TY  - JOUR
AU  - Karastojković, Zoran
AU  - Stojiljković, Dragan
AU  - Polić, Suzana R.
PY  - 2022
UR  - https://cer.ihtm.bg.ac.rs/handle/123456789/5930
AB  - Repair of any unicate artefact always requires the challenge and however demands for high level of knowledge & experience in this field, at the same level conservation works. Those demands are regarding not only on visual appearance, it is intended to stain unchainched other properties, even to question of strength, either it is an artistic piece, also the possibility of lowering the corrosion resistance, after the repair works have done. Here in details are analysed possible solutions for repairing of one broken arm when an unicate lamp unintentionaly is damaged. The used bulk material of the lamp is not available for using a kind of welding or soldering procedures, firstly that those methods will markably change the surface properties of the repaired zone. So, the repairing is provided by combining two methods: reinforcing with semi-hard aluminum wire and two component glue.
AB  - Reparacija nekog unikatnog dela uvek predstavlja izazov i zahteva puno stručnosti i umeća konzervacije. Zahtevi se odnose na vizuelni izgled, koji što više treba da ostane neizmenjen, pa do pitanja čvrstoće kao i mogućeg odvijanja korozije nakon izvođenja svih planiranih reparaturnih radova. Ovde se analiziraju mogući postupci reparacije jedne polomljene ruke na unikatnoj stonoj lampi i detaljno je opisano izvođenje reparacije kombinovanjem armiranja aluminijumskom žicom i dvokomponentnim lepkom.
PB  - Beograd : Inženjersko društvo za koroziju
T2  - Zaštita Materijala
T1  - Choosing the procedure for repair of damaged arm at an unicate desk lamp
T1  - Izbor postupka reparacije polomljene ruke jedne unikatne stolne lampe
VL  - 63
IS  - 4
SP  - 381
EP  - 385
DO  - 10.5937/zasmat2204381K
ER  - 

@article{
author = "Karastojković, Zoran and Stojiljković, Dragan and Polić, Suzana R.",
year = "2022",
abstract = "Repair of any unicate artefact always requires the challenge and however demands for high level of knowledge & experience in this field, at the same level conservation works. Those demands are regarding not only on visual appearance, it is intended to stain unchainched other properties, even to question of strength, either it is an artistic piece, also the possibility of lowering the corrosion resistance, after the repair works have done. Here in details are analysed possible solutions for repairing of one broken arm when an unicate lamp unintentionaly is damaged. The used bulk material of the lamp is not available for using a kind of welding or soldering procedures, firstly that those methods will markably change the surface properties of the repaired zone. So, the repairing is provided by combining two methods: reinforcing with semi-hard aluminum wire and two component glue., Reparacija nekog unikatnog dela uvek predstavlja izazov i zahteva puno stručnosti i umeća konzervacije. Zahtevi se odnose na vizuelni izgled, koji što više treba da ostane neizmenjen, pa do pitanja čvrstoće kao i mogućeg odvijanja korozije nakon izvođenja svih planiranih reparaturnih radova. Ovde se analiziraju mogući postupci reparacije jedne polomljene ruke na unikatnoj stonoj lampi i detaljno je opisano izvođenje reparacije kombinovanjem armiranja aluminijumskom žicom i dvokomponentnim lepkom.",
publisher = "Beograd : Inženjersko društvo za koroziju",
journal = "Zaštita Materijala",
title = "Choosing the procedure for repair of damaged arm at an unicate desk lamp, Izbor postupka reparacije polomljene ruke jedne unikatne stolne lampe",
volume = "63",
number = "4",
pages = "381-385",
doi = "10.5937/zasmat2204381K"
}

Karastojković, Z., Stojiljković, D.,& Polić, S. R.. (2022). Choosing the procedure for repair of damaged arm at an unicate desk lamp. in Zaštita Materijala
Beograd : Inženjersko društvo za koroziju., 63(4), 381-385.
https://doi.org/10.5937/zasmat2204381K

Karastojković Z, Stojiljković D, Polić SR. Choosing the procedure for repair of damaged arm at an unicate desk lamp. in Zaštita Materijala. 2022;63(4):381-385.
doi:10.5937/zasmat2204381K .

Karastojković, Zoran, Stojiljković, Dragan, Polić, Suzana R., "Choosing the procedure for repair of damaged arm at an unicate desk lamp" in Zaštita Materijala, 63, no. 4 (2022):381-385,
https://doi.org/10.5937/zasmat2204381K . .

TY  - CONF
AU  - Srećković, Milesa
AU  - Karastojković, Zoran
AU  - Ivanović, Nenad
AU  - Pantelić, Slađana
AU  - Polić, Suzana R.
AU  - Ostojić, Stanko
AU  - Kovačević, Aleksander
PY  - 2019
UR  - https://www.izdanja.smeits.rs/index.php/mkoiee/article/view/5932
UR  - https://cer.ihtm.bg.ac.rs/handle/123456789/6390
AB  - Mnogobrojni metodi transformacije energije, koji se danas koriste praktično u mass media i istraživanjima u raznim savremenim disciplinama zaslužuju analize sa nekoliko aspekata. Jedan od aspekata praktične prirode je poboljšanje karakteristika konstruisanih /ostvarenih senzora i komponenata u praksi, a drugi pitanje transformacije energije i filozofski posmatranog ,,pozitivnog ili negativnog pravca’’. U radu se analiziraju odabrani problemi i problematike, sa teorijske i praktične tačke gledišta, potkrepljene i eksperimentalnim pristupom.
AB  - Versatile methods of energy transformation, among which some of them currently are used even in mass media and in researches at different contemporary disciplines, deserve further analyzing from few aspects. One of the practical approaches is improving the characteristics of designed sensors or components which are present in praxis, while the other is the question of transforming of energy, as some would to say ''from the philosophical view as positive or negative direction“. In this paper are analyzing the chosen problems from the theoretical and practical view points.
PB  - Beograd: Savez mašinskih i elektrotehičkih inženjera i tehničara Srbije (SMEITS) = Belgrade:Union of Mechanical and Electrical Engineers and Technicians of Serbia
C3  - Proceedings - 7th International Conference on Renewable Electrical Power Sources, October 17-18. 2019, Belgrade / Zbornik Međunarodne konferencije o obnovljivim izvorima električne energije – MKOIEE
T1  - Izabrani problemi današnjice u oblasti koherentne optike, fotofizike i interakcije sa elionskim zračenjem
T1  - Chosen contemporary problems in fields of coherent optics, photophysics and interactions with elion radiation
VL  - 7
IS  - 1
SP  - 83
EP  - 99
UR  - https://hdl.handle.net/21.15107/rcub_cer_6390
ER  - 

@conference{
author = "Srećković, Milesa and Karastojković, Zoran and Ivanović, Nenad and Pantelić, Slađana and Polić, Suzana R. and Ostojić, Stanko and Kovačević, Aleksander",
year = "2019",
abstract = "Mnogobrojni metodi transformacije energije, koji se danas koriste praktično u mass media i istraživanjima u raznim savremenim disciplinama zaslužuju analize sa nekoliko aspekata. Jedan od aspekata praktične prirode je poboljšanje karakteristika konstruisanih /ostvarenih senzora i komponenata u praksi, a drugi pitanje transformacije energije i filozofski posmatranog ,,pozitivnog ili negativnog pravca’’. U radu se analiziraju odabrani problemi i problematike, sa teorijske i praktične tačke gledišta, potkrepljene i eksperimentalnim pristupom., Versatile methods of energy transformation, among which some of them currently are used even in mass media and in researches at different contemporary disciplines, deserve further analyzing from few aspects. One of the practical approaches is improving the characteristics of designed sensors or components which are present in praxis, while the other is the question of transforming of energy, as some would to say ''from the philosophical view as positive or negative direction“. In this paper are analyzing the chosen problems from the theoretical and practical view points.",
publisher = "Beograd: Savez mašinskih i elektrotehičkih inženjera i tehničara Srbije (SMEITS) = Belgrade:Union of Mechanical and Electrical Engineers and Technicians of Serbia",
journal = "Proceedings - 7th International Conference on Renewable Electrical Power Sources, October 17-18. 2019, Belgrade / Zbornik Međunarodne konferencije o obnovljivim izvorima električne energije – MKOIEE",
title = "Izabrani problemi današnjice u oblasti koherentne optike, fotofizike i interakcije sa elionskim zračenjem, Chosen contemporary problems in fields of coherent optics, photophysics and interactions with elion radiation",
volume = "7",
number = "1",
pages = "83-99",
url = "https://hdl.handle.net/21.15107/rcub_cer_6390"
}

Srećković, M., Karastojković, Z., Ivanović, N., Pantelić, S., Polić, S. R., Ostojić, S.,& Kovačević, A.. (2019). Izabrani problemi današnjice u oblasti koherentne optike, fotofizike i interakcije sa elionskim zračenjem. in Proceedings - 7th International Conference on Renewable Electrical Power Sources, October 17-18. 2019, Belgrade / Zbornik Međunarodne konferencije o obnovljivim izvorima električne energije – MKOIEE
Beograd: Savez mašinskih i elektrotehičkih inženjera i tehničara Srbije (SMEITS) = Belgrade:Union of Mechanical and Electrical Engineers and Technicians of Serbia., 7(1), 83-99.
https://hdl.handle.net/21.15107/rcub_cer_6390

Srećković M, Karastojković Z, Ivanović N, Pantelić S, Polić SR, Ostojić S, Kovačević A. Izabrani problemi današnjice u oblasti koherentne optike, fotofizike i interakcije sa elionskim zračenjem. in Proceedings - 7th International Conference on Renewable Electrical Power Sources, October 17-18. 2019, Belgrade / Zbornik Međunarodne konferencije o obnovljivim izvorima električne energije – MKOIEE. 2019;7(1):83-99.
https://hdl.handle.net/21.15107/rcub_cer_6390 .

Srećković, Milesa, Karastojković, Zoran, Ivanović, Nenad, Pantelić, Slađana, Polić, Suzana R., Ostojić, Stanko, Kovačević, Aleksander, "Izabrani problemi današnjice u oblasti koherentne optike, fotofizike i interakcije sa elionskim zračenjem" in Proceedings - 7th International Conference on Renewable Electrical Power Sources, October 17-18. 2019, Belgrade / Zbornik Međunarodne konferencije o obnovljivim izvorima električne energije – MKOIEE, 7, no. 1 (2019):83-99,
https://hdl.handle.net/21.15107/rcub_cer_6390 .

TY  - CONF
AU  - Srećković, Milesa
AU  - Polić, Suzana R.
AU  - Stević, Zoran
AU  - Kovačević, Aleksander
AU  - Vasić, Ružica
AU  - Karastojković, Zoran
AU  - Borna, Nada
AU  - Milanović, Srđan
AU  - Jevtić, Sanja
PY  - 2017
UR  - https://cer.ihtm.bg.ac.rs/handle/123456789/6452
AB  - U primeni koherentnog zračenja za dijagnostiku i čišćenje materijala od nataloženih slojeva sa objekata od značaja za kulturnu baštinu, koristi se nekoliko tipova lasera od kojih neki imaju po više izlaza. Nd3+:YAG laser (jednog sistema) se koristi na izlazima: 1,06 μm, 532 nm i 355 nm. Izabrani uzorci materijala različite prirode (keramike, papira, plastike, metala) su izlagani dejstvima prva tri izlaza u cilju uklanjanja neželjenih slojeva. Modeli su predstavljali objekte za procese u kojima se skida željeni sloj sa probnog uzorka tipa grafita, hemijske olovke, flomastera i markera. Pri svakom izlaganju, sniman je odgovarajući termovizijski zapis tako da postoji mogućnost provere modelovanja interakcije odabranog snopa sa materijalom i provera temperaturne distribucije putem simulacija analitičkim i numeričkim metodama sa raznim paketima programa (Numerics, Comsol, Zemax, Glad..).
AB  - In the application of coherent radiation for diagnostics and cleaning materials from the contaminated layers from the facilities of relevance to cultural heritage, several types of lasers are used, some of which have several outputs. ND3 +: YAG LASER (one system) is used on the outputs: 1.06 μm, 532 nm and 355 nm. Selected samples of materials of different nature (ceramics, paper, plastic, metals) are exposed to the effects of the first three outputs in order to remove unwanted layers. The models represented objects for processes in which the desired layer from the trial sample type of graphite type, ballpoint pen, flomaster and marker is removed. In each presentation, the corresponding thermal imaging is recorded so that there is a possibility of checking the interaction of the selected beam with materials and checking temperature distribution through simulations of analytical and numerical methods with various packages (Numerics, COMSOL, ZEMAX, HLAD ..).
PB  - Beograd: Centralni Institut za konzervaciju / Belgrade: Central Institute for Conservation
PB  - Sopot: Naučno društvo za razvoj i afirmaciju novih tehnologija / Sopot: Scientific Association for the Development and Promotion of New Technologies
C3  - Zbornik izvoda i izabrabnih radova Prvog nacionalnog naučno-stručnog skupa Multidisciplinarni pristup kulturnoj bastini, savremenim materijalima i tehnologijama, 03. Jun 2017, Beograd
T1  - Termovizijska analiza razvijenih temperatura na različitim tipovima materijala i zavisnost od talasne dužine upadnog laserskog snopa
T1  - Thessmovism analysis of developed temperatures on different types of materials and dependence on the wavelength of the incidental laser beam
VL  - I
SP  - 70
EP  - 83
UR  - https://hdl.handle.net/21.15107/rcub_cer_6452
ER  - 

@conference{
author = "Srećković, Milesa and Polić, Suzana R. and Stević, Zoran and Kovačević, Aleksander and Vasić, Ružica and Karastojković, Zoran and Borna, Nada and Milanović, Srđan and Jevtić, Sanja",
year = "2017",
abstract = "U primeni koherentnog zračenja za dijagnostiku i čišćenje materijala od nataloženih slojeva sa objekata od značaja za kulturnu baštinu, koristi se nekoliko tipova lasera od kojih neki imaju po više izlaza. Nd3+:YAG laser (jednog sistema) se koristi na izlazima: 1,06 μm, 532 nm i 355 nm. Izabrani uzorci materijala različite prirode (keramike, papira, plastike, metala) su izlagani dejstvima prva tri izlaza u cilju uklanjanja neželjenih slojeva. Modeli su predstavljali objekte za procese u kojima se skida željeni sloj sa probnog uzorka tipa grafita, hemijske olovke, flomastera i markera. Pri svakom izlaganju, sniman je odgovarajući termovizijski zapis tako da postoji mogućnost provere modelovanja interakcije odabranog snopa sa materijalom i provera temperaturne distribucije putem simulacija analitičkim i numeričkim metodama sa raznim paketima programa (Numerics, Comsol, Zemax, Glad..)., In the application of coherent radiation for diagnostics and cleaning materials from the contaminated layers from the facilities of relevance to cultural heritage, several types of lasers are used, some of which have several outputs. ND3 +: YAG LASER (one system) is used on the outputs: 1.06 μm, 532 nm and 355 nm. Selected samples of materials of different nature (ceramics, paper, plastic, metals) are exposed to the effects of the first three outputs in order to remove unwanted layers. The models represented objects for processes in which the desired layer from the trial sample type of graphite type, ballpoint pen, flomaster and marker is removed. In each presentation, the corresponding thermal imaging is recorded so that there is a possibility of checking the interaction of the selected beam with materials and checking temperature distribution through simulations of analytical and numerical methods with various packages (Numerics, COMSOL, ZEMAX, HLAD ..).",
publisher = "Beograd: Centralni Institut za konzervaciju / Belgrade: Central Institute for Conservation, Sopot: Naučno društvo za razvoj i afirmaciju novih tehnologija / Sopot: Scientific Association for the Development and Promotion of New Technologies",
journal = "Zbornik izvoda i izabrabnih radova Prvog nacionalnog naučno-stručnog skupa Multidisciplinarni pristup kulturnoj bastini, savremenim materijalima i tehnologijama, 03. Jun 2017, Beograd",
title = "Termovizijska analiza razvijenih temperatura na različitim tipovima materijala i zavisnost od talasne dužine upadnog laserskog snopa, Thessmovism analysis of developed temperatures on different types of materials and dependence on the wavelength of the incidental laser beam",
volume = "I",
pages = "70-83",
url = "https://hdl.handle.net/21.15107/rcub_cer_6452"
}

Srećković, M., Polić, S. R., Stević, Z., Kovačević, A., Vasić, R., Karastojković, Z., Borna, N., Milanović, S.,& Jevtić, S.. (2017). Termovizijska analiza razvijenih temperatura na različitim tipovima materijala i zavisnost od talasne dužine upadnog laserskog snopa. in Zbornik izvoda i izabrabnih radova Prvog nacionalnog naučno-stručnog skupa Multidisciplinarni pristup kulturnoj bastini, savremenim materijalima i tehnologijama, 03. Jun 2017, Beograd
Beograd: Centralni Institut za konzervaciju / Belgrade: Central Institute for Conservation., I, 70-83.
https://hdl.handle.net/21.15107/rcub_cer_6452

Srećković M, Polić SR, Stević Z, Kovačević A, Vasić R, Karastojković Z, Borna N, Milanović S, Jevtić S. Termovizijska analiza razvijenih temperatura na različitim tipovima materijala i zavisnost od talasne dužine upadnog laserskog snopa. in Zbornik izvoda i izabrabnih radova Prvog nacionalnog naučno-stručnog skupa Multidisciplinarni pristup kulturnoj bastini, savremenim materijalima i tehnologijama, 03. Jun 2017, Beograd. 2017;I:70-83.
https://hdl.handle.net/21.15107/rcub_cer_6452 .

Srećković, Milesa, Polić, Suzana R., Stević, Zoran, Kovačević, Aleksander, Vasić, Ružica, Karastojković, Zoran, Borna, Nada, Milanović, Srđan, Jevtić, Sanja, "Termovizijska analiza razvijenih temperatura na različitim tipovima materijala i zavisnost od talasne dužine upadnog laserskog snopa" in Zbornik izvoda i izabrabnih radova Prvog nacionalnog naučno-stručnog skupa Multidisciplinarni pristup kulturnoj bastini, savremenim materijalima i tehnologijama, 03. Jun 2017, Beograd, I (2017):70-83,
https://hdl.handle.net/21.15107/rcub_cer_6452 .

TY  - CONF
AU  - Karastojković, Zoran
AU  - Polić, Suzana R.
AU  - Ilić, Nataša
AU  - Janjušević, Zoran
PY  - 2017
UR  - https://cer.ihtm.bg.ac.rs/handle/123456789/6195
AB  - For investigation of artistic components, generally, there are not many developed and usable testing methods. One of the available method for such investigation is radiographic testing. For useful application of this method the thickness of testing components does not represents a problem, neither the great or small thickness. Here is tested an artefact in the shape of desk lamp. The chemical composition of the body is analysed by using XRF spectrography while the radiographic transparent testing is applied through the whole body of the lamp. 
The body of this desk lamp is produced by casting, using the precise casting method, while other decorative ornaments were shaped by hammering. The fastening of those components is provided by brazing or mechanically. The plastic deformation is designated as method for shaping of thin elements – leaves. The radiographic testing has revealed the existence of indications only at leaves produced by hammering. The indications usually means discontinuities in material homogeneity. Registration of indications and their locations are necessary steps in every further approach for removing such discontinuities. Choosing the repair method always is of a particular problem, however in whole technics, especially in such sensitive artistic components. Every action in repairing or restauration may led to more or less visible traces. Inadequate actions may permanently change the appearance or value of treated artefact.
PB  - Sopot : Scientific Association for Development and Affirmation of New Technologies
C3  - Book of Abstracts of Third International Conference Modern Methods of Testing and Evaluation in Science, NANT 2016
T1  - X-ray transparent testing of thin elements of an artistic part
SP  - 10
UR  - https://hdl.handle.net/21.15107/rcub_cer_6195
ER  - 

@conference{
author = "Karastojković, Zoran and Polić, Suzana R. and Ilić, Nataša and Janjušević, Zoran",
year = "2017",
abstract = "For investigation of artistic components, generally, there are not many developed and usable testing methods. One of the available method for such investigation is radiographic testing. For useful application of this method the thickness of testing components does not represents a problem, neither the great or small thickness. Here is tested an artefact in the shape of desk lamp. The chemical composition of the body is analysed by using XRF spectrography while the radiographic transparent testing is applied through the whole body of the lamp. 
The body of this desk lamp is produced by casting, using the precise casting method, while other decorative ornaments were shaped by hammering. The fastening of those components is provided by brazing or mechanically. The plastic deformation is designated as method for shaping of thin elements – leaves. The radiographic testing has revealed the existence of indications only at leaves produced by hammering. The indications usually means discontinuities in material homogeneity. Registration of indications and their locations are necessary steps in every further approach for removing such discontinuities. Choosing the repair method always is of a particular problem, however in whole technics, especially in such sensitive artistic components. Every action in repairing or restauration may led to more or less visible traces. Inadequate actions may permanently change the appearance or value of treated artefact.",
publisher = "Sopot : Scientific Association for Development and Affirmation of New Technologies",
journal = "Book of Abstracts of Third International Conference Modern Methods of Testing and Evaluation in Science, NANT 2016",
title = "X-ray transparent testing of thin elements of an artistic part",
pages = "10",
url = "https://hdl.handle.net/21.15107/rcub_cer_6195"
}

Karastojković, Z., Polić, S. R., Ilić, N.,& Janjušević, Z.. (2017). X-ray transparent testing of thin elements of an artistic part. in Book of Abstracts of Third International Conference Modern Methods of Testing and Evaluation in Science, NANT 2016
Sopot : Scientific Association for Development and Affirmation of New Technologies., 10.
https://hdl.handle.net/21.15107/rcub_cer_6195

Karastojković Z, Polić SR, Ilić N, Janjušević Z. X-ray transparent testing of thin elements of an artistic part. in Book of Abstracts of Third International Conference Modern Methods of Testing and Evaluation in Science, NANT 2016. 2017;:10.
https://hdl.handle.net/21.15107/rcub_cer_6195 .

Karastojković, Zoran, Polić, Suzana R., Ilić, Nataša, Janjušević, Zoran, "X-ray transparent testing of thin elements of an artistic part" in Book of Abstracts of Third International Conference Modern Methods of Testing and Evaluation in Science, NANT 2016 (2017):10,
https://hdl.handle.net/21.15107/rcub_cer_6195 .