanced Technologies (IAT 2019). IAT 2019. Lecture Notes in Networks and Systems
T1  - The Concept and Application of the 3D Model Based on the Satellite Images
VL  - 83
SP  - 290
EP  - 304
DO  - 10.1007/978-3-030-24986-1_23
ER  - 

@conference{
author = "Borisov, Mirko and Mijić, Nikolina and Bugarin,Tanja and Petrović, Vladimir and Sabo, Filip",
year = "2020",
abstract = "Users of digital elevation models must be aware of their main characteristics in order to judge better their suitability for a specific application. This paper describes concept of creating and applying of the 3D model based on the satellite images. The quality and loyalty of the elevation model of the terrain depends of the data which are collected, i.e. on the type and resolution of the satellite images, horizontal and vertical datum, but also on the way of interpretation and visualization of the 3D model. On the other hand, the organization and structure of data are influencing on the creation of the 3D model.",
publisher = "Springer Science and Business Media LLC",
journal = "Advanced Technologies, Systems, and Applications IV -Proceedings of the International Symposium on Innovative and Interdisciplinary Applications of Advanced Technologies (IAT 2019). IAT 2019. Lecture Notes in Networks and Systems",
title = "The Concept and Application of the 3D Model Based on the Satellite Images",
volume = "83",
pages = "290-304",
doi = "10.1007/978-3-030-24986-1_23"
}

Borisov, M., Mijić, N., Bugarin, T., Petrović, V.,& Sabo, F.. (2020). The Concept and Application of the 3D Model Based on the Satellite Images. in Advanced Technologies, Systems, and Applications IV -Proceedings of the International Symposium on Innovative and Interdisciplinary Applications of Advanced Technologies (IAT 2019). IAT 2019. Lecture Notes in Networks and Systems
Springer Science and Business Media LLC., 83, 290-304.
https://doi.org/10.1007/978-3-030-24986-1_23

Borisov M, Mijić N, Bugarin T, Petrović V, Sabo F. The Concept and Application of the 3D Model Based on the Satellite Images. in Advanced Technologies, Systems, and Applications IV -Proceedings of the International Symposium on Innovative and Interdisciplinary Applications of Advanced Technologies (IAT 2019). IAT 2019. Lecture Notes in Networks and Systems. 2020;83:290-304.
doi:10.1007/978-3-030-24986-1_23 .

Borisov, Mirko, Mijić, Nikolina, Bugarin,Tanja, Petrović, Vladimir, Sabo, Filip, "The Concept and Application of the 3D Model Based on the Satellite Images" in Advanced Technologies, Systems, and Applications IV -Proceedings of the International Symposium on Innovative and Interdisciplinary Applications of Advanced Technologies (IAT 2019). IAT 2019. Lecture Notes in Networks and Systems, 83 (2020):290-304,
https://doi.org/10.1007/978-3-030-24986-1_23 . .

TY  - JOUR
AU  - Borisov, Mirko
AU  - Pal, Andrej
AU  - Vrtunski, Milan
AU  - Jovanović, Dušan
AU  - Petrović, Vladimir M.
AU  - Vulić, Milivoj
PY  - 2019
UR  - https://cer.ihtm.bg.ac.rs/handle/123456789/3929
AB  - In this paper several well-known filtering techniques were compared in the purpose of automatic line generalization. The used methods for line simplification are digital first order low-pass filter, Savitzky-Golay (SG) filter and Whittaker filter. Two versions of the algorithm for line feature generalization were tested, from source scale 1:25 000 towards target scale of 1:100 000 and from source scale 1:25 000 towards scale of 1:50 000. Also, GPS data filtering for the target scale 1:50 000 was tested. The first version of the algorithm considers that there are no control data, and the filtering parameter is dictated by the desired accuracy for the target scale. The second version involves control data in the target scale. This means that the optimal value for the filtering parameter is the value for which the difference between input and control data is the smallest. Analysis showed that the SG filter yielded the best results in general. The proposed filters can be considered as a new solution for automated cartographic line simplification.
PB  - Croatia : Faculty of Mechanical Engineering in Slavonski Brod
PB  - Croatia : Faculty of Electrical Engineering in Osijek
PB  - Croatia : Faculty of Civil Engineering in Osijek
T2  - Tehnički Vjesnik
T1  - Preliminary Analysis of Quality of Contour Lines Using Smoothing Algorithms
VL  - 26
IS  - 5
DO  - 10.17559/TV-20180827150721
ER  - 

@article{
author = "Borisov, Mirko and Pal, Andrej and Vrtunski, Milan and Jovanović, Dušan and Petrović, Vladimir M. and Vulić, Milivoj",
year = "2019",
abstract = "In this paper several well-known filtering techniques were compared in the purpose of automatic line generalization. The used methods for line simplification are digital first order low-pass filter, Savitzky-Golay (SG) filter and Whittaker filter. Two versions of the algorithm for line feature generalization were tested, from source scale 1:25 000 towards target scale of 1:100 000 and from source scale 1:25 000 towards scale of 1:50 000. Also, GPS data filtering for the target scale 1:50 000 was tested. The first version of the algorithm considers that there are no control data, and the filtering parameter is dictated by the desired accuracy for the target scale. The second version involves control data in the target scale. This means that the optimal value for the filtering parameter is the value for which the difference between input and control data is the smallest. Analysis showed that the SG filter yielded the best results in general. The proposed filters can be considered as a new solution for automated cartographic line simplification.",
publisher = "Croatia : Faculty of Mechanical Engineering in Slavonski Brod, Croatia : Faculty of Electrical Engineering in Osijek, Croatia : Faculty of Civil Engineering in Osijek",
journal = "Tehnički Vjesnik",
title = "Preliminary Analysis of Quality of Contour Lines Using Smoothing Algorithms",
volume = "26",
number = "5",
doi = "10.17559/TV-20180827150721"
}

Borisov, M., Pal, A., Vrtunski, M., Jovanović, D., Petrović, V. M.,& Vulić, M.. (2019). Preliminary Analysis of Quality of Contour Lines Using Smoothing Algorithms. in Tehnički Vjesnik
Croatia : Faculty of Mechanical Engineering in Slavonski Brod., 26(5).
https://doi.org/10.17559/TV-20180827150721

Borisov M, Pal A, Vrtunski M, Jovanović D, Petrović VM, Vulić M. Preliminary Analysis of Quality of Contour Lines Using Smoothing Algorithms. in Tehnički Vjesnik. 2019;26(5).
doi:10.17559/TV-20180827150721 .

Borisov, Mirko, Pal, Andrej, Vrtunski, Milan, Jovanović, Dušan, Petrović, Vladimir M., Vulić, Milivoj, "Preliminary Analysis of Quality of Contour Lines Using Smoothing Algorithms" in Tehnički Vjesnik, 26, no. 5 (2019),
https://doi.org/10.17559/TV-20180827150721 . .

TY  - JOUR
AU  - Borisov, Mirko
AU  - Simić, Radovan
AU  - Petrović, Vladimir
AU  - Bojović, Bogdan B.
PY  - 2019
UR  - https://cer.ihtm.bg.ac.rs/handle/123456789/3456
AB  - The paper discusses the concept of construction and monitoring of
capacity changes - the volume of the "Garajevac-Istok" excavation
(mine), located in the cadastral municipality of Novi Bečej. Namely, in
the earlier period, the physical surface of the Earth and geospace in
general were shown two-dimensionally (2D), in a plane, by some of
the cartographic methods (contour lines, points heights, hypsometry)
or three-dimensionally (3D), by modeling of reliefs and relief cards.
The cartographic principles of terrain making and visualizing on relief
mapping models allow the creation of 3D views, but not enough
quality and engineering precise 3D terrain models. In addition, there
is a possibility of quantitative and qualitative assessment of the
terrain on the mentioned models not to be accurate enough.
With new technologies, the 3D geospatial display mode changes, and
the concept of digital terrain modeling (DTM) is being applied. The
main goal of the work is to create 3D models and to give an analysis of
the "Garajevac-Istok" mine for a certain period of exploitation
AB  - U radu se razmatra koncept izrade i praćenja promena kapaciteta - kubature kopa 'Garajevac - istok', koji se nalazi na katastarskoj opštini Novi Bečej. Ranije su se fizička površ Zemlje i geoprostor uopšte prikazivali dvodimenzionalno (2D) u ravni, nekom od kartografskih metoda (izolinije, kote, hipsoskala) ili trodimenzionalno (3D), izradom maketa i reljefnih karata. Kartografski principi izrade i vizualizacije terena na reljefnim kartografskim modelima omogućuju stvaranje 3D prikaza, ali ne i dovoljno kvalitetnog i inženjerski preciznog 3D modela terena. Pritom je mogućnost kvantitativne i kvalitativne ocene terena na pomenutim modelima otežan i nije dovoljno tačan. Sa pojavom novih tehnologija menja se način 3D prikaza geoprostora, odnosno primenjuje se koncept izrade digitalnih modela terena (DMT). Osnovni cilj rada jeste kreiranje 3D modela i uporedna analiza kubature kopa 'Garajevac - istok' za određeni period eksploatacije.
PB  - Beograd : Univerzitet odbrane
T2  - Vojnotehnički glasnik
T1  - Analiza promena kapaciteta kopa 'Garajevac - Istok' primenom GIS tehnologije
T1  - Analysis of the capacity changes in the 'Garajevac-Istok' excavation by applying the GIS technology
VL  - 67
IS  - 2
SP  - 403
EP  - 430
DO  - 10.5937/vojtehg67-19650
ER  - 

@article{
author = "Borisov, Mirko and Simić, Radovan and Petrović, Vladimir and Bojović, Bogdan B.",
year = "2019",
abstract = "The paper discusses the concept of construction and monitoring of
capacity changes - the volume of the "Garajevac-Istok" excavation
(mine), located in the cadastral municipality of Novi Bečej. Namely, in
the earlier period, the physical surface of the Earth and geospace in
general were shown two-dimensionally (2D), in a plane, by some of
the cartographic methods (contour lines, points heights, hypsometry)
or three-dimensionally (3D), by modeling of reliefs and relief cards.
The cartographic principles of terrain making and visualizing on relief
mapping models allow the creation of 3D views, but not enough
quality and engineering precise 3D terrain models. In addition, there
is a possibility of quantitative and qualitative assessment of the
terrain on the mentioned models not to be accurate enough.
With new technologies, the 3D geospatial display mode changes, and
the concept of digital terrain modeling (DTM) is being applied. The
main goal of the work is to create 3D models and to give an analysis of
the "Garajevac-Istok" mine for a certain period of exploitation, U radu se razmatra koncept izrade i praćenja promena kapaciteta - kubature kopa 'Garajevac - istok', koji se nalazi na katastarskoj opštini Novi Bečej. Ranije su se fizička površ Zemlje i geoprostor uopšte prikazivali dvodimenzionalno (2D) u ravni, nekom od kartografskih metoda (izolinije, kote, hipsoskala) ili trodimenzionalno (3D), izradom maketa i reljefnih karata. Kartografski principi izrade i vizualizacije terena na reljefnim kartografskim modelima omogućuju stvaranje 3D prikaza, ali ne i dovoljno kvalitetnog i inženjerski preciznog 3D modela terena. Pritom je mogućnost kvantitativne i kvalitativne ocene terena na pomenutim modelima otežan i nije dovoljno tačan. Sa pojavom novih tehnologija menja se način 3D prikaza geoprostora, odnosno primenjuje se koncept izrade digitalnih modela terena (DMT). Osnovni cilj rada jeste kreiranje 3D modela i uporedna analiza kubature kopa 'Garajevac - istok' za određeni period eksploatacije.",
publisher = "Beograd : Univerzitet odbrane",
journal = "Vojnotehnički glasnik",
title = "Analiza promena kapaciteta kopa 'Garajevac - Istok' primenom GIS tehnologije, Analysis of the capacity changes in the 'Garajevac-Istok' excavation by applying the GIS technology",
volume = "67",
number = "2",
pages = "403-430",
doi = "10.5937/vojtehg67-19650"
}

Borisov, M., Simić, R., Petrović, V.,& Bojović, B. B.. (2019). Analiza promena kapaciteta kopa 'Garajevac - Istok' primenom GIS tehnologije. in Vojnotehnički glasnik
Beograd : Univerzitet odbrane., 67(2), 403-430.
https://doi.org/10.5937/vojtehg67-19650

Borisov M, Simić R, Petrović V, Bojović BB. Analiza promena kapaciteta kopa 'Garajevac - Istok' primenom GIS tehnologije. in Vojnotehnički glasnik. 2019;67(2):403-430.
doi:10.5937/vojtehg67-19650 .

Borisov, Mirko, Simić, Radovan, Petrović, Vladimir, Bojović, Bogdan B., "Analiza promena kapaciteta kopa 'Garajevac - Istok' primenom GIS tehnologije" in Vojnotehnički glasnik, 67, no. 2 (2019):403-430,
https://doi.org/10.5937/vojtehg67-19650 . .

TY  - JOUR
AU  - Milovanović, Željka
AU  - Popović, Slađana
AU  - Pantelić, Ana
AU  - Milinkov, Jelena R.
AU  - Milošević, Dragana
AU  - Petrović, Vladimir M.
AU  - Vidović, Milka
PY  - 2018
UR  - https://cer.ihtm.bg.ac.rs/handle/123456789/3931
AB  - The ionic content was examined in nine aqueous tea extracts in which time of boiling, acidification of the medium using lemon juice and way of preparation were observed as factors. Ion chromatography was used for determination of inorganic anion content, and data were processed using CANOCO program for multivariate analysis. The variations in ionic content were observed among different tea samples. The highest concentrations of chloride, nitrate, phosphate, and sulphate ions were found in nettle, while the highest concentrations of fluorides were detected in elderflower tea infusion. The effect of boiling time (5, 10, and 20 min), acidification of the medium and different preparation procedure (boiling and cooling at room temperature) were statistically presented using principal component analysis. The examined factors did not have a significant effect on the ionic concentration in tea infusions.
AB  - Јонски садржај испитиван је код девет водених раствора чаја, при чему је на екстракцију јона посматран утицај дужине кувања, киселости средине (која је постигнута додатком лимуновог сока) и начинa припреме. Јонска хроматографија коришћена је за одређивање садржаја неорганских анјона, а пoдаци су обрађени помоћу Canoco програма за мултиваријациону анализу. Јонски садржај варира код различитих узорака чаја. Највеће концентрације хлоридних, нитратних, фосфатних и сулфатних јона одређене су у коприви, док су највеће концентрације флуорида одређене у инфузији кантариона. Утицај времена кључања (5, 10 и 20 мин.), киселост медијума и различити начини припреме (кључање и хлађење на собној температури) статистички су приказани помоћу анализе главних компоненти. Испитивани фактори нису имали значајан утицај на јонску концентрацију у чајним инфузијама.
PB  - Serbia : Matica srpska
T2  - Zbornik Matice Srpske za Prirodne Nauke
T1  - Determination of inorganic anions in herbal tea infusions using ion chromatography
T1  - Određivanje neorganskih jona u rastvoru biljnih čajeva jonskom hromatografijom
IS  - 134
SP  - 89
EP  - 99
DO  - 10.2298/ZMSPN1834089M
ER  - 

@article{
author = "Milovanović, Željka and Popović, Slađana and Pantelić, Ana and Milinkov, Jelena R. and Milošević, Dragana and Petrović, Vladimir M. and Vidović, Milka",
year = "2018",
abstract = "The ionic content was examined in nine aqueous tea extracts in which time of boiling, acidification of the medium using lemon juice and way of preparation were observed as factors. Ion chromatography was used for determination of inorganic anion content, and data were processed using CANOCO program for multivariate analysis. The variations in ionic content were observed among different tea samples. The highest concentrations of chloride, nitrate, phosphate, and sulphate ions were found in nettle, while the highest concentrations of fluorides were detected in elderflower tea infusion. The effect of boiling time (5, 10, and 20 min), acidification of the medium and different preparation procedure (boiling and cooling at room temperature) were statistically presented using principal component analysis. The examined factors did not have a significant effect on the ionic concentration in tea infusions., Јонски садржај испитиван је код девет водених раствора чаја, при чему је на екстракцију јона посматран утицај дужине кувања, киселости средине (која је постигнута додатком лимуновог сока) и начинa припреме. Јонска хроматографија коришћена је за одређивање садржаја неорганских анјона, а пoдаци су обрађени помоћу Canoco програма за мултиваријациону анализу. Јонски садржај варира код различитих узорака чаја. Највеће концентрације хлоридних, нитратних, фосфатних и сулфатних јона одређене су у коприви, док су највеће концентрације флуорида одређене у инфузији кантариона. Утицај времена кључања (5, 10 и 20 мин.), киселост медијума и различити начини припреме (кључање и хлађење на собној температури) статистички су приказани помоћу анализе главних компоненти. Испитивани фактори нису имали значајан утицај на јонску концентрацију у чајним инфузијама.",
publisher = "Serbia : Matica srpska",
journal = "Zbornik Matice Srpske za Prirodne Nauke",
title = "Determination of inorganic anions in herbal tea infusions using ion chromatography, Određivanje neorganskih jona u rastvoru biljnih čajeva jonskom hromatografijom",
number = "134",
pages = "89-99",
doi = "10.2298/ZMSPN1834089M"
}

Milovanović, Ž., Popović, S., Pantelić, A., Milinkov, J. R., Milošević, D., Petrović, V. M.,& Vidović, M.. (2018). Determination of inorganic anions in herbal tea infusions using ion chromatography. in Zbornik Matice Srpske za Prirodne Nauke
Serbia : Matica srpska.(134), 89-99.
https://doi.org/10.2298/ZMSPN1834089M

Milovanović Ž, Popović S, Pantelić A, Milinkov JR, Milošević D, Petrović VM, Vidović M. Determination of inorganic anions in herbal tea infusions using ion chromatography. in Zbornik Matice Srpske za Prirodne Nauke. 2018;(134):89-99.
doi:10.2298/ZMSPN1834089M .

Milovanović, Željka, Popović, Slađana, Pantelić, Ana, Milinkov, Jelena R., Milošević, Dragana, Petrović, Vladimir M., Vidović, Milka, "Determination of inorganic anions in herbal tea infusions using ion chromatography" in Zbornik Matice Srpske za Prirodne Nauke, no. 134 (2018):89-99,
https://doi.org/10.2298/ZMSPN1834089M . .

TY  - CONF
AU  - Veličić, Zorica
AU  - Perendija, Jovana
AU  - Milošević, Dragana
AU  - Milošević, Milena
AU  - Petrović, Vladimir M.
AU  - Trajković, Ivana
AU  - Vidović, Milka
PY  - 2018
UR  - https://cer.ihtm.bg.ac.rs/handle/123456789/7156
AB  - Usled povećane proizvodnje mleka u našoj zemlji tokom poslednjih godina dolazi do otvaranja sve većeg broja malih mlekara različitih proizvodnih kapaciteta, a probleme koji se javljaju u vezi sa otpadnim vodama iz proizvodnje i prerade mleka neophodno je rešavati blagovremeno, na efikasan i ekonomičan način. Mlekarske industrije vrše preradu sirovog mleka u proizvode kao što su mleko za svakodnevnu upotrebu, sir, jogurt i kondezovano mleko, korišćenjem procesa hlađenja, pasterizacije i homogenizacije. Sporedni proizvodi koji nastaju u procesu prerade mleka su mlečna masnoća, surutka i njihovi derivati. Indrustrija mleka generiše u proseku 2,5 do 3,0 litra otpadnih voda po jednom litru obrađenog mleka. Tako nastala otpadna voda sadrži velike količine masnoća, kazeina, laktoze, neorganskih soli, deterdženata i dezinfekcionih sredstava za pranje. Pošto vode ove vrste nose sa sobom velika organska opterećenja, njihovo prečiščavanje zahteva niz tehnoloških postupaka. Stepen njihovog prečišćavanja i kvalitet otpadne vode pre ispuštanja u recipijent u većini slučajeva najlakše se prati preko biološke i hemijske potrošnje kiseonika, amonijaka i pH vrednosti.
PB  - Udruženje za tehnologiju vode i sanitarno inženjerstvo / Association for water technology and sanitary engineering
C3  - 18. međunarodna konferencija „Vodovodni i kanalizacioni sistemi“ (Water supply and sewage systems), Zbornik radova, 30 maj - 01. jun, Jahorina, Pale
T1  - Promena kvaliteta otpadnih voda mlekarske industrije u zavisnosti od različitih tehnoloških procesa
T1  - Change of waste water quality of the dairy industry depending on different technological processes
SP  - 200
EP  - 202
UR  - https://hdl.handle.net/21.15107/rcub_cer_7156
ER  - 

@conference{
author = "Veličić, Zorica and Perendija, Jovana and Milošević, Dragana and Milošević, Milena and Petrović, Vladimir M. and Trajković, Ivana and Vidović, Milka",
year = "2018",
abstract = "Usled povećane proizvodnje mleka u našoj zemlji tokom poslednjih godina dolazi do otvaranja sve većeg broja malih mlekara različitih proizvodnih kapaciteta, a probleme koji se javljaju u vezi sa otpadnim vodama iz proizvodnje i prerade mleka neophodno je rešavati blagovremeno, na efikasan i ekonomičan način. Mlekarske industrije vrše preradu sirovog mleka u proizvode kao što su mleko za svakodnevnu upotrebu, sir, jogurt i kondezovano mleko, korišćenjem procesa hlađenja, pasterizacije i homogenizacije. Sporedni proizvodi koji nastaju u procesu prerade mleka su mlečna masnoća, surutka i njihovi derivati. Indrustrija mleka generiše u proseku 2,5 do 3,0 litra otpadnih voda po jednom litru obrađenog mleka. Tako nastala otpadna voda sadrži velike količine masnoća, kazeina, laktoze, neorganskih soli, deterdženata i dezinfekcionih sredstava za pranje. Pošto vode ove vrste nose sa sobom velika organska opterećenja, njihovo prečiščavanje zahteva niz tehnoloških postupaka. Stepen njihovog prečišćavanja i kvalitet otpadne vode pre ispuštanja u recipijent u većini slučajeva najlakše se prati preko biološke i hemijske potrošnje kiseonika, amonijaka i pH vrednosti.",
publisher = "Udruženje za tehnologiju vode i sanitarno inženjerstvo / Association for water technology and sanitary engineering",
journal = "18. međunarodna konferencija „Vodovodni i kanalizacioni sistemi“ (Water supply and sewage systems), Zbornik radova, 30 maj - 01. jun, Jahorina, Pale",
title = "Promena kvaliteta otpadnih voda mlekarske industrije u zavisnosti od različitih tehnoloških procesa, Change of waste water quality of the dairy industry depending on different technological processes",
pages = "200-202",
url = "https://hdl.handle.net/21.15107/rcub_cer_7156"
}

Veličić, Z., Perendija, J., Milošević, D., Milošević, M., Petrović, V. M., Trajković, I.,& Vidović, M.. (2018). Promena kvaliteta otpadnih voda mlekarske industrije u zavisnosti od različitih tehnoloških procesa. in 18. međunarodna konferencija „Vodovodni i kanalizacioni sistemi“ (Water supply and sewage systems), Zbornik radova, 30 maj - 01. jun, Jahorina, Pale
Udruženje za tehnologiju vode i sanitarno inženjerstvo / Association for water technology and sanitary engineering., 200-202.
https://hdl.handle.net/21.15107/rcub_cer_7156

Veličić Z, Perendija J, Milošević D, Milošević M, Petrović VM, Trajković I, Vidović M. Promena kvaliteta otpadnih voda mlekarske industrije u zavisnosti od različitih tehnoloških procesa. in 18. međunarodna konferencija „Vodovodni i kanalizacioni sistemi“ (Water supply and sewage systems), Zbornik radova, 30 maj - 01. jun, Jahorina, Pale. 2018;:200-202.
https://hdl.handle.net/21.15107/rcub_cer_7156 .

Veličić, Zorica, Perendija, Jovana, Milošević, Dragana, Milošević, Milena, Petrović, Vladimir M., Trajković, Ivana, Vidović, Milka, "Promena kvaliteta otpadnih voda mlekarske industrije u zavisnosti od različitih tehnoloških procesa" in 18. međunarodna konferencija „Vodovodni i kanalizacioni sistemi“ (Water supply and sewage systems), Zbornik radova, 30 maj - 01. jun, Jahorina, Pale (2018):200-202,
https://hdl.handle.net/21.15107/rcub_cer_7156 .

TY  - JOUR
AU  - Ćirić, Miloš
AU  - Nikolic, Natasa
AU  - Krizmanić, Jelena
AU  - Gavrilović, Bojan
AU  - Pantelić, Ana
AU  - Petrović, Vladimir
PY  - 2018
UR  - https://cer.ihtm.bg.ac.rs/handle/123456789/2362
AB  - The development and improvement of the monitoring system of rivers according to the requirements of the Water Framework Directive (WFD) is essential for all European states because assigning a wrong ecological status class (misclassification) to a water body can have significant economic consequences. In order to point out some of the key issues of WFD implementation in Serbia, we conducted a one-year study of the composition and abundance of diatoms in the phytobenthos in two streams, the Lasovacka and Lenovacka, in eastern Serbia. The physicochemical quality elements were also used in the assessment of their ecological status. The diatom community exhibited a higher species richness in the Lasovacka (88 taxa) than in the Lenovacka stream (63 taxa). Such a detailed study enabled us to record some of the rare taxa, e.g. Caloneis budensis in the Lasovacka, which was the first finding of this species in Serbia. The Lasovacka and Lenovacka streams were downgraded to moderate and poor ecological status, respectively, because of the high nitrogen load. Since the monitoring results based on the diatom indices resulted in the assignment of two streams to a good ecological status, the possible reason for the mismatch between the biological and physicochemical quality elements could be due to the lack of analysis of benthic invertebrate fauna or the application of diatom indices that are insufficiently sensitive to the specific environmental pressure. The results of this study show that conducting a comprehensive ecological investigation of rivers within the framework of the WFD in Serbia is urgently needed.
PB  - University of Belgrade, University of Novi Sad
T2  - Archives of Biological Sciences
T1  - Diatom diversity and ecological status of the Lasovacka and Lenovacka streams near Zajecar: consideration of WFD implementation in Serbia
VL  - 70
IS  - 4
SP  - 691
EP  - 698
DO  - 10.2298/ABS180412032C
ER  - 

@article{
author = "Ćirić, Miloš and Nikolic, Natasa and Krizmanić, Jelena and Gavrilović, Bojan and Pantelić, Ana and Petrović, Vladimir",
year = "2018",
abstract = "The development and improvement of the monitoring system of rivers according to the requirements of the Water Framework Directive (WFD) is essential for all European states because assigning a wrong ecological status class (misclassification) to a water body can have significant economic consequences. In order to point out some of the key issues of WFD implementation in Serbia, we conducted a one-year study of the composition and abundance of diatoms in the phytobenthos in two streams, the Lasovacka and Lenovacka, in eastern Serbia. The physicochemical quality elements were also used in the assessment of their ecological status. The diatom community exhibited a higher species richness in the Lasovacka (88 taxa) than in the Lenovacka stream (63 taxa). Such a detailed study enabled us to record some of the rare taxa, e.g. Caloneis budensis in the Lasovacka, which was the first finding of this species in Serbia. The Lasovacka and Lenovacka streams were downgraded to moderate and poor ecological status, respectively, because of the high nitrogen load. Since the monitoring results based on the diatom indices resulted in the assignment of two streams to a good ecological status, the possible reason for the mismatch between the biological and physicochemical quality elements could be due to the lack of analysis of benthic invertebrate fauna or the application of diatom indices that are insufficiently sensitive to the specific environmental pressure. The results of this study show that conducting a comprehensive ecological investigation of rivers within the framework of the WFD in Serbia is urgently needed.",
publisher = "University of Belgrade, University of Novi Sad",
journal = "Archives of Biological Sciences",
title = "Diatom diversity and ecological status of the Lasovacka and Lenovacka streams near Zajecar: consideration of WFD implementation in Serbia",
volume = "70",
number = "4",
pages = "691-698",
doi = "10.2298/ABS180412032C"
}

Ćirić, M., Nikolic, N., Krizmanić, J., Gavrilović, B., Pantelić, A.,& Petrović, V.. (2018). Diatom diversity and ecological status of the Lasovacka and Lenovacka streams near Zajecar: consideration of WFD implementation in Serbia. in Archives of Biological Sciences
University of Belgrade, University of Novi Sad., 70(4), 691-698.
https://doi.org/10.2298/ABS180412032C

Ćirić M, Nikolic N, Krizmanić J, Gavrilović B, Pantelić A, Petrović V. Diatom diversity and ecological status of the Lasovacka and Lenovacka streams near Zajecar: consideration of WFD implementation in Serbia. in Archives of Biological Sciences. 2018;70(4):691-698.
doi:10.2298/ABS180412032C .

Ćirić, Miloš, Nikolic, Natasa, Krizmanić, Jelena, Gavrilović, Bojan, Pantelić, Ana, Petrović, Vladimir, "Diatom diversity and ecological status of the Lasovacka and Lenovacka streams near Zajecar: consideration of WFD implementation in Serbia" in Archives of Biological Sciences, 70, no. 4 (2018):691-698,
https://doi.org/10.2298/ABS180412032C . .

TY  - CONF
AU  - Rogan, S.
AU  - Petrović, Vladimir
AU  - Carević, I.
AU  - Sentić, Milica
PY  - 2018
UR  - https://cer.ihtm.bg.ac.rs/handle/123456789/2400
AB  - The explored area of Banat, located in NE Serbia, with its geological and geothermal characteristics, represents an area with extraordinary ecological potential. The geological structure of Banat is represented by various complexes of Neogene and Quaternary deposits. The Neogene sediments are mostly composed of sandstone, shale, marlstone, sand and gravel. Mesozoic igneous complex is represented by dacites, andesites and basalts. During Quaternary a relatively thick succession of genetically different types of sediments was deposited. Pleistocene and Holocene aeolian sand and loess and fluvial sandy-clayey alevrites, clays, sands and gravel cover the large area. Thickness and lithological composition of crust and lithosphere, as well as character, types and age of tectonic movements and magmatism decisively influence the content of radioactive elements (uranium, thorium and potassium) in the rocks. Nevertheless, the geothermal characteristics of a particular area are influenced in a significant extent by seismicity and hydrogeological properties. The small thickness of the crust and lithosphere, as a result of various geodynamic movements, during the lower and middle Miocene, classify the Pannonian Basin, and therefore the Banat area, among the most promising geothermal areas in Europe. The favorable geothermal characteristics of Banat also show high average values of geothermal gradient and terrestrial heat flux.
PB  - International Multidisciplinary Scientific Geoconference
C3  - International Multidisciplinary Scientific GeoConference Surveying Geology and Mining Ecology Manage
T1  - Ekological aspect of the geothermal potentials of ne Serbia
VL  - 18
IS  - 5.1
SP  - 297
EP  - 304
DO  - 10.5593/sgem2018/5.1/S20.039
ER  - 

@conference{
author = "Rogan, S. and Petrović, Vladimir and Carević, I. and Sentić, Milica",
year = "2018",
abstract = "The explored area of Banat, located in NE Serbia, with its geological and geothermal characteristics, represents an area with extraordinary ecological potential. The geological structure of Banat is represented by various complexes of Neogene and Quaternary deposits. The Neogene sediments are mostly composed of sandstone, shale, marlstone, sand and gravel. Mesozoic igneous complex is represented by dacites, andesites and basalts. During Quaternary a relatively thick succession of genetically different types of sediments was deposited. Pleistocene and Holocene aeolian sand and loess and fluvial sandy-clayey alevrites, clays, sands and gravel cover the large area. Thickness and lithological composition of crust and lithosphere, as well as character, types and age of tectonic movements and magmatism decisively influence the content of radioactive elements (uranium, thorium and potassium) in the rocks. Nevertheless, the geothermal characteristics of a particular area are influenced in a significant extent by seismicity and hydrogeological properties. The small thickness of the crust and lithosphere, as a result of various geodynamic movements, during the lower and middle Miocene, classify the Pannonian Basin, and therefore the Banat area, among the most promising geothermal areas in Europe. The favorable geothermal characteristics of Banat also show high average values of geothermal gradient and terrestrial heat flux.",
publisher = "International Multidisciplinary Scientific Geoconference",
journal = "International Multidisciplinary Scientific GeoConference Surveying Geology and Mining Ecology Manage",
title = "Ekological aspect of the geothermal potentials of ne Serbia",
volume = "18",
number = "5.1",
pages = "297-304",
doi = "10.5593/sgem2018/5.1/S20.039"
}

Rogan, S., Petrović, V., Carević, I.,& Sentić, M.. (2018). Ekological aspect of the geothermal potentials of ne Serbia. in International Multidisciplinary Scientific GeoConference Surveying Geology and Mining Ecology Manage
International Multidisciplinary Scientific Geoconference., 18(5.1), 297-304.
https://doi.org/10.5593/sgem2018/5.1/S20.039

Rogan S, Petrović V, Carević I, Sentić M. Ekological aspect of the geothermal potentials of ne Serbia. in International Multidisciplinary Scientific GeoConference Surveying Geology and Mining Ecology Manage. 2018;18(5.1):297-304.
doi:10.5593/sgem2018/5.1/S20.039 .

Rogan, S., Petrović, Vladimir, Carević, I., Sentić, Milica, "Ekological aspect of the geothermal potentials of ne Serbia" in International Multidisciplinary Scientific GeoConference Surveying Geology and Mining Ecology Manage, 18, no. 5.1 (2018):297-304,
https://doi.org/10.5593/sgem2018/5.1/S20.039 . .

TY  - CONF
AU  - Rogan, S. S.
AU  - Gordanic, V.B.
AU  - Vidović, Milka
AU  - Trajković, Ivana
AU  - Petrović, Vladimir
PY  - 2017
UR  - https://cer.ihtm.bg.ac.rs/handle/123456789/2212
AB  - A source of thermo-mineral water of Vranjska spa is of great importance for environmental protection of rural settlements. Wealthy mineral water composition and the temperature of 93°C are very suitable for the spa tourism development. Capacity of the water source allows appications in industry as well as in food production. Geographical position, developed road network, vicinity to the highway and consumers attainability allow economic development of Vranje region, to whom population from other regions gravitates. The location of the borehole for water exploitation is in the center of Vranjska spa, consisted of tertiary sediments of Vranjska basin. The presence of volcano-sedimentary rocks and deep rift structures indicate a potential perspective of the area as a geothermal energy source. Although the potential of Vranjska spa is still insufficiently exploited in this asspect due to the fact that the resources of fossil fuel are being rapidly depleted, this situation is going be changed in near future and therefore is the subject of our research.
PB  - International Multidisciplinary Scientific Geoconference
C3  - International Multidisciplinary Scientific GeoConference Surveying Geology and Mining Ecology Manage
T1  - A thermal energy of vranjska spa as the economy potential
VL  - 17
IS  - 52
SP  - 27
EP  - 32
DO  - 10.5593/sgem2017/52/S20.004
ER  - 

@conference{
author = "Rogan, S. S. and Gordanic, V.B. and Vidović, Milka and Trajković, Ivana and Petrović, Vladimir",
year = "2017",
abstract = "A source of thermo-mineral water of Vranjska spa is of great importance for environmental protection of rural settlements. Wealthy mineral water composition and the temperature of 93°C are very suitable for the spa tourism development. Capacity of the water source allows appications in industry as well as in food production. Geographical position, developed road network, vicinity to the highway and consumers attainability allow economic development of Vranje region, to whom population from other regions gravitates. The location of the borehole for water exploitation is in the center of Vranjska spa, consisted of tertiary sediments of Vranjska basin. The presence of volcano-sedimentary rocks and deep rift structures indicate a potential perspective of the area as a geothermal energy source. Although the potential of Vranjska spa is still insufficiently exploited in this asspect due to the fact that the resources of fossil fuel are being rapidly depleted, this situation is going be changed in near future and therefore is the subject of our research.",
publisher = "International Multidisciplinary Scientific Geoconference",
journal = "International Multidisciplinary Scientific GeoConference Surveying Geology and Mining Ecology Manage",
title = "A thermal energy of vranjska spa as the economy potential",
volume = "17",
number = "52",
pages = "27-32",
doi = "10.5593/sgem2017/52/S20.004"
}

Rogan, S. S., Gordanic, V.B., Vidović, M., Trajković, I.,& Petrović, V.. (2017). A thermal energy of vranjska spa as the economy potential. in International Multidisciplinary Scientific GeoConference Surveying Geology and Mining Ecology Manage
International Multidisciplinary Scientific Geoconference., 17(52), 27-32.
https://doi.org/10.5593/sgem2017/52/S20.004

Rogan SS, Gordanic V, Vidović M, Trajković I, Petrović V. A thermal energy of vranjska spa as the economy potential. in International Multidisciplinary Scientific GeoConference Surveying Geology and Mining Ecology Manage. 2017;17(52):27-32.
doi:10.5593/sgem2017/52/S20.004 .

Rogan, S. S., Gordanic, V.B., Vidović, Milka, Trajković, Ivana, Petrović, Vladimir, "A thermal energy of vranjska spa as the economy potential" in International Multidisciplinary Scientific GeoConference Surveying Geology and Mining Ecology Manage, 17, no. 52 (2017):27-32,
https://doi.org/10.5593/sgem2017/52/S20.004 . .

TY  - JOUR
AU  - Rogan, Saša
AU  - Vidović, Milka
AU  - Gordanić, Vojin
AU  - Trajković, Ivana
AU  - Petrović, Vladimir
PY  - 2017
UR  - https://utvsi.com/wp-content/uploads/2021/06/s-rogan-1-2017-min.pdf
UR  - https://cer.ihtm.bg.ac.rs/handle/123456789/7029
AB  - Na osnovu rezultata geoloških-geofizičkih istraživanja i strukturnih bušotina izdvojeno je perspektivno područje, sa aspekta korišćenja geotermalne energije, od značaja za razvoj turizma, poljoprivrednih objekata i ruralnih naselja područja Vojvodine. Istražni prostor obuhvata južni obod Panonske nizije. Mala debljina zemljine kore-litosfere svrstava Panonski basen, odnosno područje Vojvodine, među najperspektivnija geotermalna područja u Evropi. Imajući u vidu smanjenje rezervnih fosilnih goriva i uticaj gasova na globalno zagrevanje od značaja je korišćenje obnovljivih izvora - geotermalne energije. 
Među glavnim faktorima koji utiču na zvaničnu procenu potencijala za korišćenje geotermalne energije su niske, konkurentne cene fosilnih goriva, neodgovarajuća zakonska regulativa kao i nedostatak finansija.
AB  - Based on the results of geological-geophysical surveys and structural drillings, the promising area was allocated, in terms of geothermal energy, which is important for the development of tourism, industrial and agricultural facilities in rural villages in Vojvodina. The exploration area includes the Southern edge of the Pannonian Basin. Small thickness of the earth's crust-lithosphere places the Pannonian basin, among the most promising geothermal areas in Europe. The use of renewable energy sources - geothermal energy is of the importantance, regarding to the reduction in reserve of fossil fuels and the impact of emissions on the global warming.
Among the main factors which are affecting the formal assessment of the potential for geothermal energy are low competitive prices of fossil fuels, inadequate legislation and a lack of finance.
PB  - Udruženje za tehnologiju vode i sanitarno inženjerstvo (Association for water technology and sanitary engineering)
T2  - Voda i sanitarna tehnika
T1  - Perspektive geotermalne energije u regionu Vojvodine sa aspekta životne sredine
T1  - Perspectives of geothermal energy in Vojvodina region with the environmental aspects
VL  - XLVI
IS  - 1
SP  - 35
EP  - 44
UR  - https://hdl.handle.net/21.15107/rcub_cer_7029
ER  - 

@article{
author = "Rogan, Saša and Vidović, Milka and Gordanić, Vojin and Trajković, Ivana and Petrović, Vladimir",
year = "2017",
abstract = "Na osnovu rezultata geoloških-geofizičkih istraživanja i strukturnih bušotina izdvojeno je perspektivno područje, sa aspekta korišćenja geotermalne energije, od značaja za razvoj turizma, poljoprivrednih objekata i ruralnih naselja područja Vojvodine. Istražni prostor obuhvata južni obod Panonske nizije. Mala debljina zemljine kore-litosfere svrstava Panonski basen, odnosno područje Vojvodine, među najperspektivnija geotermalna područja u Evropi. Imajući u vidu smanjenje rezervnih fosilnih goriva i uticaj gasova na globalno zagrevanje od značaja je korišćenje obnovljivih izvora - geotermalne energije. 
Među glavnim faktorima koji utiču na zvaničnu procenu potencijala za korišćenje geotermalne energije su niske, konkurentne cene fosilnih goriva, neodgovarajuća zakonska regulativa kao i nedostatak finansija., Based on the results of geological-geophysical surveys and structural drillings, the promising area was allocated, in terms of geothermal energy, which is important for the development of tourism, industrial and agricultural facilities in rural villages in Vojvodina. The exploration area includes the Southern edge of the Pannonian Basin. Small thickness of the earth's crust-lithosphere places the Pannonian basin, among the most promising geothermal areas in Europe. The use of renewable energy sources - geothermal energy is of the importantance, regarding to the reduction in reserve of fossil fuels and the impact of emissions on the global warming.
Among the main factors which are affecting the formal assessment of the potential for geothermal energy are low competitive prices of fossil fuels, inadequate legislation and a lack of finance.",
publisher = "Udruženje za tehnologiju vode i sanitarno inženjerstvo (Association for water technology and sanitary engineering)",
journal = "Voda i sanitarna tehnika",
title = "Perspektive geotermalne energije u regionu Vojvodine sa aspekta životne sredine, Perspectives of geothermal energy in Vojvodina region with the environmental aspects",
volume = "XLVI",
number = "1",
pages = "35-44",
url = "https://hdl.handle.net/21.15107/rcub_cer_7029"
}

Rogan, S., Vidović, M., Gordanić, V., Trajković, I.,& Petrović, V.. (2017). Perspektive geotermalne energije u regionu Vojvodine sa aspekta životne sredine. in Voda i sanitarna tehnika
Udruženje za tehnologiju vode i sanitarno inženjerstvo (Association for water technology and sanitary engineering)., XLVI(1), 35-44.
https://hdl.handle.net/21.15107/rcub_cer_7029

Rogan S, Vidović M, Gordanić V, Trajković I, Petrović V. Perspektive geotermalne energije u regionu Vojvodine sa aspekta životne sredine. in Voda i sanitarna tehnika. 2017;XLVI(1):35-44.
https://hdl.handle.net/21.15107/rcub_cer_7029 .

Rogan, Saša, Vidović, Milka, Gordanić, Vojin, Trajković, Ivana, Petrović, Vladimir, "Perspektive geotermalne energije u regionu Vojvodine sa aspekta životne sredine" in Voda i sanitarna tehnika, XLVI, no. 1 (2017):35-44,
https://hdl.handle.net/21.15107/rcub_cer_7029 .

TY  - JOUR
AU  - Borisov, Mirko
AU  - Petrović, Vladimir M.
PY  - 2017
UR  - http://www.suggsbih.ba/GG.htm
UR  - https://cer.ihtm.bg.ac.rs/handle/123456789/3956
AB  - Technological trends in the field of
cartography and GIS require a different
concept in the production of maps from classic
cartographic publishing. The paper describes
the technological procedure for the creating of
a topographic map at scale of 1:50 000 in the
geodata environment and based on it a
cartographic-reproduction preparation for
printing. At the beginning of the work, the
criteria are analyzed for choosing the basic
scale as initial (fundamental) scale in the
system of topographic maps. After that,
technical and technological solutions are
described, from the modeling of map data to
creating of the database. Also, procedures of
cartographic reproduction preparation and
printing of topographic maps are described. In
the practical part of the work tools and
softwares were used: ArcGIS, MicroStation
and PS/M.
AB  - Tehnološki trendovi na polju kartografije i
GIS, zahtijevaju drugačiji koncept u produkciji
karata od klasičnog kartografskog izdavaštva.
U radu se opisuje tehnološki postupak izrade
topografske karte razmjere 1:50 000 u
okruženju geobaze podataka i na osnovu nje
kartografsko-reprodukcijska priprema za
štampu. Na početku rada, analiziraju se
kriterijumi izbora osnovne razmjere kao
početne (fundamentalne) razmjere u sistemu
topografskih karata. Nakon toga, opisuju se
tehničko-tehnološka rješenja od modelovanja
kartografskih podataka do formiranja baze.
Takođe, opisuju se postupci kartografskoreprodukcijske
pripreme i štampa topografskih
karata. U praktičnom dijelu rada korišćeni su
alati i softverska okruženja: ArcGIS,
MicroStation i PS/M.
PB  - Bosnia and Herzegovina : Union of Associations of Geodetic Professionals in Bosnia and Herzegovina
T2  - Geodetski Glasnik
T1  - Production of topographic map at scale 1:50000 in the environment of geodatabase
T1  - Produkcija topografske karte razmjere 1:50 000 u okruženju geobaze podataka
VL  - 51
IS  - 48
SP  - 89
EP  - 102
UR  - https://hdl.handle.net/21.15107/rcub_cer_3956
ER  - 

@article{
author = "Borisov, Mirko and Petrović, Vladimir M.",
year = "2017",
abstract = "Technological trends in the field of
cartography and GIS require a different
concept in the production of maps from classic
cartographic publishing. The paper describes
the technological procedure for the creating of
a topographic map at scale of 1:50 000 in the
geodata environment and based on it a
cartographic-reproduction preparation for
printing. At the beginning of the work, the
criteria are analyzed for choosing the basic
scale as initial (fundamental) scale in the
system of topographic maps. After that,
technical and technological solutions are
described, from the modeling of map data to
creating of the database. Also, procedures of
cartographic reproduction preparation and
printing of topographic maps are described. In
the practical part of the work tools and
softwares were used: ArcGIS, MicroStation
and PS/M., Tehnološki trendovi na polju kartografije i
GIS, zahtijevaju drugačiji koncept u produkciji
karata od klasičnog kartografskog izdavaštva.
U radu se opisuje tehnološki postupak izrade
topografske karte razmjere 1:50 000 u
okruženju geobaze podataka i na osnovu nje
kartografsko-reprodukcijska priprema za
štampu. Na početku rada, analiziraju se
kriterijumi izbora osnovne razmjere kao
početne (fundamentalne) razmjere u sistemu
topografskih karata. Nakon toga, opisuju se
tehničko-tehnološka rješenja od modelovanja
kartografskih podataka do formiranja baze.
Takođe, opisuju se postupci kartografskoreprodukcijske
pripreme i štampa topografskih
karata. U praktičnom dijelu rada korišćeni su
alati i softverska okruženja: ArcGIS,
MicroStation i PS/M.",
publisher = "Bosnia and Herzegovina : Union of Associations of Geodetic Professionals in Bosnia and Herzegovina",
journal = "Geodetski Glasnik",
title = "Production of topographic map at scale 1:50000 in the environment of geodatabase, Produkcija topografske karte razmjere 1:50 000 u okruženju geobaze podataka",
volume = "51",
number = "48",
pages = "89-102",
url = "https://hdl.handle.net/21.15107/rcub_cer_3956"
}

Borisov, M.,& Petrović, V. M.. (2017). Production of topographic map at scale 1:50000 in the environment of geodatabase. in Geodetski Glasnik
Bosnia and Herzegovina : Union of Associations of Geodetic Professionals in Bosnia and Herzegovina., 51(48), 89-102.
https://hdl.handle.net/21.15107/rcub_cer_3956

Borisov M, Petrović VM. Production of topographic map at scale 1:50000 in the environment of geodatabase. in Geodetski Glasnik. 2017;51(48):89-102.
https://hdl.handle.net/21.15107/rcub_cer_3956 .

Borisov, Mirko, Petrović, Vladimir M., "Production of topographic map at scale 1:50000 in the environment of geodatabase" in Geodetski Glasnik, 51, no. 48 (2017):89-102,
https://hdl.handle.net/21.15107/rcub_cer_3956 .