TY  - JOUR
AU  - Petronić, Sanja
AU  - Šibalija, Tatjana
AU  - Burzić, Meri
AU  - Polić, Suzana R.
AU  - Čolić, Katarina
AU  - Milovanović, Dubravka
PY  - 2016
UR  - https://cer.ihtm.bg.ac.rs/handle/123456789/6044
AB  - The paper presents a study on the surface modifications of nickel based superalloy Nimonic 263 induced by laser shock peening (LSP) process. The process was performed by Nd3+:Yttrium Aluminium Garnet (YAG) picosecond laser using the following parameters: pulse duration 170 ps; repetition rate 10 Hz; pulse numbers of 50, 100 and 200; and wavelength of 1064 nm (with pulse energy of 2 mJ, 10 mJ and 15 mJ) and 532 nm (with pulse energy of 25 mJ, 30 mJ and 35 mJ). The following response characteristics were analyzed: modified surface areas obtained by the laser/material interaction were observed by scanning electron microscopy; elemental composition of the modified surface was evaluated by energy-dispersive spectroscopy (EDS); and Vickers microhardness tests were performed. LSP processing at both 1064 nm and 532 nm wavelengths improved the surface structure and microhardness of a material. Surface morphology changes of the irradiated samples were determined and surface roughness was calculated. These investigations are intended to contribute to the study on the level of microstructure and mechanical properties improvements due to LSP process that operate in a picosecond regime. In particular, the effects of laser wavelength on the microstructural and mechanical changes of a material are studied in detail.
PB  - MDPI
T2  - Metals
T1  - Picosecond Laser Shock Peening of Nimonic 263 at 1064 nm and 532 nm Wavelength
VL  - 6
IS  - 3
DO  - 10.3390/met6030041
ER  - 

@article{
author = "Petronić, Sanja and Šibalija, Tatjana and Burzić, Meri and Polić, Suzana R. and Čolić, Katarina and Milovanović, Dubravka",
year = "2016",
abstract = "The paper presents a study on the surface modifications of nickel based superalloy Nimonic 263 induced by laser shock peening (LSP) process. The process was performed by Nd3+:Yttrium Aluminium Garnet (YAG) picosecond laser using the following parameters: pulse duration 170 ps; repetition rate 10 Hz; pulse numbers of 50, 100 and 200; and wavelength of 1064 nm (with pulse energy of 2 mJ, 10 mJ and 15 mJ) and 532 nm (with pulse energy of 25 mJ, 30 mJ and 35 mJ). The following response characteristics were analyzed: modified surface areas obtained by the laser/material interaction were observed by scanning electron microscopy; elemental composition of the modified surface was evaluated by energy-dispersive spectroscopy (EDS); and Vickers microhardness tests were performed. LSP processing at both 1064 nm and 532 nm wavelengths improved the surface structure and microhardness of a material. Surface morphology changes of the irradiated samples were determined and surface roughness was calculated. These investigations are intended to contribute to the study on the level of microstructure and mechanical properties improvements due to LSP process that operate in a picosecond regime. In particular, the effects of laser wavelength on the microstructural and mechanical changes of a material are studied in detail.",
publisher = "MDPI",
journal = "Metals",
title = "Picosecond Laser Shock Peening of Nimonic 263 at 1064 nm and 532 nm Wavelength",
volume = "6",
number = "3",
doi = "10.3390/met6030041"
}

Petronić, S., Šibalija, T., Burzić, M., Polić, S. R., Čolić, K.,& Milovanović, D.. (2016). Picosecond Laser Shock Peening of Nimonic 263 at 1064 nm and 532 nm Wavelength. in Metals
MDPI., 6(3).
https://doi.org/10.3390/met6030041

Petronić S, Šibalija T, Burzić M, Polić SR, Čolić K, Milovanović D. Picosecond Laser Shock Peening of Nimonic 263 at 1064 nm and 532 nm Wavelength. in Metals. 2016;6(3).
doi:10.3390/met6030041 .

Petronić, Sanja, Šibalija, Tatjana, Burzić, Meri, Polić, Suzana R., Čolić, Katarina, Milovanović, Dubravka, "Picosecond Laser Shock Peening of Nimonic 263 at 1064 nm and 532 nm Wavelength" in Metals, 6, no. 3 (2016),
https://doi.org/10.3390/met6030041 . .

TY  - GEN
AU  - Petronić, Sanja
AU  - Šibalija, Tatjana
AU  - Milovanović, Dubravka
AU  - Grujić, Biljana
AU  - Polić-Radovanović, Suzana R.
PY  - 2014
UR  - https://cer.ihtm.bg.ac.rs/handle/123456789/6449
AB  - Prikazano tehničko rešenje se primenjuje za poboljšanje mehaničkih osobina delova izrađenih od austenitnih materijala, pre svega superlegura nikla, koji se koriste za rad na povišenim temperaturama i pritiscima. Visoke radne temperature i pritisci zahtevaju što veću otpornost na zamor i koroziju, bolje mehaničke osobine, i osobine i strukturu površinskog sloja. Uvođenjem definisanih parametara laserske površinske obrade, odnosno optimizacijom parametara, postižu se optimalni rezultati u pogledu mikrostrukture, površinske morfologije i topografije, tvrdoće, a time i na osobine materijala: dinamičku čvrstoću, koroziju, mehaničke osobine i drugo. Oblast primene datog tehničkog rešenja se odnosi pre svega na avioindustriju, automobilsku industriju i energetiku, ali se data rešenja mogu uspešno primeniti i u nuklearnoj industriji.
PB  - Beograd : Univerzitet u Beogradu - Mašinski fakultet
T1  - Optimizacija parametara laserske površinske obrade u cilju poboljšanja mehaničkih osobina austenitnih materijala
UR  - https://hdl.handle.net/21.15107/rcub_cer_6449
ER  - 

@misc{
author = "Petronić, Sanja and Šibalija, Tatjana and Milovanović, Dubravka and Grujić, Biljana and Polić-Radovanović, Suzana R.",
year = "2014",
abstract = "Prikazano tehničko rešenje se primenjuje za poboljšanje mehaničkih osobina delova izrađenih od austenitnih materijala, pre svega superlegura nikla, koji se koriste za rad na povišenim temperaturama i pritiscima. Visoke radne temperature i pritisci zahtevaju što veću otpornost na zamor i koroziju, bolje mehaničke osobine, i osobine i strukturu površinskog sloja. Uvođenjem definisanih parametara laserske površinske obrade, odnosno optimizacijom parametara, postižu se optimalni rezultati u pogledu mikrostrukture, površinske morfologije i topografije, tvrdoće, a time i na osobine materijala: dinamičku čvrstoću, koroziju, mehaničke osobine i drugo. Oblast primene datog tehničkog rešenja se odnosi pre svega na avioindustriju, automobilsku industriju i energetiku, ali se data rešenja mogu uspešno primeniti i u nuklearnoj industriji.",
publisher = "Beograd : Univerzitet u Beogradu - Mašinski fakultet",
title = "Optimizacija parametara laserske površinske obrade u cilju poboljšanja mehaničkih osobina austenitnih materijala",
url = "https://hdl.handle.net/21.15107/rcub_cer_6449"
}

Petronić, S., Šibalija, T., Milovanović, D., Grujić, B.,& Polić-Radovanović, S. R.. (2014). Optimizacija parametara laserske površinske obrade u cilju poboljšanja mehaničkih osobina austenitnih materijala. 
Beograd : Univerzitet u Beogradu - Mašinski fakultet..
https://hdl.handle.net/21.15107/rcub_cer_6449

Petronić S, Šibalija T, Milovanović D, Grujić B, Polić-Radovanović SR. Optimizacija parametara laserske površinske obrade u cilju poboljšanja mehaničkih osobina austenitnih materijala. 2014;.
https://hdl.handle.net/21.15107/rcub_cer_6449 .

Petronić, Sanja, Šibalija, Tatjana, Milovanović, Dubravka, Grujić, Biljana, Polić-Radovanović, Suzana R., "Optimizacija parametara laserske površinske obrade u cilju poboljšanja mehaničkih osobina austenitnih materijala" (2014),
https://hdl.handle.net/21.15107/rcub_cer_6449 .

TY  - CONF
AU  - Petronić, Sanja
AU  - Milosavljević, Anđelka
AU  - Milovanović, Dubravka
AU  - Momčilović, Miloš
AU  - Babić, Violeta
AU  - Polić-Radovanović, Suzana R.
PY  - 2010
UR  - https://cer.ihtm.bg.ac.rs/handle/123456789/6226
AB  - Investigation was carried out on austenitic material samples – stainless steel and iron base superalloy that are widely used at elevated temperatures and pressures. The samples were exposed to Nd:YAG pulsed laser, with wavelength  of 1064 nm and pulse duration of 170 ps. Different pulse energy and number of pulses were applied. Spots obtained by laser interaction were observed by optical and scanning electron microscope and analyzed by energo-dispersive spectroscopy. Vickers microhardness tests were performed. In this paper, the microstructural changes, arisen by different pulse energy and number of pulses, were discussed with the aim to determine optimal laser parameters in surface treatment process.
PB  - Belgrade : Institute of Technical Sciences of the Serbian Academy of Sciences and Arts
C3  - Programme and the Book of Abstracts -  Twelfth annual conference “YUCOMAT 2010”, September 6-10, 2010, Herceg Novi
T1  - Microstructural  changes  arisen by interaction of picosecond laser with austenitic materials
VL  - XII
SP  - 136
EP  - 136
UR  - https://hdl.handle.net/21.15107/rcub_cer_6226
ER  - 

@conference{
author = "Petronić, Sanja and Milosavljević, Anđelka and Milovanović, Dubravka and Momčilović, Miloš and Babić, Violeta and Polić-Radovanović, Suzana R.",
year = "2010",
abstract = "Investigation was carried out on austenitic material samples – stainless steel and iron base superalloy that are widely used at elevated temperatures and pressures. The samples were exposed to Nd:YAG pulsed laser, with wavelength  of 1064 nm and pulse duration of 170 ps. Different pulse energy and number of pulses were applied. Spots obtained by laser interaction were observed by optical and scanning electron microscope and analyzed by energo-dispersive spectroscopy. Vickers microhardness tests were performed. In this paper, the microstructural changes, arisen by different pulse energy and number of pulses, were discussed with the aim to determine optimal laser parameters in surface treatment process.",
publisher = "Belgrade : Institute of Technical Sciences of the Serbian Academy of Sciences and Arts",
journal = "Programme and the Book of Abstracts -  Twelfth annual conference “YUCOMAT 2010”, September 6-10, 2010, Herceg Novi",
title = "Microstructural  changes  arisen by interaction of picosecond laser with austenitic materials",
volume = "XII",
pages = "136-136",
url = "https://hdl.handle.net/21.15107/rcub_cer_6226"
}

Petronić, S., Milosavljević, A., Milovanović, D., Momčilović, M., Babić, V.,& Polić-Radovanović, S. R.. (2010). Microstructural  changes  arisen by interaction of picosecond laser with austenitic materials. in Programme and the Book of Abstracts -  Twelfth annual conference “YUCOMAT 2010”, September 6-10, 2010, Herceg Novi
Belgrade : Institute of Technical Sciences of the Serbian Academy of Sciences and Arts., XII, 136-136.
https://hdl.handle.net/21.15107/rcub_cer_6226

Petronić S, Milosavljević A, Milovanović D, Momčilović M, Babić V, Polić-Radovanović SR. Microstructural  changes  arisen by interaction of picosecond laser with austenitic materials. in Programme and the Book of Abstracts -  Twelfth annual conference “YUCOMAT 2010”, September 6-10, 2010, Herceg Novi. 2010;XII:136-136.
https://hdl.handle.net/21.15107/rcub_cer_6226 .

Petronić, Sanja, Milosavljević, Anđelka, Milovanović, Dubravka, Momčilović, Miloš, Babić, Violeta, Polić-Radovanović, Suzana R., "Microstructural  changes  arisen by interaction of picosecond laser with austenitic materials" in Programme and the Book of Abstracts -  Twelfth annual conference “YUCOMAT 2010”, September 6-10, 2010, Herceg Novi, XII (2010):136-136,
https://hdl.handle.net/21.15107/rcub_cer_6226 .