TY  - CHAP
AU  - Nikolić, Nebojša D.
AU  - Krstić, Snežana B.
AU  - Pavlović, L.J.
AU  - Pavlović, Miomir
AU  - Popov, Konstantin I.
PY  - 2008
UR  - https://cer.ihtm.bg.ac.rs/handle/123456789/482
AB  - The papers dealing with the effects of electrodeposition conditions on the decisive characteristics of electrolytic copper powder and their mutual relations are reviewed, and a semiquantitative theory based on them is presented. Also, the method for the estimation of the surface energy of disperse deposit formation based on the estimation of a surface area of deposits at different overpotentials is proposed. Then, the values of the surface energy of disperse deposit formation estimated in this way are used for the correlation of the specific surface of a powder to the electrodeposition conditions. The good agreement between the values of the specific surface of a powder determined in this way and those found in the literature is obtained. The apparent density of a powder as one of the decisive characteristics of metal powders is also correlated to the specific surface, and hence, to the electrodeposition conditions. In this chapter, the size of representative powder particle having the same specific surface as a powder is defined and the shape of the particle size distribution curve is analyzed. The problems concerning the effect of the particle shape and structure on the flowability of electrolytically formed copper powder are also discussed.© 2009 by Nova Science Publishers, Inc. All rights reserved.
PB  - Nova Science Publishers, Inc.
T2  - Electroanalytical Chemistry Research Trends
T1  - The mutual relation of decisive characteristics of electrolytic copper powder and effect of deposition conditions on them
SP  - 185
EP  - 209
UR  - https://hdl.handle.net/21.15107/rcub_cer_482
ER  - 

@inbook{
author = "Nikolić, Nebojša D. and Krstić, Snežana B. and Pavlović, L.J. and Pavlović, Miomir and Popov, Konstantin I.",
year = "2008",
abstract = "The papers dealing with the effects of electrodeposition conditions on the decisive characteristics of electrolytic copper powder and their mutual relations are reviewed, and a semiquantitative theory based on them is presented. Also, the method for the estimation of the surface energy of disperse deposit formation based on the estimation of a surface area of deposits at different overpotentials is proposed. Then, the values of the surface energy of disperse deposit formation estimated in this way are used for the correlation of the specific surface of a powder to the electrodeposition conditions. The good agreement between the values of the specific surface of a powder determined in this way and those found in the literature is obtained. The apparent density of a powder as one of the decisive characteristics of metal powders is also correlated to the specific surface, and hence, to the electrodeposition conditions. In this chapter, the size of representative powder particle having the same specific surface as a powder is defined and the shape of the particle size distribution curve is analyzed. The problems concerning the effect of the particle shape and structure on the flowability of electrolytically formed copper powder are also discussed.© 2009 by Nova Science Publishers, Inc. All rights reserved.",
publisher = "Nova Science Publishers, Inc.",
journal = "Electroanalytical Chemistry Research Trends",
booktitle = "The mutual relation of decisive characteristics of electrolytic copper powder and effect of deposition conditions on them",
pages = "185-209",
url = "https://hdl.handle.net/21.15107/rcub_cer_482"
}

Nikolić, N. D., Krstić, S. B., Pavlović, L.J., Pavlović, M.,& Popov, K. I.. (2008). The mutual relation of decisive characteristics of electrolytic copper powder and effect of deposition conditions on them. in Electroanalytical Chemistry Research Trends
Nova Science Publishers, Inc.., 185-209.
https://hdl.handle.net/21.15107/rcub_cer_482

Nikolić ND, Krstić SB, Pavlović L, Pavlović M, Popov KI. The mutual relation of decisive characteristics of electrolytic copper powder and effect of deposition conditions on them. in Electroanalytical Chemistry Research Trends. 2008;:185-209.
https://hdl.handle.net/21.15107/rcub_cer_482 .

Nikolić, Nebojša D., Krstić, Snežana B., Pavlović, L.J., Pavlović, Miomir, Popov, Konstantin I., "The mutual relation of decisive characteristics of electrolytic copper powder and effect of deposition conditions on them" in Electroanalytical Chemistry Research Trends (2008):185-209,
https://hdl.handle.net/21.15107/rcub_cer_482 .

TY  - JOUR
AU  - Popov, Konstantin I.
AU  - Nikolić, Nebojša D.
AU  - Krstić, Snežana B.
AU  - Pavlović, Miomir
PY  - 2006
UR  - https://cer.ihtm.bg.ac.rs/handle/123456789/255
AB  - A method for the estimation of the size of the representative particle of a copper powder is given. Cross sections of representative particles of flowing and non-flowing powders estimated by this procedure are also presented.
AB  - U radu je dat metod za procenu veličine reprezentativnih čestica bakarnog praha. Predstavljeni su poprečni preseci reprezentativne čestice tečljivog i netečljivog praha dobijeni korišćenjem ovog postupka.
PB  - Serbian Chemical Society
T2  - Journal of the Serbian Chemical Society
T1  - Physical modeling of representative particles of electrodeposited copper powders
T1  - Fizičko modelovanje reprezentativnih čestica elektrohemijski istaloženog bakarnog praha
VL  - 71
IS  - 4
SP  - 397
EP  - 400
DO  - 10.2298/JSC0604397P
ER  - 

@article{
author = "Popov, Konstantin I. and Nikolić, Nebojša D. and Krstić, Snežana B. and Pavlović, Miomir",
year = "2006",
abstract = "A method for the estimation of the size of the representative particle of a copper powder is given. Cross sections of representative particles of flowing and non-flowing powders estimated by this procedure are also presented., U radu je dat metod za procenu veličine reprezentativnih čestica bakarnog praha. Predstavljeni su poprečni preseci reprezentativne čestice tečljivog i netečljivog praha dobijeni korišćenjem ovog postupka.",
publisher = "Serbian Chemical Society",
journal = "Journal of the Serbian Chemical Society",
title = "Physical modeling of representative particles of electrodeposited copper powders, Fizičko modelovanje reprezentativnih čestica elektrohemijski istaloženog bakarnog praha",
volume = "71",
number = "4",
pages = "397-400",
doi = "10.2298/JSC0604397P"
}

Popov, K. I., Nikolić, N. D., Krstić, S. B.,& Pavlović, M.. (2006). Physical modeling of representative particles of electrodeposited copper powders. in Journal of the Serbian Chemical Society
Serbian Chemical Society., 71(4), 397-400.
https://doi.org/10.2298/JSC0604397P

Popov KI, Nikolić ND, Krstić SB, Pavlović M. Physical modeling of representative particles of electrodeposited copper powders. in Journal of the Serbian Chemical Society. 2006;71(4):397-400.
doi:10.2298/JSC0604397P .

Popov, Konstantin I., Nikolić, Nebojša D., Krstić, Snežana B., Pavlović, Miomir, "Physical modeling of representative particles of electrodeposited copper powders" in Journal of the Serbian Chemical Society, 71, no. 4 (2006):397-400,
https://doi.org/10.2298/JSC0604397P . .

TY  - JOUR
AU  - Pavlović, Miomir
AU  - Popov, Konstantin I.
AU  - Krstić, Snežana B.
AU  - Pavlovic, LJ
AU  - Ivanović, Evica
PY  - 2005
UR  - https://cer.ihtm.bg.ac.rs/handle/123456789/176
AB  - The surface structure of powder particles, which allows free flow of copper powder, was examined. It has been shown that a sufficiently dense surface structure which permits free flow will be obtained if apparent density is higher than 2.2 - 2.3 g/cm(3). Such a surface structure can be obtained by reversing current electrodeposition of powder at considerably lower apparent densities of powder due to selective dissolution of subparticles during anodic time of reversing current wave. The surface structure of copper powder particles is discussed and correlated with the lowest apparent density at which the copper powder can still flow.
PB  - Trans Tech Publications Ltd, Durnten-Zurich
T2  - Current Research in Advanced Materials and Processes
T1  - Flowability of electrolytic copper powder
VL  - 494
SP  - 247
EP  - 252
DO  - 10.4028/www.scientific.net/MSF.494.247
ER  - 

@article{
author = "Pavlović, Miomir and Popov, Konstantin I. and Krstić, Snežana B. and Pavlovic, LJ and Ivanović, Evica",
year = "2005",
abstract = "The surface structure of powder particles, which allows free flow of copper powder, was examined. It has been shown that a sufficiently dense surface structure which permits free flow will be obtained if apparent density is higher than 2.2 - 2.3 g/cm(3). Such a surface structure can be obtained by reversing current electrodeposition of powder at considerably lower apparent densities of powder due to selective dissolution of subparticles during anodic time of reversing current wave. The surface structure of copper powder particles is discussed and correlated with the lowest apparent density at which the copper powder can still flow.",
publisher = "Trans Tech Publications Ltd, Durnten-Zurich",
journal = "Current Research in Advanced Materials and Processes",
title = "Flowability of electrolytic copper powder",
volume = "494",
pages = "247-252",
doi = "10.4028/www.scientific.net/MSF.494.247"
}

Pavlović, M., Popov, K. I., Krstić, S. B., Pavlovic, L.,& Ivanović, E.. (2005). Flowability of electrolytic copper powder. in Current Research in Advanced Materials and Processes
Trans Tech Publications Ltd, Durnten-Zurich., 494, 247-252.
https://doi.org/10.4028/www.scientific.net/MSF.494.247

Pavlović M, Popov KI, Krstić SB, Pavlovic L, Ivanović E. Flowability of electrolytic copper powder. in Current Research in Advanced Materials and Processes. 2005;494:247-252.
doi:10.4028/www.scientific.net/MSF.494.247 .

Pavlović, Miomir, Popov, Konstantin I., Krstić, Snežana B., Pavlovic, LJ, Ivanović, Evica, "Flowability of electrolytic copper powder" in Current Research in Advanced Materials and Processes, 494 (2005):247-252,
https://doi.org/10.4028/www.scientific.net/MSF.494.247 . .

TY  - JOUR
AU  - Popov, Konstantin I.
AU  - Krstić, Snežana B.
AU  - Pavlović, Miomir
AU  - Pavlović, Ljubica
AU  - Maksimović, Vesna M.
PY  - 2004
UR  - https://cer.ihtm.bg.ac.rs/handle/123456789/136
AB  - The structure of powder particleswas analysed by considering their cross sections. It was shown that the structure of powder particles of nonsieved flowing powders is sufficiently dense to produce a continuous surface, which does not allow the particles to jam and hence permits the free flow of nonsieved powder. It was also shown that the representative powder particle the elementary cell of which can be presented by a 3D-cross, describes the properties of the powder relative to its flowability well.
AB  - Analizirana je struktura čestica praha razmatranjem njihovog poprečnog preseka Pokazano je da je struktura čestica nesejanog praha koji teče dovoljno gusta da obrazuje kontinualnu površinu, koja ne dozvoljava zaglavljivanje čestica i samim tim omogućava slobodno tečenje nesejanih prahova. Takođe je pokazano da reprezentativna čestica praha, čija se elementarna ćelija može predstaviti 3D-krstom, dobro opisuje osobine praha koje se odnose na tečljivost.
PB  - Serbian Chemical Society
T2  - Journal of the Serbian Chemical Society
T1  - The effect of the particle shape and structure on the flowability of electrolytic copper powder IV: The internal structure of the powder particles
T1  - Uticaj oblika i strukture čestica na tečljivost elektrolitičkog bakarnog praha IV - unutrašnja struktura čestica praha
VL  - 69
IS  - 10
SP  - 817
EP  - 825
DO  - 10.2298/JSC0410817P
ER  - 

@article{
author = "Popov, Konstantin I. and Krstić, Snežana B. and Pavlović, Miomir and Pavlović, Ljubica and Maksimović, Vesna M.",
year = "2004",
abstract = "The structure of powder particleswas analysed by considering their cross sections. It was shown that the structure of powder particles of nonsieved flowing powders is sufficiently dense to produce a continuous surface, which does not allow the particles to jam and hence permits the free flow of nonsieved powder. It was also shown that the representative powder particle the elementary cell of which can be presented by a 3D-cross, describes the properties of the powder relative to its flowability well., Analizirana je struktura čestica praha razmatranjem njihovog poprečnog preseka Pokazano je da je struktura čestica nesejanog praha koji teče dovoljno gusta da obrazuje kontinualnu površinu, koja ne dozvoljava zaglavljivanje čestica i samim tim omogućava slobodno tečenje nesejanih prahova. Takođe je pokazano da reprezentativna čestica praha, čija se elementarna ćelija može predstaviti 3D-krstom, dobro opisuje osobine praha koje se odnose na tečljivost.",
publisher = "Serbian Chemical Society",
journal = "Journal of the Serbian Chemical Society",
title = "The effect of the particle shape and structure on the flowability of electrolytic copper powder IV: The internal structure of the powder particles, Uticaj oblika i strukture čestica na tečljivost elektrolitičkog bakarnog praha IV - unutrašnja struktura čestica praha",
volume = "69",
number = "10",
pages = "817-825",
doi = "10.2298/JSC0410817P"
}

Popov, K. I., Krstić, S. B., Pavlović, M., Pavlović, L.,& Maksimović, V. M.. (2004). The effect of the particle shape and structure on the flowability of electrolytic copper powder IV: The internal structure of the powder particles. in Journal of the Serbian Chemical Society
Serbian Chemical Society., 69(10), 817-825.
https://doi.org/10.2298/JSC0410817P

Popov KI, Krstić SB, Pavlović M, Pavlović L, Maksimović VM. The effect of the particle shape and structure on the flowability of electrolytic copper powder IV: The internal structure of the powder particles. in Journal of the Serbian Chemical Society. 2004;69(10):817-825.
doi:10.2298/JSC0410817P .

Popov, Konstantin I., Krstić, Snežana B., Pavlović, Miomir, Pavlović, Ljubica, Maksimović, Vesna M., "The effect of the particle shape and structure on the flowability of electrolytic copper powder IV: The internal structure of the powder particles" in Journal of the Serbian Chemical Society, 69, no. 10 (2004):817-825,
https://doi.org/10.2298/JSC0410817P . .

TY  - JOUR
AU  - Popov, Konstantin I.
AU  - Krstić, Snežana B.
AU  - Obradović, Milutin Č.
AU  - Pavlović, Miomir
AU  - Pavlović, Ljubica
AU  - Ivanović, Evica
PY  - 2004
UR  - https://cer.ihtm.bg.ac.rs/handle/123456789/149
AB  - The structure of the surface of copper powder particles is discussed and correlated with the lowest apparent density at which copper powder can still flow. It is shown that such structures can be easily obtained in the electrodeposition of powders in reversing current regimes.
AB  - Razmatrana je struktura površine čestica bakarnog praha i korelisana s najmanjom nasipnom masom pri kojoj bakarni prah još uvek može da teče. Pokazano je da se takva struktura može lako dobiti elektrohemijskim taloženjem praha u režimu reversne struje.
PB  - Serbian Chemical Society
T2  - Journal of the Serbian Chemical Society
T1  - The effect of the particle shape and structure on the flowability of electrolytic copper powder, III: A model of the surface of a representative particle of flowing copper powder electrodeposited by reversing current
T1  - Uticaj oblika I strukture čestica na tečljivost elektrolitičkog bakarnog praha III - model površine reprezentativne čestice tečljivog bakarnog praha dobijenog elektohemijskim taloženjem reversnom strujom
VL  - 69
IS  - 1
SP  - 43
EP  - 51
DO  - 10.2298/JSC0401043P
ER  - 

@article{
author = "Popov, Konstantin I. and Krstić, Snežana B. and Obradović, Milutin Č. and Pavlović, Miomir and Pavlović, Ljubica and Ivanović, Evica",
year = "2004",
abstract = "The structure of the surface of copper powder particles is discussed and correlated with the lowest apparent density at which copper powder can still flow. It is shown that such structures can be easily obtained in the electrodeposition of powders in reversing current regimes., Razmatrana je struktura površine čestica bakarnog praha i korelisana s najmanjom nasipnom masom pri kojoj bakarni prah još uvek može da teče. Pokazano je da se takva struktura može lako dobiti elektrohemijskim taloženjem praha u režimu reversne struje.",
publisher = "Serbian Chemical Society",
journal = "Journal of the Serbian Chemical Society",
title = "The effect of the particle shape and structure on the flowability of electrolytic copper powder, III: A model of the surface of a representative particle of flowing copper powder electrodeposited by reversing current, Uticaj oblika I strukture čestica na tečljivost elektrolitičkog bakarnog praha III - model površine reprezentativne čestice tečljivog bakarnog praha dobijenog elektohemijskim taloženjem reversnom strujom",
volume = "69",
number = "1",
pages = "43-51",
doi = "10.2298/JSC0401043P"
}

Popov, K. I., Krstić, S. B., Obradović, M. Č., Pavlović, M., Pavlović, L.,& Ivanović, E.. (2004). The effect of the particle shape and structure on the flowability of electrolytic copper powder, III: A model of the surface of a representative particle of flowing copper powder electrodeposited by reversing current. in Journal of the Serbian Chemical Society
Serbian Chemical Society., 69(1), 43-51.
https://doi.org/10.2298/JSC0401043P

Popov KI, Krstić SB, Obradović MČ, Pavlović M, Pavlović L, Ivanović E. The effect of the particle shape and structure on the flowability of electrolytic copper powder, III: A model of the surface of a representative particle of flowing copper powder electrodeposited by reversing current. in Journal of the Serbian Chemical Society. 2004;69(1):43-51.
doi:10.2298/JSC0401043P .

Popov, Konstantin I., Krstić, Snežana B., Obradović, Milutin Č., Pavlović, Miomir, Pavlović, Ljubica, Ivanović, Evica, "The effect of the particle shape and structure on the flowability of electrolytic copper powder, III: A model of the surface of a representative particle of flowing copper powder electrodeposited by reversing current" in Journal of the Serbian Chemical Society, 69, no. 1 (2004):43-51,
https://doi.org/10.2298/JSC0401043P . .

TY  - JOUR
AU  - Popov, Konstantin I.
AU  - Pavlović, Miomir
AU  - Pavlović, Ljubica
AU  - Ivanović, Evica
AU  - Krstić, Snežana B.
AU  - Obradović, Milutin Č.
PY  - 2003
UR  - https://cer.ihtm.bg.ac.rs/handle/123456789/106
AB  - An analysis of the effects of the shape, surface structure and size distribution of particles on the flow ability of the copper powder was performed. It is shown that the most important property of the particles of a powder, regarding the flow ability of the powder, is the surface structure of the particles.
AB  - Izvedena je analiza uticaja oblika, površinske strukture i raspodele veličina čestica na tečljivost bakarnog praha. Pokazano je da površinska struktura predstavlja najvažnije svojstvo čestice praha u odnosu na njegovu tečljivost.
PB  - Serbian Chemical Society
T2  - Journal of the Serbian Chemical Society
T1  - The effect of the particle shape and structure on the flow ability of electrolytic copper powder II: The experimental verification of the model of the representative powder particle
T1  - Uticaj oblika i strukture čestica na tečljivost elektrolitičkog bakarnog praha II - eksperimentalna potvrda modela reprezentativne čestice praha
VL  - 68
IS  - 10
SP  - 779
EP  - 783
DO  - 10.2298/JSC0310779P
ER  - 

@article{
author = "Popov, Konstantin I. and Pavlović, Miomir and Pavlović, Ljubica and Ivanović, Evica and Krstić, Snežana B. and Obradović, Milutin Č.",
year = "2003",
abstract = "An analysis of the effects of the shape, surface structure and size distribution of particles on the flow ability of the copper powder was performed. It is shown that the most important property of the particles of a powder, regarding the flow ability of the powder, is the surface structure of the particles., Izvedena je analiza uticaja oblika, površinske strukture i raspodele veličina čestica na tečljivost bakarnog praha. Pokazano je da površinska struktura predstavlja najvažnije svojstvo čestice praha u odnosu na njegovu tečljivost.",
publisher = "Serbian Chemical Society",
journal = "Journal of the Serbian Chemical Society",
title = "The effect of the particle shape and structure on the flow ability of electrolytic copper powder II: The experimental verification of the model of the representative powder particle, Uticaj oblika i strukture čestica na tečljivost elektrolitičkog bakarnog praha II - eksperimentalna potvrda modela reprezentativne čestice praha",
volume = "68",
number = "10",
pages = "779-783",
doi = "10.2298/JSC0310779P"
}

Popov, K. I., Pavlović, M., Pavlović, L., Ivanović, E., Krstić, S. B.,& Obradović, M. Č.. (2003). The effect of the particle shape and structure on the flow ability of electrolytic copper powder II: The experimental verification of the model of the representative powder particle. in Journal of the Serbian Chemical Society
Serbian Chemical Society., 68(10), 779-783.
https://doi.org/10.2298/JSC0310779P

Popov KI, Pavlović M, Pavlović L, Ivanović E, Krstić SB, Obradović MČ. The effect of the particle shape and structure on the flow ability of electrolytic copper powder II: The experimental verification of the model of the representative powder particle. in Journal of the Serbian Chemical Society. 2003;68(10):779-783.
doi:10.2298/JSC0310779P .

Popov, Konstantin I., Pavlović, Miomir, Pavlović, Ljubica, Ivanović, Evica, Krstić, Snežana B., Obradović, Milutin Č., "The effect of the particle shape and structure on the flow ability of electrolytic copper powder II: The experimental verification of the model of the representative powder particle" in Journal of the Serbian Chemical Society, 68, no. 10 (2003):779-783,
https://doi.org/10.2298/JSC0310779P . .

TY  - JOUR
AU  - Popov, Konstantin I.
AU  - Krstić, Snežana B.
AU  - Obradović, Milutin Č.
AU  - Pavlović, Miomir
AU  - Pavlović, Ljubica
AU  - Ivanović, Evica
PY  - 2003
UR  - https://cer.ihtm.bg.ac.rs/handle/123456789/110
AB  - One of the most important properties of copper powder is its flow ability which depends on the shape and the structure of the powder particles. A procedure for the determination of a representative powder particle permitting the free flow of copper powder is proposed.
AB  - Jedno od najvažnijih svojstava bakarnog praha je njegova tečljivost, koja zavisi od oblika i strukture čestica praha. Predložen je postupak za određivanje reprezentativne čestice praha koja obezbeđuje slobodno tečenje bakarnog praha.
PB  - Serbian Chemical Society
T2  - Journal of the Serbian Chemical Society
T1  - The effect of the particle shape and structure on the flowability of electrolytic copper powder I: Modeling of a representative powder particle
T1  - Uticaj oblika i strukture čestica na tečljivost elektrolitičkog bakarnog praha I - modelovanje reprezentativne čestice praha
VL  - 68
IS  - 10
SP  - 771
EP  - 778
DO  - 10.2298/JSC0310771P
ER  - 

@article{
author = "Popov, Konstantin I. and Krstić, Snežana B. and Obradović, Milutin Č. and Pavlović, Miomir and Pavlović, Ljubica and Ivanović, Evica",
year = "2003",
abstract = "One of the most important properties of copper powder is its flow ability which depends on the shape and the structure of the powder particles. A procedure for the determination of a representative powder particle permitting the free flow of copper powder is proposed., Jedno od najvažnijih svojstava bakarnog praha je njegova tečljivost, koja zavisi od oblika i strukture čestica praha. Predložen je postupak za određivanje reprezentativne čestice praha koja obezbeđuje slobodno tečenje bakarnog praha.",
publisher = "Serbian Chemical Society",
journal = "Journal of the Serbian Chemical Society",
title = "The effect of the particle shape and structure on the flowability of electrolytic copper powder I: Modeling of a representative powder particle, Uticaj oblika i strukture čestica na tečljivost elektrolitičkog bakarnog praha I - modelovanje reprezentativne čestice praha",
volume = "68",
number = "10",
pages = "771-778",
doi = "10.2298/JSC0310771P"
}

Popov, K. I., Krstić, S. B., Obradović, M. Č., Pavlović, M., Pavlović, L.,& Ivanović, E.. (2003). The effect of the particle shape and structure on the flowability of electrolytic copper powder I: Modeling of a representative powder particle. in Journal of the Serbian Chemical Society
Serbian Chemical Society., 68(10), 771-778.
https://doi.org/10.2298/JSC0310771P

Popov KI, Krstić SB, Obradović MČ, Pavlović M, Pavlović L, Ivanović E. The effect of the particle shape and structure on the flowability of electrolytic copper powder I: Modeling of a representative powder particle. in Journal of the Serbian Chemical Society. 2003;68(10):771-778.
doi:10.2298/JSC0310771P .

Popov, Konstantin I., Krstić, Snežana B., Obradović, Milutin Č., Pavlović, Miomir, Pavlović, Ljubica, Ivanović, Evica, "The effect of the particle shape and structure on the flowability of electrolytic copper powder I: Modeling of a representative powder particle" in Journal of the Serbian Chemical Society, 68, no. 10 (2003):771-778,
https://doi.org/10.2298/JSC0310771P . .

TY  - JOUR
AU  - Popov, Konstantin I.
AU  - Krstić, Snežana B.
AU  - Pavlović, Miomir
PY  - 2003
UR  - https://cer.ihtm.bg.ac.rs/handle/123456789/112
AB  - A method for the determination of the critical apparent density, which permits the free flow of electrodeposited copper powder is discussed. It was found that powders the apparent density of which were larger than 2.3 g/cm3 exhibit free flow. This is in good agreement with the literature data.
AB  - Razmatrana je metoda određivanja kritične nasipne mase, pri kojoj dolazi do tečenja elektrohemijski taloženog praha bakra. Nađeno je da tečenje postoji kod prahova čija je nasipna masa veća od 2.3 g/cm3, što je u saglasnosti sa literaturnim podacima.
PB  - Serbian Chemical Society
T2  - Journal of the Serbian Chemical Society
T1  - The critical apparent density for the free flow of copper powder
T1  - Kritična nasipna masa za tečenje praha bakra
VL  - 68
IS  - 6
SP  - 511
EP  - 513
DO  - 10.2298/JSC0306511P
ER  - 

@article{
author = "Popov, Konstantin I. and Krstić, Snežana B. and Pavlović, Miomir",
year = "2003",
abstract = "A method for the determination of the critical apparent density, which permits the free flow of electrodeposited copper powder is discussed. It was found that powders the apparent density of which were larger than 2.3 g/cm3 exhibit free flow. This is in good agreement with the literature data., Razmatrana je metoda određivanja kritične nasipne mase, pri kojoj dolazi do tečenja elektrohemijski taloženog praha bakra. Nađeno je da tečenje postoji kod prahova čija je nasipna masa veća od 2.3 g/cm3, što je u saglasnosti sa literaturnim podacima.",
publisher = "Serbian Chemical Society",
journal = "Journal of the Serbian Chemical Society",
title = "The critical apparent density for the free flow of copper powder, Kritična nasipna masa za tečenje praha bakra",
volume = "68",
number = "6",
pages = "511-513",
doi = "10.2298/JSC0306511P"
}

Popov, K. I., Krstić, S. B.,& Pavlović, M.. (2003). The critical apparent density for the free flow of copper powder. in Journal of the Serbian Chemical Society
Serbian Chemical Society., 68(6), 511-513.
https://doi.org/10.2298/JSC0306511P

Popov KI, Krstić SB, Pavlović M. The critical apparent density for the free flow of copper powder. in Journal of the Serbian Chemical Society. 2003;68(6):511-513.
doi:10.2298/JSC0306511P .

Popov, Konstantin I., Krstić, Snežana B., Pavlović, Miomir, "The critical apparent density for the free flow of copper powder" in Journal of the Serbian Chemical Society, 68, no. 6 (2003):511-513,
https://doi.org/10.2298/JSC0306511P . .