TY  - JOUR
AU  - Talijan, Nadežda M.
AU  - Stajić-Trošić, Jasna
AU  - Grujić, Aleksandar
AU  - Ćosović, Vladan
AU  - Menushenkov, Vladimir
AU  - Aleksić, Radoslav
PY  - 2005
UR  - https://cer.ihtm.bg.ac.rs/handle/123456789/211
AB  - The influence on the magnetic properties of nanocristalline ribbons and powders has character of microstructure, between others – the grain size volume of hard and soft magnetic phases and their distribution. Magnetic properties of ribbons and powders depend mainly on their chemical composition and parameters of their heat treatment [1]. Technology of magnets from nanocristalline ribbon consists of the following process: preparing the Nd-Fe- B alloy, preparing the ribbon, powdering of the ribbon, heat treatment of the powder and finally preparing the magnets. Nanocomposite permanent magnet materials based on Nd-Fe- B alloy with Nd low content are a new type of permanent magnetic material. The microstructure of this nanocomposite permanent magnet is composed of a mixture of magnetically soft and hard phases which provide so called exchange coupling effect.
PB  - Technical Faculty, Bor
T2  - Journal of Mining and Metallurgy B: Metallurgy
T1  - Nanocomposite permanent magnetic materials Nd-Fe-B type: The influence of nanocomposite on magnetic properties
VL  - 41
IS  - 1
SP  - 95
EP  - 102
DO  - 10.2298/JMMB0501095T
ER  - 

@article{
author = "Talijan, Nadežda M. and Stajić-Trošić, Jasna and Grujić, Aleksandar and Ćosović, Vladan and Menushenkov, Vladimir and Aleksić, Radoslav",
year = "2005",
abstract = "The influence on the magnetic properties of nanocristalline ribbons and powders has character of microstructure, between others – the grain size volume of hard and soft magnetic phases and their distribution. Magnetic properties of ribbons and powders depend mainly on their chemical composition and parameters of their heat treatment [1]. Technology of magnets from nanocristalline ribbon consists of the following process: preparing the Nd-Fe- B alloy, preparing the ribbon, powdering of the ribbon, heat treatment of the powder and finally preparing the magnets. Nanocomposite permanent magnet materials based on Nd-Fe- B alloy with Nd low content are a new type of permanent magnetic material. The microstructure of this nanocomposite permanent magnet is composed of a mixture of magnetically soft and hard phases which provide so called exchange coupling effect.",
publisher = "Technical Faculty, Bor",
journal = "Journal of Mining and Metallurgy B: Metallurgy",
title = "Nanocomposite permanent magnetic materials Nd-Fe-B type: The influence of nanocomposite on magnetic properties",
volume = "41",
number = "1",
pages = "95-102",
doi = "10.2298/JMMB0501095T"
}

Talijan, N. M., Stajić-Trošić, J., Grujić, A., Ćosović, V., Menushenkov, V.,& Aleksić, R.. (2005). Nanocomposite permanent magnetic materials Nd-Fe-B type: The influence of nanocomposite on magnetic properties. in Journal of Mining and Metallurgy B: Metallurgy
Technical Faculty, Bor., 41(1), 95-102.
https://doi.org/10.2298/JMMB0501095T

Talijan NM, Stajić-Trošić J, Grujić A, Ćosović V, Menushenkov V, Aleksić R. Nanocomposite permanent magnetic materials Nd-Fe-B type: The influence of nanocomposite on magnetic properties. in Journal of Mining and Metallurgy B: Metallurgy. 2005;41(1):95-102.
doi:10.2298/JMMB0501095T .

Talijan, Nadežda M., Stajić-Trošić, Jasna, Grujić, Aleksandar, Ćosović, Vladan, Menushenkov, Vladimir, Aleksić, Radoslav, "Nanocomposite permanent magnetic materials Nd-Fe-B type: The influence of nanocomposite on magnetic properties" in Journal of Mining and Metallurgy B: Metallurgy, 41, no. 1 (2005):95-102,
https://doi.org/10.2298/JMMB0501095T . .

TY  - JOUR
AU  - Talijan, Nadežda
AU  - Menushenkov, Vladimir
AU  - Milutinović Nikolić, Aleksandra
AU  - Jovanović, Žarko
PY  - 1999
UR  - https://cer.ihtm.bg.ac.rs/handle/123456789/6781
AB  - Razmatran je uticaj procesnih promenljivih na mikrostrukturu i magnetna svojstva sinterovanih SmCo5 magneta. Neposredan uticaj mikrostrukture na magnetna svojstva sinterovanih uzoraka omogućava sagledavanje procesa dobijanja sinterovanih SmCo5 magneta u svetlu trijade "sinteza-struktura-svojstva.
Istraživani SmCo5 magneti su pripremani standardnim tehnikama P/M. Sinterovani uzorci podvrgnuti su SEM, mikrorendgenskoj analizi i ispitivanju magnetnih svojstava. Pogodnom matematičkom analizom utvrđena je distribucija i procentni udeo pojedinih faza. 
Konstatovano je da najbolja magnetna svojstva imaju uzorci sa najvećim udelom glavne magnetične faze i najmanjom zastupljenošću pora. S obzirom da je polazni materijal za sve dobijene uzorke prah istog kvaliteta i da su uslovi mlevenja, kompaktiranja i usmeravanja isti, jedini promenljivi procesni parametar su uslovi sinterovanja i termičke obrade. Najpovoljnija magnetna svojstva ostvarena su kod uzorka koji je sinterovan na 1140 °C, 45 minuta, uz definisan režim termičke obrade.
PB  - Savez inženjera metalurgije Srbije
T2  - Metalurgija - Journal of metallurgy
T1  - Međusobna zavisnost uslova sinterovanja, mikrostrukture i magnetnih svojstava sinterovanih SmCo5 magneta
VL  - 5
IS  - 2
SP  - 99
EP  - 105
UR  - https://hdl.handle.net/21.15107/rcub_cer_6781
ER  - 

@article{
author = "Talijan, Nadežda and Menushenkov, Vladimir and Milutinović Nikolić, Aleksandra and Jovanović, Žarko",
year = "1999",
abstract = "Razmatran je uticaj procesnih promenljivih na mikrostrukturu i magnetna svojstva sinterovanih SmCo5 magneta. Neposredan uticaj mikrostrukture na magnetna svojstva sinterovanih uzoraka omogućava sagledavanje procesa dobijanja sinterovanih SmCo5 magneta u svetlu trijade "sinteza-struktura-svojstva.
Istraživani SmCo5 magneti su pripremani standardnim tehnikama P/M. Sinterovani uzorci podvrgnuti su SEM, mikrorendgenskoj analizi i ispitivanju magnetnih svojstava. Pogodnom matematičkom analizom utvrđena je distribucija i procentni udeo pojedinih faza. 
Konstatovano je da najbolja magnetna svojstva imaju uzorci sa najvećim udelom glavne magnetične faze i najmanjom zastupljenošću pora. S obzirom da je polazni materijal za sve dobijene uzorke prah istog kvaliteta i da su uslovi mlevenja, kompaktiranja i usmeravanja isti, jedini promenljivi procesni parametar su uslovi sinterovanja i termičke obrade. Najpovoljnija magnetna svojstva ostvarena su kod uzorka koji je sinterovan na 1140 °C, 45 minuta, uz definisan režim termičke obrade.",
publisher = "Savez inženjera metalurgije Srbije",
journal = "Metalurgija - Journal of metallurgy",
title = "Međusobna zavisnost uslova sinterovanja, mikrostrukture i magnetnih svojstava sinterovanih SmCo5 magneta",
volume = "5",
number = "2",
pages = "99-105",
url = "https://hdl.handle.net/21.15107/rcub_cer_6781"
}

Talijan, N., Menushenkov, V., Milutinović Nikolić, A.,& Jovanović, Ž.. (1999). Međusobna zavisnost uslova sinterovanja, mikrostrukture i magnetnih svojstava sinterovanih SmCo5 magneta. in Metalurgija - Journal of metallurgy
Savez inženjera metalurgije Srbije., 5(2), 99-105.
https://hdl.handle.net/21.15107/rcub_cer_6781

Talijan N, Menushenkov V, Milutinović Nikolić A, Jovanović Ž. Međusobna zavisnost uslova sinterovanja, mikrostrukture i magnetnih svojstava sinterovanih SmCo5 magneta. in Metalurgija - Journal of metallurgy. 1999;5(2):99-105.
https://hdl.handle.net/21.15107/rcub_cer_6781 .

Talijan, Nadežda, Menushenkov, Vladimir, Milutinović Nikolić, Aleksandra, Jovanović, Žarko, "Međusobna zavisnost uslova sinterovanja, mikrostrukture i magnetnih svojstava sinterovanih SmCo5 magneta" in Metalurgija - Journal of metallurgy, 5, no. 2 (1999):99-105,
https://hdl.handle.net/21.15107/rcub_cer_6781 .